-- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
--
--
-- PostGIS - Spatial Types for PostgreSQL
-- http://postgis.net
-- Copyright 2001-2003 Refractions Research Inc.
--
-- This is free software; you can redistribute and/or modify it under
-- the terms of the GNU General Public Licence. See the COPYING file.
--
-- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
--
-- WARNING: Any change in this file must be evaluated for compatibility.
--          Changes cleanly handled by postgis_upgrade.sql are fine,
--	    other changes will require a bump in Major version.
--	    Currently only function replaceble by CREATE OR REPLACE
--	    are cleanly handled.
--
-- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -












SET client_min_messages TO warning;

-- INSTALL VERSION: '2.2.0'

BEGIN;

-- Check that no other postgis is installed
DO $$
DECLARE
  rec RECORD;
BEGIN
  FOR rec IN
    SELECT n.nspname, p.proname FROM pg_proc p, pg_namespace n
    WHERE p.proname = 'postgis_version'
    AND p.pronamespace = n.oid
  LOOP
    RAISE EXCEPTION 'PostGIS is already installed in schema ''%'', uninstall it first', rec.nspname;
  END LOOP;
END
$$ LANGUAGE 'plpgsql';


-- Let the user know about a deprecated signature and its new name, if any
CREATE OR REPLACE FUNCTION _postgis_deprecate(oldname text, newname text, version text)
RETURNS void AS
$$
DECLARE
  curver_text text;
BEGIN
  --
  -- Raises a NOTICE if it was deprecated in this version,
  -- a WARNING if in a previous version (only up to minor version checked)
  --
    curver_text := '2.2.0';
    IF split_part(curver_text,'.',1)::int > split_part(version,'.',1)::int OR
       ( split_part(curver_text,'.',1) = split_part(version,'.',1) AND
         split_part(curver_text,'.',2) != split_part(version,'.',2) )
    THEN
      RAISE WARNING '% signature was deprecated in %. Please use %', oldname, version, newname;
    ELSE
      RAISE DEBUG '% signature was deprecated in %. Please use %', oldname, version, newname;
    END IF;
END;
$$ LANGUAGE 'plpgsql' IMMUTABLE STRICT;

-------------------------------------------------------------------
--  SPHEROID TYPE
-------------------------------------------------------------------
CREATE OR REPLACE FUNCTION spheroid_in(cstring)
	RETURNS spheroid
	AS '$libdir/postgis-2.2','ellipsoid_in'
	LANGUAGE 'c' IMMUTABLE STRICT;

CREATE OR REPLACE FUNCTION spheroid_out(spheroid)
	RETURNS cstring
	AS '$libdir/postgis-2.2','ellipsoid_out'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 0.5.0
CREATE TYPE spheroid (
	alignment = double,
	internallength = 65,
	input = spheroid_in,
	output = spheroid_out
);

-------------------------------------------------------------------
--  GEOMETRY TYPE (lwgeom)
-------------------------------------------------------------------
CREATE OR REPLACE FUNCTION geometry_in(cstring)
	RETURNS geometry
	AS '$libdir/postgis-2.2','LWGEOM_in'
	LANGUAGE 'c' IMMUTABLE STRICT;

CREATE OR REPLACE FUNCTION geometry_out(geometry)
	RETURNS cstring
	AS '$libdir/postgis-2.2','LWGEOM_out'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION geometry_typmod_in(cstring[])
	RETURNS integer
	AS '$libdir/postgis-2.2','geometry_typmod_in'
	LANGUAGE 'c' IMMUTABLE STRICT; 

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION geometry_typmod_out(integer)
	RETURNS cstring
	AS '$libdir/postgis-2.2','postgis_typmod_out'
	LANGUAGE 'c' IMMUTABLE STRICT; 

CREATE OR REPLACE FUNCTION geometry_analyze(internal)
	RETURNS bool
	AS '$libdir/postgis-2.2', 'gserialized_analyze_nd'
	LANGUAGE 'c' VOLATILE STRICT;

CREATE OR REPLACE FUNCTION geometry_recv(internal)
	RETURNS geometry
	AS '$libdir/postgis-2.2','LWGEOM_recv'
	LANGUAGE 'c' IMMUTABLE STRICT;

CREATE OR REPLACE FUNCTION geometry_send(geometry)
	RETURNS bytea
	AS '$libdir/postgis-2.2','LWGEOM_send'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 0.1.0
CREATE TYPE geometry (
	internallength = variable,
	input = geometry_in,
	output = geometry_out,
	send = geometry_send,
	receive = geometry_recv,
	typmod_in = geometry_typmod_in,
	typmod_out = geometry_typmod_out,
	delimiter = ':',
	alignment = double,
	analyze = geometry_analyze,
	storage = main
);


-- Availability: 2.0.0
-- Special cast for enforcing the typmod restrictions
CREATE OR REPLACE FUNCTION geometry(geometry, integer, boolean)
	RETURNS geometry
	AS '$libdir/postgis-2.2','geometry_enforce_typmod'
	LANGUAGE 'c' IMMUTABLE STRICT; 

-- Availability: 2.0.0
CREATE CAST (geometry AS geometry) WITH FUNCTION geometry(geometry, integer, boolean) AS IMPLICIT;


-- Availability: 2.1.0
CREATE OR REPLACE FUNCTION geometry(point)
	RETURNS geometry
	AS '$libdir/postgis-2.2','point_to_geometry'
	LANGUAGE 'c' IMMUTABLE STRICT; 

-- Availability: 2.1.0
CREATE OR REPLACE FUNCTION point(geometry)
	RETURNS point
	AS '$libdir/postgis-2.2','geometry_to_point'
	LANGUAGE 'c' IMMUTABLE STRICT; 

-- Availability: 2.1.0
CREATE OR REPLACE FUNCTION geometry(path)
	RETURNS geometry
	AS '$libdir/postgis-2.2','path_to_geometry'
	LANGUAGE 'c' IMMUTABLE STRICT; 

-- Availability: 2.1.0
CREATE OR REPLACE FUNCTION path(geometry)
	RETURNS path
	AS '$libdir/postgis-2.2','geometry_to_path'
	LANGUAGE 'c' IMMUTABLE STRICT; 

-- Availability: 2.1.0
CREATE OR REPLACE FUNCTION geometry(polygon)
	RETURNS geometry
	AS '$libdir/postgis-2.2','polygon_to_geometry'
	LANGUAGE 'c' IMMUTABLE STRICT; 

-- Availability: 2.1.0
CREATE OR REPLACE FUNCTION polygon(geometry)
	RETURNS polygon
	AS '$libdir/postgis-2.2','geometry_to_polygon'
	LANGUAGE 'c' IMMUTABLE STRICT; 

CREATE CAST (geometry AS point) WITH FUNCTION point(geometry);
CREATE CAST (point AS geometry) WITH FUNCTION geometry(point);
CREATE CAST (geometry AS path) WITH FUNCTION path(geometry);
CREATE CAST (path AS geometry) WITH FUNCTION geometry(path);
CREATE CAST (geometry AS polygon) WITH FUNCTION polygon(geometry);
CREATE CAST (polygon AS geometry) WITH FUNCTION geometry(polygon);

-------------------------------------------------------------------
--  BOX3D TYPE
-- Point coordinate data access
-------------------------------------------
-- PostGIS equivalent function: X(geometry)
CREATE OR REPLACE FUNCTION ST_X(geometry)
	RETURNS float8
	AS '$libdir/postgis-2.2','LWGEOM_x_point'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- PostGIS equivalent function: Y(geometry)
CREATE OR REPLACE FUNCTION ST_Y(geometry)
	RETURNS float8
	AS '$libdir/postgis-2.2','LWGEOM_y_point'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_Z(geometry)
	RETURNS float8
	AS '$libdir/postgis-2.2','LWGEOM_z_point'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_M(geometry)
	RETURNS float8
	AS '$libdir/postgis-2.2','LWGEOM_m_point'
	LANGUAGE 'c' IMMUTABLE STRICT;

-------------------------------------------
-------------------------------------------------------------------

CREATE OR REPLACE FUNCTION box3d_in(cstring)
	RETURNS box3d
	AS '$libdir/postgis-2.2', 'BOX3D_in'
	LANGUAGE 'c' IMMUTABLE STRICT;

CREATE OR REPLACE FUNCTION box3d_out(box3d)
	RETURNS cstring
	AS '$libdir/postgis-2.2', 'BOX3D_out'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 0.1.0
CREATE TYPE box3d (
	alignment = double,
	internallength = 52,
	input = box3d_in,
	output = box3d_out
);

-----------------------------------------------------------------------
-- BOX2D
-----------------------------------------------------------------------

CREATE OR REPLACE FUNCTION box2d_in(cstring)
	RETURNS box2d
	AS '$libdir/postgis-2.2','BOX2D_in'
	LANGUAGE 'c' IMMUTABLE STRICT;

CREATE OR REPLACE FUNCTION box2d_out(box2d)
	RETURNS cstring
	AS '$libdir/postgis-2.2','BOX2D_out'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 0.8.2
CREATE TYPE box2d (
	internallength = 65,
	input = box2d_in,
	output = box2d_out,
	storage = plain
);

-------------------------------------------------------------------
--  BOX2DF TYPE (INTERNAL ONLY)
-------------------------------------------------------------------
--
-- Box2Df type is used by the GiST index bindings. 
-- In/out functions are stubs, as all access should be internal.
---
-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION box2df_in(cstring)
	RETURNS box2df
	AS '$libdir/postgis-2.2','box2df_in'
	LANGUAGE 'c' IMMUTABLE STRICT; 

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION box2df_out(box2df)
	RETURNS cstring
	AS '$libdir/postgis-2.2','box2df_out'
	LANGUAGE 'c' IMMUTABLE STRICT; 

-- Availability: 2.0.0
CREATE TYPE box2df (
	internallength = 16,
	input = box2df_in,
	output = box2df_out,
	storage = plain,
	alignment = double
);


-------------------------------------------------------------------
--  GIDX TYPE (INTERNAL ONLY)
-------------------------------------------------------------------
--
-- GIDX type is used by the N-D and GEOGRAPHY GiST index bindings. 
-- In/out functions are stubs, as all access should be internal.
---

-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION gidx_in(cstring)
	RETURNS gidx
	AS '$libdir/postgis-2.2','gidx_in'
	LANGUAGE 'c' IMMUTABLE STRICT; 

-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION gidx_out(gidx)
	RETURNS cstring
	AS '$libdir/postgis-2.2','gidx_out'
	LANGUAGE 'c' IMMUTABLE STRICT; 

-- Availability: 1.5.0
CREATE TYPE gidx (
	internallength = variable,
	input = gidx_in,
	output = gidx_out,
	storage = plain,
	alignment = double
);

-------------------------------------------------------------------
-- BTREE indexes
-------------------------------------------------------------------
CREATE OR REPLACE FUNCTION geometry_lt(geom1 geometry, geom2 geometry)
	RETURNS bool
	AS '$libdir/postgis-2.2', 'lwgeom_lt'
	LANGUAGE 'c' IMMUTABLE STRICT;

CREATE OR REPLACE FUNCTION geometry_le(geom1 geometry, geom2 geometry)
	RETURNS bool
	AS '$libdir/postgis-2.2', 'lwgeom_le'
	LANGUAGE 'c' IMMUTABLE STRICT;

CREATE OR REPLACE FUNCTION geometry_gt(geom1 geometry, geom2 geometry)
	RETURNS bool
	AS '$libdir/postgis-2.2', 'lwgeom_gt'
	LANGUAGE 'c' IMMUTABLE STRICT;

CREATE OR REPLACE FUNCTION geometry_ge(geom1 geometry, geom2 geometry)
	RETURNS bool
	AS '$libdir/postgis-2.2', 'lwgeom_ge'
	LANGUAGE 'c' IMMUTABLE STRICT;

CREATE OR REPLACE FUNCTION geometry_eq(geom1 geometry, geom2 geometry)
	RETURNS bool
	AS '$libdir/postgis-2.2', 'lwgeom_eq'
	LANGUAGE 'c' IMMUTABLE STRICT;

CREATE OR REPLACE FUNCTION geometry_cmp(geom1 geometry, geom2 geometry)
	RETURNS integer
	AS '$libdir/postgis-2.2', 'lwgeom_cmp'
	LANGUAGE 'c' IMMUTABLE STRICT;

--
-- Sorting operators for Btree
--

-- Availability: 0.9.0
CREATE OPERATOR < (
	LEFTARG = geometry, RIGHTARG = geometry, PROCEDURE = geometry_lt,
	COMMUTATOR = '>', NEGATOR = '>=',
	RESTRICT = contsel, JOIN = contjoinsel
);

-- Availability: 0.9.0
CREATE OPERATOR <= (
	LEFTARG = geometry, RIGHTARG = geometry, PROCEDURE = geometry_le,
	COMMUTATOR = '>=', NEGATOR = '>',
	RESTRICT = contsel, JOIN = contjoinsel
);

-- Availability: 0.9.0
CREATE OPERATOR = (
	LEFTARG = geometry, RIGHTARG = geometry, PROCEDURE = geometry_eq,
	COMMUTATOR = '=', -- we might implement a faster negator here
	RESTRICT = contsel, JOIN = contjoinsel
);

-- Availability: 0.9.0
CREATE OPERATOR >= (
	LEFTARG = geometry, RIGHTARG = geometry, PROCEDURE = geometry_ge,
	COMMUTATOR = '<=', NEGATOR = '<',
	RESTRICT = contsel, JOIN = contjoinsel
);

-- Availability: 0.9.0
CREATE OPERATOR > (
	LEFTARG = geometry, RIGHTARG = geometry, PROCEDURE = geometry_gt,
	COMMUTATOR = '<', NEGATOR = '<=',
	RESTRICT = contsel, JOIN = contjoinsel
);

-- Availability: 0.9.0
CREATE OPERATOR CLASS btree_geometry_ops
	DEFAULT FOR TYPE geometry USING btree AS
	OPERATOR	1	< ,
	OPERATOR	2	<= ,
	OPERATOR	3	= ,
	OPERATOR	4	>= ,
	OPERATOR	5	> ,
	FUNCTION	1	geometry_cmp (geom1 geometry, geom2 geometry);


-----------------------------------------------------------------------------
-- GiST 2D GEOMETRY-over-GSERIALIZED INDEX
-----------------------------------------------------------------------------

-- ---------- ---------- ---------- ---------- ---------- ---------- ----------
-- GiST Support Functions
-- ---------- ---------- ---------- ---------- ---------- ---------- ----------

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION geometry_gist_distance_2d(internal,geometry,int4) 
	RETURNS float8 
	AS '$libdir/postgis-2.2' ,'gserialized_gist_distance_2d'
	LANGUAGE 'c';

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION geometry_gist_consistent_2d(internal,geometry,int4) 
	RETURNS bool 
	AS '$libdir/postgis-2.2' ,'gserialized_gist_consistent_2d'
	LANGUAGE 'c';

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION geometry_gist_compress_2d(internal) 
	RETURNS internal 
	AS '$libdir/postgis-2.2','gserialized_gist_compress_2d'
	LANGUAGE 'c';

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION geometry_gist_penalty_2d(internal,internal,internal) 
	RETURNS internal 
	AS '$libdir/postgis-2.2' ,'gserialized_gist_penalty_2d'
	LANGUAGE 'c';

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION geometry_gist_picksplit_2d(internal, internal) 
	RETURNS internal 
	AS '$libdir/postgis-2.2' ,'gserialized_gist_picksplit_2d'
	LANGUAGE 'c';

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION geometry_gist_union_2d(bytea, internal) 
	RETURNS internal 
	AS '$libdir/postgis-2.2' ,'gserialized_gist_union_2d'
	LANGUAGE 'c';

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION geometry_gist_same_2d(geom1 geometry, geom2 geometry, internal) 
	RETURNS internal 
	AS '$libdir/postgis-2.2' ,'gserialized_gist_same_2d'
	LANGUAGE 'c';

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION geometry_gist_decompress_2d(internal) 
	RETURNS internal 
	AS '$libdir/postgis-2.2' ,'gserialized_gist_decompress_2d'
	LANGUAGE 'c';


-----------------------------------------------------------------------------

-- Availability: 2.1.0
-- Given a table, column and query geometry, returns the estimate of what proportion
-- of the table would be returned by a query using the &&/&&& operators. The mode
-- changes whether the estimate is in x/y only or in all available dimensions.
CREATE OR REPLACE FUNCTION _postgis_selectivity(tbl regclass, att_name text, geom geometry, mode text default '2')
	RETURNS float8
	AS '$libdir/postgis-2.2', '_postgis_gserialized_sel'
	LANGUAGE 'c' STRICT;

-- Availability: 2.1.0
-- Given a two tables and columns, returns estimate of the proportion of rows
-- a &&/&&& join will return relative to the number of rows an unconstrained
-- table join would return. Mode flips result between evaluation in x/y only
-- and evaluation in all available dimensions.
CREATE OR REPLACE FUNCTION _postgis_join_selectivity(regclass, text, regclass, text, text default '2')
	RETURNS float8
	AS '$libdir/postgis-2.2', '_postgis_gserialized_joinsel'
	LANGUAGE 'c' STRICT;

-- Availability: 2.1.0
-- Given a table and a column, returns the statistics information stored by 
-- PostgreSQL, in a JSON text form. Mode determines whether the 2D statistics
-- or the ND statistics are returned.
CREATE OR REPLACE FUNCTION _postgis_stats(tbl regclass, att_name text, text default '2')
	RETURNS text
	AS '$libdir/postgis-2.2', '_postgis_gserialized_stats'
	LANGUAGE 'c' STRICT;

-- Availability: 2.1.0
CREATE OR REPLACE FUNCTION gserialized_gist_sel_2d (internal, oid, internal, int4)
	RETURNS float8
	AS '$libdir/postgis-2.2', 'gserialized_gist_sel_2d'
	LANGUAGE 'c';

-- Availability: 2.1.0
CREATE OR REPLACE FUNCTION gserialized_gist_sel_nd (internal, oid, internal, int4)
	RETURNS float8
	AS '$libdir/postgis-2.2', 'gserialized_gist_sel_nd'
	LANGUAGE 'c';

-- Availability: 2.1.0
CREATE OR REPLACE FUNCTION gserialized_gist_joinsel_2d (internal, oid, internal, smallint)
	RETURNS float8
	AS '$libdir/postgis-2.2', 'gserialized_gist_joinsel_2d'
	LANGUAGE 'c';

-- Availability: 2.1.0
CREATE OR REPLACE FUNCTION gserialized_gist_joinsel_nd (internal, oid, internal, smallint)
	RETURNS float8
	AS '$libdir/postgis-2.2', 'gserialized_gist_joinsel_nd'
	LANGUAGE 'c';


-----------------------------------------------------------------------------
-- GEOMETRY Operators
-----------------------------------------------------------------------------

-- ---------- ---------- ---------- ---------- ---------- ---------- ----------
-- 2D GEOMETRY Operators
-- ---------- ---------- ---------- ---------- ---------- ---------- ----------

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION geometry_overlaps(geom1 geometry, geom2 geometry) 
	RETURNS boolean 
	AS '$libdir/postgis-2.2' ,'gserialized_overlaps_2d'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 0.1.0
-- Changed: 2.0.0 use gserialized selectivity estimators
CREATE OPERATOR && (
	LEFTARG = geometry, RIGHTARG = geometry, PROCEDURE = geometry_overlaps,
	COMMUTATOR = '&&',
 	RESTRICT = gserialized_gist_sel_2d, 
	JOIN = gserialized_gist_joinsel_2d	
);

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION geometry_same(geom1 geometry, geom2 geometry) 
	RETURNS boolean 
	AS '$libdir/postgis-2.2' ,'gserialized_same_2d'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 0.1.0
CREATE OPERATOR ~= (
	LEFTARG = geometry, RIGHTARG = geometry, PROCEDURE = geometry_same,
	RESTRICT = contsel, JOIN = contjoinsel
);

-- As of 2.2.0 this no longer returns the centroid/centroid distance, it 
-- returns the actual distance, to support the 'recheck' functionality
-- enabled in the KNN operator
-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION geometry_distance_centroid(geom1 geometry, geom2 geometry) 
	RETURNS float8 
  AS '$libdir/postgis-2.2' ,'distance'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION geometry_distance_box(geom1 geometry, geom2 geometry) 
	RETURNS float8 
  AS '$libdir/postgis-2.2' ,'gserialized_distance_box_2d'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 2.0.0
CREATE OPERATOR <-> (
    LEFTARG = geometry, RIGHTARG = geometry, PROCEDURE = geometry_distance_centroid,
    COMMUTATOR = '<->'
);

-- Availability: 2.0.0
CREATE OPERATOR <#> (
    LEFTARG = geometry, RIGHTARG = geometry, PROCEDURE = geometry_distance_box,
    COMMUTATOR = '<#>'
);

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION geometry_contains(geom1 geometry, geom2 geometry)
	RETURNS bool
	AS '$libdir/postgis-2.2', 'gserialized_contains_2d'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION geometry_within(geom1 geometry, geom2 geometry)
	RETURNS bool
	AS '$libdir/postgis-2.2', 'gserialized_within_2d'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 0.1.0
CREATE OPERATOR @ (
	LEFTARG = geometry, RIGHTARG = geometry, PROCEDURE = geometry_within,
	COMMUTATOR = '~',
	RESTRICT = contsel, JOIN = contjoinsel
);

-- Availability: 0.1.0
CREATE OPERATOR ~ (
	LEFTARG = geometry, RIGHTARG = geometry, PROCEDURE = geometry_contains,
	COMMUTATOR = '@',
	RESTRICT = contsel, JOIN = contjoinsel
);

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION geometry_left(geom1 geometry, geom2 geometry)
	RETURNS bool
	AS '$libdir/postgis-2.2', 'gserialized_left_2d'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 0.1.0
CREATE OPERATOR << (
	LEFTARG = geometry, RIGHTARG = geometry, PROCEDURE = geometry_left,
	COMMUTATOR = '>>',
	RESTRICT = positionsel, JOIN = positionjoinsel
);

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION geometry_overleft(geom1 geometry, geom2 geometry)
	RETURNS bool
	AS '$libdir/postgis-2.2', 'gserialized_overleft_2d'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 0.1.0
CREATE OPERATOR &< (
	LEFTARG = geometry, RIGHTARG = geometry, PROCEDURE = geometry_overleft,
	COMMUTATOR = '&>',
	RESTRICT = positionsel, JOIN = positionjoinsel
);

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION geometry_below(geom1 geometry, geom2 geometry)
	RETURNS bool
	AS '$libdir/postgis-2.2', 'gserialized_below_2d'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 0.1.0
CREATE OPERATOR <<| (
	LEFTARG = geometry, RIGHTARG = geometry, PROCEDURE = geometry_below,
	COMMUTATOR = '|>>',
	RESTRICT = positionsel, JOIN = positionjoinsel
);

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION geometry_overbelow(geom1 geometry, geom2 geometry)
	RETURNS bool
	AS '$libdir/postgis-2.2', 'gserialized_overbelow_2d'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 0.1.0
CREATE OPERATOR &<| (
	LEFTARG = geometry, RIGHTARG = geometry, PROCEDURE = geometry_overbelow,
	COMMUTATOR = '|&>',
	RESTRICT = positionsel, JOIN = positionjoinsel
);

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION geometry_overright(geom1 geometry, geom2 geometry)
	RETURNS bool
	AS '$libdir/postgis-2.2', 'gserialized_overright_2d'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 0.1.0
CREATE OPERATOR &> (
	LEFTARG = geometry, RIGHTARG = geometry, PROCEDURE = geometry_overright,
	COMMUTATOR = '&<',
	RESTRICT = positionsel, JOIN = positionjoinsel
);

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION geometry_right(geom1 geometry, geom2 geometry)
	RETURNS bool
	AS '$libdir/postgis-2.2', 'gserialized_right_2d'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 0.1.0
CREATE OPERATOR >> (
	LEFTARG = geometry, RIGHTARG = geometry, PROCEDURE = geometry_right,
	COMMUTATOR = '<<',
	RESTRICT = positionsel, JOIN = positionjoinsel
);

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION geometry_overabove(geom1 geometry, geom2 geometry)
	RETURNS bool
	AS '$libdir/postgis-2.2', 'gserialized_overabove_2d'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 0.1.0
CREATE OPERATOR |&> (
	LEFTARG = geometry, RIGHTARG = geometry, PROCEDURE = geometry_overabove,
	COMMUTATOR = '&<|',
	RESTRICT = positionsel, JOIN = positionjoinsel
);

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION geometry_above(geom1 geometry, geom2 geometry)
	RETURNS bool
	AS '$libdir/postgis-2.2', 'gserialized_above_2d'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 0.1.0
CREATE OPERATOR |>> (
	LEFTARG = geometry, RIGHTARG = geometry, PROCEDURE = geometry_above,
	COMMUTATOR = '<<|',
	RESTRICT = positionsel, JOIN = positionjoinsel
);

-- Availability: 2.0.0
CREATE OPERATOR CLASS gist_geometry_ops_2d
	DEFAULT FOR TYPE geometry USING GIST AS
	STORAGE box2df,
	OPERATOR        1        <<  ,
	OPERATOR        2        &<	 ,
	OPERATOR        3        &&  ,
	OPERATOR        4        &>	 ,
	OPERATOR        5        >>	 ,
	OPERATOR        6        ~=	 ,
	OPERATOR        7        ~	 ,
	OPERATOR        8        @	 ,
	OPERATOR        9        &<| ,
	OPERATOR        10       <<| ,
	OPERATOR        11       |>> ,
	OPERATOR        12       |&> ,
	OPERATOR        13       <-> FOR ORDER BY pg_catalog.float_ops,
	OPERATOR        14       <#> FOR ORDER BY pg_catalog.float_ops,
	FUNCTION        8        geometry_gist_distance_2d (internal, geometry, int4),
	FUNCTION        1        geometry_gist_consistent_2d (internal, geometry, int4),
	FUNCTION        2        geometry_gist_union_2d (bytea, internal),
	FUNCTION        3        geometry_gist_compress_2d (internal),
	FUNCTION        4        geometry_gist_decompress_2d (internal),
	FUNCTION        5        geometry_gist_penalty_2d (internal, internal, internal),
	FUNCTION        6        geometry_gist_picksplit_2d (internal, internal),
	FUNCTION        7        geometry_gist_same_2d (geom1 geometry, geom2 geometry, internal);


-----------------------------------------------------------------------------
-- GiST ND GEOMETRY-over-GSERIALIZED
-----------------------------------------------------------------------------

-- ---------- ---------- ---------- ---------- ---------- ---------- ----------
-- GiST Support Functions
-- ---------- ---------- ---------- ---------- ---------- ---------- ----------

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION geometry_gist_consistent_nd(internal,geometry,int4) 
	RETURNS bool 
	AS '$libdir/postgis-2.2' ,'gserialized_gist_consistent'
	LANGUAGE 'c';

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION geometry_gist_compress_nd(internal) 
	RETURNS internal 
	AS '$libdir/postgis-2.2','gserialized_gist_compress'
	LANGUAGE 'c';

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION geometry_gist_penalty_nd(internal,internal,internal) 
	RETURNS internal 
	AS '$libdir/postgis-2.2' ,'gserialized_gist_penalty'
	LANGUAGE 'c';

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION geometry_gist_picksplit_nd(internal, internal) 
	RETURNS internal 
	AS '$libdir/postgis-2.2' ,'gserialized_gist_picksplit'
	LANGUAGE 'c';

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION geometry_gist_union_nd(bytea, internal) 
	RETURNS internal 
	AS '$libdir/postgis-2.2' ,'gserialized_gist_union'
	LANGUAGE 'c';

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION geometry_gist_same_nd(geometry, geometry, internal) 
	RETURNS internal 
	AS '$libdir/postgis-2.2' ,'gserialized_gist_same'
	LANGUAGE 'c';

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION geometry_gist_decompress_nd(internal) 
	RETURNS internal 
	AS '$libdir/postgis-2.2' ,'gserialized_gist_decompress'
	LANGUAGE 'c';


-- ---------- ---------- ---------- ---------- ---------- ---------- ----------
-- N-D GEOMETRY Operators
-- ---------- ---------- ---------- ---------- ---------- ---------- ----------

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION geometry_overlaps_nd(geometry, geometry) 
	RETURNS boolean 
	AS '$libdir/postgis-2.2' ,'gserialized_overlaps'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 2.0.0
CREATE OPERATOR &&& (
	LEFTARG = geometry, RIGHTARG = geometry, PROCEDURE = geometry_overlaps_nd,
	COMMUTATOR = '&&&',
	RESTRICT = gserialized_gist_sel_nd,
	JOIN = gserialized_gist_joinsel_nd	
);

-- Availability: 2.2.0
CREATE OR REPLACE FUNCTION geometry_distance_centroid_nd(geometry,geometry)
	RETURNS float8
	AS '$libdir/postgis-2.2', 'gserialized_distance_nd'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 2.2.0
CREATE OPERATOR <<->> (
    LEFTARG = geometry, RIGHTARG = geometry,
    PROCEDURE = geometry_distance_centroid_nd,
    COMMUTATOR = '<<->>'
);

--
-- This is for use with |=| operator, which does not directly use
-- ST_DistanceCPA just in case it'll ever need to change behavior
-- (operators definition cannot be altered)
--
-- Availability: 2.2.0
CREATE OR REPLACE FUNCTION geometry_distance_cpa(geometry, geometry)
	RETURNS float8
	AS '$libdir/postgis-2.2', 'ST_DistanceCPA'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 2.2.0
CREATE OPERATOR |=| (
    LEFTARG = geometry, RIGHTARG = geometry,
    PROCEDURE = geometry_distance_cpa,
    COMMUTATOR = '|=|'
);

-- Availability: 2.2.0
CREATE OR REPLACE FUNCTION geometry_gist_distance_nd(internal,geometry,int4)
	RETURNS float8
	AS '$libdir/postgis-2.2', 'gserialized_gist_distance'
	LANGUAGE 'c';


-- Availability: 2.0.0
CREATE OPERATOR CLASS gist_geometry_ops_nd
	FOR TYPE geometry USING GIST AS
	STORAGE 	gidx,
	OPERATOR        3        &&&	,
--	OPERATOR        6        ~=	,
--	OPERATOR        7        ~	,
--	OPERATOR        8        @	,
	-- Availability: 2.2.0
	OPERATOR        13       <<->> FOR ORDER BY pg_catalog.float_ops,
	-- Availability: 2.2.0
	OPERATOR        20       |=| FOR ORDER BY pg_catalog.float_ops,
	-- Availability: 2.2.0
	FUNCTION        8        geometry_gist_distance_nd (internal, geometry, int4),
	FUNCTION        1        geometry_gist_consistent_nd (internal, geometry, int4),
	FUNCTION        2        geometry_gist_union_nd (bytea, internal),
	FUNCTION        3        geometry_gist_compress_nd (internal),
	FUNCTION        4        geometry_gist_decompress_nd (internal),
	FUNCTION        5        geometry_gist_penalty_nd (internal, internal, internal),
	FUNCTION        6        geometry_gist_picksplit_nd (internal, internal),
	FUNCTION        7        geometry_gist_same_nd (geometry, geometry, internal);


-- Availability: 2.2.0
CREATE OR REPLACE FUNCTION ST_ShiftLongitude(geometry)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_longitude_shift'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
-- Deprecation in 2.2.0
CREATE OR REPLACE FUNCTION ST_Shift_Longitude(geometry)
	RETURNS geometry AS
  $$ SELECT _postgis_deprecate('ST_Shift_Longitude', 'ST_ShiftLongitude', '2.2.0');
    SELECT ST_ShiftLongitude($1);
  $$
	LANGUAGE 'sql' IMMUTABLE STRICT;

-----------------------------------------------------------------------------
--  BOX3D FUNCTIONS
-----------------------------------------------------------------------------

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_XMin(box3d)
	RETURNS FLOAT8
	AS '$libdir/postgis-2.2','BOX3D_xmin'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_YMin(box3d)
	RETURNS FLOAT8
	AS '$libdir/postgis-2.2','BOX3D_ymin'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_ZMin(box3d)
	RETURNS FLOAT8
	AS '$libdir/postgis-2.2','BOX3D_zmin'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_XMax(box3d)
	RETURNS FLOAT8
	AS '$libdir/postgis-2.2','BOX3D_xmax'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_YMax(box3d)
	RETURNS FLOAT8
	AS '$libdir/postgis-2.2','BOX3D_ymax'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_ZMax(box3d)
	RETURNS FLOAT8
	AS '$libdir/postgis-2.2','BOX3D_zmax'
	LANGUAGE 'c' IMMUTABLE STRICT;

-----------------------------------------------------------------------------
--  BOX2D FUNCTIONS
-----------------------------------------------------------------------------

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_expand(box2d,float8)
	RETURNS box2d
	AS '$libdir/postgis-2.2', 'BOX2D_expand'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION postgis_getbbox(geometry)
	RETURNS box2d
	AS '$libdir/postgis-2.2','LWGEOM_to_BOX2DF'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_MakeBox2d(geom1 geometry, geom2 geometry)
	RETURNS box2d
	AS '$libdir/postgis-2.2', 'BOX2D_construct'
	LANGUAGE 'c' IMMUTABLE STRICT;

-----------------------------------------------------------------------
-- ST_ESTIMATED_EXTENT( <schema name>, <table name>, <column name> )
-----------------------------------------------------------------------

-- Availability: 2.1.0
CREATE OR REPLACE FUNCTION ST_EstimatedExtent(text,text,text) RETURNS box2d AS
	'$libdir/postgis-2.2', 'gserialized_estimated_extent'
	LANGUAGE 'c' IMMUTABLE STRICT SECURITY DEFINER;

-- Availability: 1.2.2
-- Deprecation in 2.1.0 
CREATE OR REPLACE FUNCTION ST_estimated_extent(text,text,text) RETURNS box2d AS
  $$ SELECT _postgis_deprecate('ST_Estimated_Extent', 'ST_EstimatedExtent', '2.1.0');
    -- We use security invoker instead of security definer 
    -- to prevent malicious injection of a different same named function
    SELECT ST_EstimatedExtent($1, $2, $3);
  $$
	LANGUAGE 'sql' IMMUTABLE STRICT SECURITY INVOKER;

-----------------------------------------------------------------------
-- ST_ESTIMATED_EXTENT( <table name>, <column name> )
-----------------------------------------------------------------------

-- Availability: 2.1.0
CREATE OR REPLACE FUNCTION ST_EstimatedExtent(text,text) RETURNS box2d AS
	'$libdir/postgis-2.2', 'gserialized_estimated_extent'
	LANGUAGE 'c' IMMUTABLE STRICT SECURITY DEFINER;

-- Availability: 1.2.2
-- Deprecation in 2.1.0 
CREATE OR REPLACE FUNCTION ST_estimated_extent(text,text) RETURNS box2d AS
  $$ SELECT _postgis_deprecate('ST_Estimated_Extent', 'ST_EstimatedExtent', '2.1.0');
    -- We use security invoker instead of security definer 
    -- to prevent malicious injection of a same named different function
    -- that would be run under elevated permissions
    SELECT ST_EstimatedExtent($1, $2);
  $$
	LANGUAGE 'sql' IMMUTABLE STRICT SECURITY INVOKER;

-----------------------------------------------------------------------
-- FIND_EXTENT( <schema name>, <table name>, <column name> )
-----------------------------------------------------------------------

-- Availability: 2.2.0
CREATE OR REPLACE FUNCTION ST_FindExtent(text,text,text) RETURNS box2d AS
$$
DECLARE
	schemaname alias for $1;
	tablename alias for $2;
	columnname alias for $3;
	myrec RECORD;
BEGIN
	FOR myrec IN EXECUTE 'SELECT ST_Extent("' || columnname || '") As extent FROM "' || schemaname || '"."' || tablename || '"' LOOP
		return myrec.extent;
	END LOOP;
END;
$$
LANGUAGE 'plpgsql' IMMUTABLE STRICT;

-- Availability: 1.2.2
-- Deprecation in 2.2.0
CREATE OR REPLACE FUNCTION ST_find_extent(text,text,text) RETURNS box2d AS
  $$ SELECT _postgis_deprecate('ST_Find_Extent', 'ST_FindExtent', '2.2.0');
    SELECT ST_FindExtent($1,$2,$3);
  $$
	LANGUAGE 'sql' IMMUTABLE STRICT;

-----------------------------------------------------------------------
-- FIND_EXTENT( <table name>, <column name> )
-----------------------------------------------------------------------

-- Availability: 2.2.0
CREATE OR REPLACE FUNCTION ST_FindExtent(text,text) RETURNS box2d AS
$$
DECLARE
	tablename alias for $1;
	columnname alias for $2;
	myrec RECORD;

BEGIN
	FOR myrec IN EXECUTE 'SELECT ST_Extent("' || columnname || '") As extent FROM "' || tablename || '"' LOOP
		return myrec.extent;
	END LOOP;
END;
$$
LANGUAGE 'plpgsql' IMMUTABLE STRICT;

-- Availability: 1.2.2
-- Deprecation in 2.2.0
CREATE OR REPLACE FUNCTION ST_find_extent(text,text) RETURNS box2d AS
  $$ SELECT _postgis_deprecate('ST_Find_Extent', 'ST_FindExtent', '2.2.0');
    SELECT ST_FindExtent($1,$2);
  $$
	LANGUAGE 'sql' IMMUTABLE STRICT;

-------------------------------------------
-- other lwgeom functions
-------------------------------------------
-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION postgis_addbbox(geometry)
	RETURNS geometry
	AS '$libdir/postgis-2.2','LWGEOM_addBBOX'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION postgis_dropbbox(geometry)
	RETURNS geometry
	AS '$libdir/postgis-2.2','LWGEOM_dropBBOX'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION postgis_hasbbox(geometry)
	RETURNS bool
	AS '$libdir/postgis-2.2', 'LWGEOM_hasBBOX'
	LANGUAGE 'c' IMMUTABLE STRICT;


------------------------------------------------------------------------
-- DEBUG
------------------------------------------------------------------------

-- Availability: 2.2.0
CREATE OR REPLACE FUNCTION ST_MemSize(geometry)
	RETURNS int4
	AS '$libdir/postgis-2.2', 'LWGEOM_mem_size'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
-- Deprecation in 2.2.0
CREATE OR REPLACE FUNCTION ST_mem_size(geometry)
	RETURNS int4 AS
  $$ SELECT _postgis_deprecate('ST_Mem_Size', 'ST_MemSize', '2.2.0');
    SELECT ST_MemSize($1);
  $$
	LANGUAGE 'sql' IMMUTABLE STRICT SECURITY INVOKER;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_summary(geometry)
	RETURNS text
	AS '$libdir/postgis-2.2', 'LWGEOM_summary'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_Npoints(geometry)
	RETURNS int4
	AS '$libdir/postgis-2.2', 'LWGEOM_npoints'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_nrings(geometry)
	RETURNS int4
	AS '$libdir/postgis-2.2', 'LWGEOM_nrings'
	LANGUAGE 'c' IMMUTABLE STRICT;

------------------------------------------------------------------------
-- Measures
------------------------------------------------------------------------
-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION ST_3DLength(geometry)
	RETURNS FLOAT8
	AS '$libdir/postgis-2.2', 'LWGEOM_length_linestring'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_Length2d(geometry)
	RETURNS FLOAT8
	AS '$libdir/postgis-2.2', 'LWGEOM_length2d_linestring'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- PostGIS equivalent function: length2d(geometry)
CREATE OR REPLACE FUNCTION ST_Length(geometry)
	RETURNS FLOAT8
	AS '$libdir/postgis-2.2', 'LWGEOM_length2d_linestring'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability in 2.2.0
CREATE OR REPLACE FUNCTION ST_LengthSpheroid(geometry, spheroid)
	RETURNS FLOAT8
	AS '$libdir/postgis-2.2','LWGEOM_length_ellipsoid_linestring'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;

-- this is a fake (for back-compatibility)
-- uses 3d if 3d is available, 2d otherwise
-- Availability: 2.0.0
-- Deprecation in 2.2.0
CREATE OR REPLACE FUNCTION ST_3DLength_spheroid(geometry, spheroid)
	RETURNS FLOAT8 AS
  $$ SELECT _postgis_deprecate('ST_3DLength_Spheroid', 'ST_LengthSpheroid', '2.2.0');
    SELECT ST_LengthSpheroid($1,$2);
  $$
	LANGUAGE 'sql' IMMUTABLE STRICT
	COST 100;


-- Availability: 1.2.2
-- Deprecation in 2.2.0
CREATE OR REPLACE FUNCTION ST_length_spheroid(geometry, spheroid)
	RETURNS FLOAT8 AS
  $$ SELECT _postgis_deprecate('ST_Length_Spheroid', 'ST_LengthSpheroid', '2.2.0');
    SELECT ST_LengthSpheroid($1,$2);
  $$
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 2.2.0
CREATE OR REPLACE FUNCTION ST_Length2DSpheroid(geometry, spheroid)
	RETURNS FLOAT8
	AS '$libdir/postgis-2.2','LWGEOM_length2d_ellipsoid'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;

-- Availability: 1.2.2
-- Deprecation in 2.2.0
CREATE OR REPLACE FUNCTION ST_length2d_spheroid(geometry, spheroid)
	RETURNS FLOAT8 AS
  $$ SELECT _postgis_deprecate('ST_Length2D_Spheroid', 'ST_Length2DSpheroid', '2.2.0');
    SELECT ST_Length2DSpheroid($1,$2);
  $$
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION ST_3DPerimeter(geometry)
	RETURNS FLOAT8
	AS '$libdir/postgis-2.2', 'LWGEOM_perimeter_poly'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_perimeter2d(geometry)
	RETURNS FLOAT8
	AS '$libdir/postgis-2.2', 'LWGEOM_perimeter2d_poly'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- PostGIS equivalent function: perimeter2d(geometry)
CREATE OR REPLACE FUNCTION ST_Perimeter(geometry)
	RETURNS FLOAT8
	AS '$libdir/postgis-2.2', 'LWGEOM_perimeter2d_poly'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
-- Deprecation in 1.3.4
CREATE OR REPLACE FUNCTION ST_area2d(geometry)
	RETURNS FLOAT8
	AS '$libdir/postgis-2.2', 'LWGEOM_area_polygon'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- PostGIS equivalent function: area(geometry)
CREATE OR REPLACE FUNCTION ST_Area(geometry)
	RETURNS FLOAT8
	AS '$libdir/postgis-2.2','area'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION ST_DistanceSpheroid(geom1 geometry, geom2 geometry,spheroid)
	RETURNS FLOAT8
	AS '$libdir/postgis-2.2','LWGEOM_distance_ellipsoid'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;

-- Availability: 1.2.2
-- Deprecation in 2.2.0
CREATE OR REPLACE FUNCTION ST_distance_spheroid(geom1 geometry, geom2 geometry,spheroid)
	RETURNS FLOAT8 AS
  $$ SELECT _postgis_deprecate('ST_Distance_Spheroid', 'ST_DistanceSpheroid', '2.2.0');
    SELECT ST_DistanceSpheroid($1,$2,$3);
  $$
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Minimum distance. 2d only.

-- PostGIS equivalent function: distance(geom1 geometry, geom2 geometry)
CREATE OR REPLACE FUNCTION ST_Distance(geom1 geometry, geom2 geometry)
	RETURNS float8
	AS '$libdir/postgis-2.2', 'distance'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;

-- Availability: 2.2.0
CREATE OR REPLACE FUNCTION ST_PointInsideCircle(geometry,float8,float8,float8)
	RETURNS bool
	AS '$libdir/postgis-2.2', 'LWGEOM_inside_circle_point'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
-- Deprecation in 2.2.0
CREATE OR REPLACE FUNCTION ST_point_inside_circle(geometry,float8,float8,float8)
	RETURNS bool AS
  $$ SELECT _postgis_deprecate('ST_Point_Inside_Circle', 'ST_PointInsideCircle', '2.2.0');
    SELECT ST_PointInsideCircle($1,$2,$3,$4);
  $$
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_azimuth(geom1 geometry, geom2 geometry)
	RETURNS float8
	AS '$libdir/postgis-2.2', 'LWGEOM_azimuth'
	LANGUAGE 'c' IMMUTABLE STRICT;

------------------------------------------------------------------------
-- MISC
------------------------------------------------------------------------

-- Availability: 2.1.0
CREATE OR REPLACE FUNCTION ST_Force2D(geometry)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_force_2d'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
-- Deprecation in 2.1.0
CREATE OR REPLACE FUNCTION ST_force_2d(geometry)
	RETURNS geometry AS
  $$ SELECT _postgis_deprecate('ST_Force_2d', 'ST_Force2D', '2.1.0');
    SELECT ST_Force2D($1);
  $$
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 2.1.0
CREATE OR REPLACE FUNCTION ST_Force3DZ(geometry)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_force_3dz'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
-- Deprecation in 2.1.0
CREATE OR REPLACE FUNCTION ST_force_3dz(geometry)
	RETURNS geometry AS
  $$ SELECT _postgis_deprecate('ST_Force_3dz', 'ST_Force3DZ', '2.1.0');
    SELECT ST_Force3DZ($1);
  $$
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 2.1.0
CREATE OR REPLACE FUNCTION ST_Force3D(geometry)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_force_3dz'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
-- Deprecation in 2.1.0
CREATE OR REPLACE FUNCTION ST_force_3d(geometry)
	RETURNS geometry AS
  $$ SELECT _postgis_deprecate('ST_Force_3d', 'ST_Force3D', '2.1.0');
    SELECT ST_Force3D($1);
  $$
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 2.1.0
CREATE OR REPLACE FUNCTION ST_Force3DM(geometry)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_force_3dm'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
-- Deprecation in 2.1.0
CREATE OR REPLACE FUNCTION ST_force_3dm(geometry)
	RETURNS geometry AS
  $$ SELECT _postgis_deprecate('ST_Force_3dm', 'ST_Force3DM', '2.1.0');
    SELECT ST_Force3DM($1);
  $$
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 2.1.0
CREATE OR REPLACE FUNCTION ST_Force4D(geometry)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_force_4d'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
-- Deprecation in 2.1.0
CREATE OR REPLACE FUNCTION ST_force_4d(geometry)
	RETURNS geometry AS
  $$ SELECT _postgis_deprecate('ST_Force_4d', 'ST_Force4D', '2.1.0');
    SELECT ST_Force4D($1);
  $$
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 2.1.0
CREATE OR REPLACE FUNCTION ST_ForceCollection(geometry)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_force_collection'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
-- Deprecation in 2.1.0
CREATE OR REPLACE FUNCTION ST_force_collection(geometry)
	RETURNS geometry AS
  $$ SELECT _postgis_deprecate('ST_Force_Collection', 'ST_ForceCollection', '2.1.0');
    SELECT ST_ForceCollection($1);
  $$
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION ST_CollectionExtract(geometry, integer)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'ST_CollectionExtract'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION ST_CollectionHomogenize(geometry)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'ST_CollectionHomogenize'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_Multi(geometry)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_force_multi'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 2.2.0
CREATE OR REPLACE FUNCTION ST_ForceCurve(geometry)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_force_curve'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 2.1.0
CREATE OR REPLACE FUNCTION ST_ForceSFS(geometry)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_force_sfs'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 2.1.0
CREATE OR REPLACE FUNCTION ST_ForceSFS(geometry, version text)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_force_sfs'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_Expand(box3d,float8)
	RETURNS box3d
	AS '$libdir/postgis-2.2', 'BOX3D_expand'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_Expand(geometry,float8)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_expand'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- PostGIS equivalent function: envelope(geometry)
CREATE OR REPLACE FUNCTION ST_Envelope(geometry)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_envelope'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 2.2.0
CREATE OR REPLACE FUNCTION ST_BoundingDiagonal(geom geometry, fits boolean DEFAULT false)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'ST_BoundingDiagonal'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_Reverse(geometry)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_reverse'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_ForceRHR(geometry)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_force_clockwise_poly'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION postgis_noop(geometry)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_noop'
	LANGUAGE 'c' VOLATILE STRICT;
	
-- Deprecation in 1.5.0
CREATE OR REPLACE FUNCTION ST_zmflag(geometry)
	RETURNS smallint
	AS '$libdir/postgis-2.2', 'LWGEOM_zmflag'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_NDims(geometry)
	RETURNS smallint
	AS '$libdir/postgis-2.2', 'LWGEOM_ndims'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_AsEWKT(geometry)
	RETURNS TEXT
	AS '$libdir/postgis-2.2','LWGEOM_asEWKT'
	LANGUAGE 'c' IMMUTABLE STRICT;
	
-- Availability: 2.2.0
CREATE OR REPLACE FUNCTION ST_AsTWKB(geom geometry, prec int4 default NULL, prec_z int4 default NULL, prec_m int4 default NULL, with_sizes boolean default NULL, with_boxes boolean default NULL)
	RETURNS bytea
	AS '$libdir/postgis-2.2','TWKBFromLWGEOM'
	LANGUAGE 'c' IMMUTABLE;

-- Availability: 2.2.0
CREATE OR REPLACE FUNCTION ST_AsTWKB(geom geometry[], ids bigint[], prec int4 default NULL, prec_z int4 default NULL, prec_m int4 default NULL, with_sizes boolean default NULL, with_boxes boolean default NULL)
	RETURNS bytea
	AS '$libdir/postgis-2.2','TWKBFromLWGEOMArray'
	LANGUAGE 'c' IMMUTABLE;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_AsEWKB(geometry)
	RETURNS BYTEA
	AS '$libdir/postgis-2.2','WKBFromLWGEOM'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_AsHEXEWKB(geometry)
	RETURNS TEXT
	AS '$libdir/postgis-2.2','LWGEOM_asHEXEWKB'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_AsHEXEWKB(geometry, text)
	RETURNS TEXT
	AS '$libdir/postgis-2.2','LWGEOM_asHEXEWKB'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_AsEWKB(geometry,text)
	RETURNS bytea
	AS '$libdir/postgis-2.2','WKBFromLWGEOM'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION ST_AsLatLonText(geom geometry, tmpl text DEFAULT '')
	RETURNS text
	AS '$libdir/postgis-2.2','LWGEOM_to_latlon'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Deprecation in 1.2.3
CREATE OR REPLACE FUNCTION GeomFromEWKB(bytea)
	RETURNS geometry
	AS '$libdir/postgis-2.2','LWGEOMFromEWKB'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_GeomFromEWKB(bytea)
	RETURNS geometry
	AS '$libdir/postgis-2.2','LWGEOMFromEWKB'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 2.2
CREATE OR REPLACE FUNCTION ST_GeomFromTWKB(bytea)
	RETURNS geometry
	AS '$libdir/postgis-2.2','LWGEOMFromTWKB'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Deprecation in 1.2.3
CREATE OR REPLACE FUNCTION GeomFromEWKT(text)
	RETURNS geometry
	AS '$libdir/postgis-2.2','parse_WKT_lwgeom'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_GeomFromEWKT(text)
	RETURNS geometry
	AS '$libdir/postgis-2.2','parse_WKT_lwgeom'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION postgis_cache_bbox()
	RETURNS trigger
	AS '$libdir/postgis-2.2', 'cache_bbox'
	LANGUAGE 'c';

------------------------------------------------------------------------
-- CONSTRUCTORS
------------------------------------------------------------------------

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_MakePoint(float8, float8)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_makepoint'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_MakePoint(float8, float8, float8)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_makepoint'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_MakePoint(float8, float8, float8, float8)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_makepoint'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.3.4
CREATE OR REPLACE FUNCTION ST_MakePointM(float8, float8, float8)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_makepoint3dm'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION ST_3DMakeBox(geom1 geometry, geom2 geometry)
	RETURNS box3d
	AS '$libdir/postgis-2.2', 'BOX3D_construct'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.4.0
CREATE OR REPLACE FUNCTION ST_MakeLine (geometry[])
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_makeline_garray'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_LineFromMultiPoint(geometry)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_line_from_mpoint'
	LANGUAGE 'c' IMMUTABLE STRICT;
	
-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_MakeLine(geom1 geometry, geom2 geometry)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_makeline'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_AddPoint(geom1 geometry, geom2 geometry)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_addpoint'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_AddPoint(geom1 geometry, geom2 geometry, integer)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_addpoint'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_RemovePoint(geometry, integer)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_removepoint'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_SetPoint(geometry, integer, geometry)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_setpoint_linestring'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.5.0
-- Availability: 2.0.0 - made srid optional
CREATE OR REPLACE FUNCTION ST_MakeEnvelope(float8, float8, float8, float8, integer DEFAULT 0)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'ST_MakeEnvelope'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_MakePolygon(geometry, geometry[])
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_makepoly'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_MakePolygon(geometry)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_makepoly'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_BuildArea(geometry)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'ST_BuildArea'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;

-- Availability: 1.4.0
CREATE OR REPLACE FUNCTION ST_Polygonize (geometry[])
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'polygonize_garray'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;

-- Availability: 2.2
CREATE OR REPLACE FUNCTION ST_ClusterIntersecting(geometry[])
    RETURNS geometry[]
    AS '$libdir/postgis-2.2', 'clusterintersecting_garray'
    LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 2.2
CREATE OR REPLACE FUNCTION ST_ClusterWithin(geometry[], float8)
    RETURNS geometry[]
    AS '$libdir/postgis-2.2', 'cluster_within_distance_garray'
    LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_LineMerge(geometry)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'linemerge'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;

-----------------------------------------------------------------------------
-- Affine transforms
-----------------------------------------------------------------------------

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_Affine(geometry,float8,float8,float8,float8,float8,float8,float8,float8,float8,float8,float8,float8)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_affine'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_Affine(geometry,float8,float8,float8,float8,float8,float8)
	RETURNS geometry
	AS 'SELECT ST_Affine($1,  $2, $3, 0,  $4, $5, 0,  0, 0, 1,  $6, $7, 0)'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_Rotate(geometry,float8)
	RETURNS geometry
	AS 'SELECT ST_Affine($1,  cos($2), -sin($2), 0,  sin($2), cos($2), 0,  0, 0, 1,  0, 0, 0)'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION ST_Rotate(geometry,float8,float8,float8)
	RETURNS geometry
	AS 'SELECT ST_Affine($1,  cos($2), -sin($2), 0,  sin($2),  cos($2), 0, 0, 0, 1,	$3 - cos($2) * $3 + sin($2) * $4, $4 - sin($2) * $3 - cos($2) * $4, 0)'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION ST_Rotate(geometry,float8,geometry)
	RETURNS geometry
	AS 'SELECT ST_Affine($1,  cos($2), -sin($2), 0,  sin($2),  cos($2), 0, 0, 0, 1, ST_X($3) - cos($2) * ST_X($3) + sin($2) * ST_Y($3), ST_Y($3) - sin($2) * ST_X($3) - cos($2) * ST_Y($3), 0)'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_RotateZ(geometry,float8)
	RETURNS geometry
	AS 'SELECT ST_Rotate($1, $2)'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_RotateX(geometry,float8)
	RETURNS geometry
	AS 'SELECT ST_Affine($1, 1, 0, 0, 0, cos($2), -sin($2), 0, sin($2), cos($2), 0, 0, 0)'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_RotateY(geometry,float8)
	RETURNS geometry
	AS 'SELECT ST_Affine($1,  cos($2), 0, sin($2),  0, 1, 0,  -sin($2), 0, cos($2), 0,  0, 0)'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_Translate(geometry,float8,float8,float8)
	RETURNS geometry
	AS 'SELECT ST_Affine($1, 1, 0, 0, 0, 1, 0, 0, 0, 1, $2, $3, $4)'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_Translate(geometry,float8,float8)
	RETURNS geometry
	AS 'SELECT ST_Translate($1, $2, $3, 0)'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 2.2.0
CREATE OR REPLACE FUNCTION ST_Scale(geometry,geometry)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'ST_Scale'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_Scale(geometry,float8,float8,float8)
	RETURNS geometry
	--AS 'SELECT ST_Affine($1,  $2, 0, 0,  0, $3, 0,  0, 0, $4,  0, 0, 0)'
	AS 'SELECT ST_Scale($1, ST_MakePoint($2, $3, $4))'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_Scale(geometry,float8,float8)
	RETURNS geometry
	AS 'SELECT ST_Scale($1, $2, $3, 1)'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_Transscale(geometry,float8,float8,float8,float8)
	RETURNS geometry
	AS 'SELECT ST_Affine($1,  $4, 0, 0,  0, $5, 0,
		0, 0, 1,  $2 * $4, $3 * $5, 0)'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-----------------------------------------------------------------------
-- Dumping
-----------------------------------------------------------------------

-- Availability: 1.0.0
CREATE TYPE geometry_dump AS (
	path integer[],
	geom geometry
);

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_Dump(geometry)
	RETURNS SETOF geometry_dump
	AS '$libdir/postgis-2.2', 'LWGEOM_dump'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_DumpRings(geometry)
	RETURNS SETOF geometry_dump
	AS '$libdir/postgis-2.2', 'LWGEOM_dump_rings'
	LANGUAGE 'c' IMMUTABLE STRICT;

-----------------------------------------------------------------------
-- _ST_DumpPoints()
-----------------------------------------------------------------------
-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION _ST_DumpPoints(the_geom geometry, cur_path integer[]) RETURNS SETOF geometry_dump AS $$
DECLARE
  tmp geometry_dump;
  tmp2 geometry_dump;
  nb_points integer;
  nb_geom integer;
  i integer;
  j integer;
  g geometry;
  
BEGIN
  
  -- RAISE DEBUG '%,%', cur_path, ST_GeometryType(the_geom);

  -- Special case collections : iterate and return the DumpPoints of the geometries

  IF (ST_IsCollection(the_geom)) THEN
 
    i = 1;
    FOR tmp2 IN SELECT (ST_Dump(the_geom)).* LOOP

      FOR tmp IN SELECT * FROM _ST_DumpPoints(tmp2.geom, cur_path || tmp2.path) LOOP
	    RETURN NEXT tmp;
      END LOOP;
      i = i + 1;
      
    END LOOP;

    RETURN;
  END IF;
  

  -- Special case (POLYGON) : return the points of the rings of a polygon
  IF (ST_GeometryType(the_geom) = 'ST_Polygon') THEN

    FOR tmp IN SELECT * FROM _ST_DumpPoints(ST_ExteriorRing(the_geom), cur_path || ARRAY[1]) LOOP
      RETURN NEXT tmp;
    END LOOP;
    
    j := ST_NumInteriorRings(the_geom);
    FOR i IN 1..j LOOP
        FOR tmp IN SELECT * FROM _ST_DumpPoints(ST_InteriorRingN(the_geom, i), cur_path || ARRAY[i+1]) LOOP
          RETURN NEXT tmp;
        END LOOP;
    END LOOP;
    
    RETURN;
  END IF;

  -- Special case (TRIANGLE) : return the points of the external rings of a TRIANGLE
  IF (ST_GeometryType(the_geom) = 'ST_Triangle') THEN

    FOR tmp IN SELECT * FROM _ST_DumpPoints(ST_ExteriorRing(the_geom), cur_path || ARRAY[1]) LOOP
      RETURN NEXT tmp;
    END LOOP;
    
    RETURN;
  END IF;

    
  -- Special case (POINT) : return the point
  IF (ST_GeometryType(the_geom) = 'ST_Point') THEN

    tmp.path = cur_path || ARRAY[1];
    tmp.geom = the_geom;

    RETURN NEXT tmp;
    RETURN;

  END IF;


  -- Use ST_NumPoints rather than ST_NPoints to have a NULL value if the_geom isn't
  -- a LINESTRING, CIRCULARSTRING.
  SELECT ST_NumPoints(the_geom) INTO nb_points;

  -- This should never happen
  IF (nb_points IS NULL) THEN
    RAISE EXCEPTION 'Unexpected error while dumping geometry %', ST_AsText(the_geom);
  END IF;

  FOR i IN 1..nb_points LOOP
    tmp.path = cur_path || ARRAY[i];
    tmp.geom := ST_PointN(the_geom, i);
    RETURN NEXT tmp;
  END LOOP;
   
END
$$ LANGUAGE plpgsql;

-----------------------------------------------------------------------
-- ST_DumpPoints()
-----------------------------------------------------------------------
-- This function mimicks that of ST_Dump for collections, but this function 
-- that returns a path and all the points that make up a particular geometry.
-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION ST_DumpPoints(geometry)
       	RETURNS SETOF geometry_dump
	AS '$libdir/postgis-2.2', 'LWGEOM_dumppoints'
	LANGUAGE 'c' IMMUTABLE STRICT;


-------------------------------------------------------------------
-- SPATIAL_REF_SYS
-------------------------------------------------------------------
CREATE TABLE spatial_ref_sys (
	 srid integer not null primary key
		check (srid > 0 and srid <= 998999),
	 auth_name varchar(256),
	 auth_srid integer,
	 srtext varchar(2048),
	 proj4text varchar(2048)
);


-----------------------------------------------------------------------
-- POPULATE_GEOMETRY_COLUMNS()
-----------------------------------------------------------------------
-- Truncates and refills the geometry_columns table from all tables and
-- views in the database that contain geometry columns. This function
-- is a simple wrapper for populate_geometry_columns(oid).  In essence,
-- this function ensures every geometry column in the database has the
-- appropriate spatial contraints (for tables) and exists in the
-- geometry_columns table.
-- Availability: 1.4.0
-- Revised: 2.0.0 -- no longer deletes from geometry_columns
-- Has new use_typmod option that defaults to true.  
-- If use typmod is  set to false will use old constraint behavior.
-- Will only touch table missing typmod or geometry constraints
-----------------------------------------------------------------------
CREATE OR REPLACE FUNCTION populate_geometry_columns(use_typmod boolean DEFAULT true)
	RETURNS text AS
$$
DECLARE
	inserted    integer;
	oldcount    integer;
	probed      integer;
	stale       integer;
	gcs         RECORD;
	gc          RECORD;
	gsrid       integer;
	gndims      integer;
	gtype       text;
	query       text;
	gc_is_valid boolean;

BEGIN
	SELECT count(*) INTO oldcount FROM geometry_columns;
	inserted := 0;

	-- Count the number of geometry columns in all tables and views
	SELECT count(DISTINCT c.oid) INTO probed
	FROM pg_class c,
		 pg_attribute a,
		 pg_type t,
		 pg_namespace n
	WHERE (c.relkind = 'r' OR c.relkind = 'v')
		AND t.typname = 'geometry'
		AND a.attisdropped = false
		AND a.atttypid = t.oid
		AND a.attrelid = c.oid
		AND c.relnamespace = n.oid
		AND n.nspname NOT ILIKE 'pg_temp%' AND c.relname != 'raster_columns' ;

	-- Iterate through all non-dropped geometry columns
	RAISE DEBUG 'Processing Tables.....';

	FOR gcs IN
	SELECT DISTINCT ON (c.oid) c.oid, n.nspname, c.relname
		FROM pg_class c,
			 pg_attribute a,
			 pg_type t,
			 pg_namespace n
		WHERE c.relkind = 'r'
		AND t.typname = 'geometry'
		AND a.attisdropped = false
		AND a.atttypid = t.oid
		AND a.attrelid = c.oid
		AND c.relnamespace = n.oid
		AND n.nspname NOT ILIKE 'pg_temp%' AND c.relname != 'raster_columns' 
	LOOP

		inserted := inserted + populate_geometry_columns(gcs.oid, use_typmod);
	END LOOP;

	IF oldcount > inserted THEN
	    stale = oldcount-inserted;
	ELSE
	    stale = 0;
	END IF;

	RETURN 'probed:' ||probed|| ' inserted:'||inserted;
END

$$
LANGUAGE 'plpgsql' VOLATILE;

-----------------------------------------------------------------------
-- POPULATE_GEOMETRY_COLUMNS(tbl_oid oid)
-----------------------------------------------------------------------
-- DELETEs from and reINSERTs into the geometry_columns table all entries
-- associated with the oid of a particular table or view.
--
-- If the provided oid is for a table, this function tries to determine
-- the srid, dimension, and geometry type of the all geometries
-- in the table, adding contraints as necessary to the table.  If
-- successful, an appropriate row is inserted into the geometry_columns
-- table, otherwise, the exception is caught and an error notice is
-- raised describing the problem. (This is so the wrapper function
-- populate_geometry_columns() can apply spatial constraints to all
-- geometry columns across an entire database at once without erroring
-- out)
--
-- If the provided oid is for a view, as with a table oid, this function
-- tries to determine the srid, dimension, and type of all the geometries
-- in the view, inserting appropriate entries into the geometry_columns
-- table.
-- Availability: 1.4.0
-----------------------------------------------------------------------
CREATE OR REPLACE FUNCTION populate_geometry_columns(tbl_oid oid, use_typmod boolean DEFAULT true)
	RETURNS integer AS
$$
DECLARE
	gcs         RECORD;
	gc          RECORD;
	gc_old      RECORD;
	gsrid       integer;
	gndims      integer;
	gtype       text;
	query       text;
	gc_is_valid boolean;
	inserted    integer;
	constraint_successful boolean := false;

BEGIN
	inserted := 0;

	-- Iterate through all geometry columns in this table
	FOR gcs IN
	SELECT n.nspname, c.relname, a.attname
		FROM pg_class c,
			 pg_attribute a,
			 pg_type t,
			 pg_namespace n
		WHERE c.relkind = 'r'
		AND t.typname = 'geometry'
		AND a.attisdropped = false
		AND a.atttypid = t.oid
		AND a.attrelid = c.oid
		AND c.relnamespace = n.oid
		AND n.nspname NOT ILIKE 'pg_temp%'
		AND c.oid = tbl_oid
	LOOP

        RAISE DEBUG 'Processing column %.%.%', gcs.nspname, gcs.relname, gcs.attname;
    
        gc_is_valid := true;
        -- Find the srid, coord_dimension, and type of current geometry
        -- in geometry_columns -- which is now a view
        
        SELECT type, srid, coord_dimension INTO gc_old 
            FROM geometry_columns 
            WHERE f_table_schema = gcs.nspname AND f_table_name = gcs.relname AND f_geometry_column = gcs.attname; 
            
        IF upper(gc_old.type) = 'GEOMETRY' THEN
        -- This is an unconstrained geometry we need to do something
        -- We need to figure out what to set the type by inspecting the data
            EXECUTE 'SELECT st_srid(' || quote_ident(gcs.attname) || ') As srid, GeometryType(' || quote_ident(gcs.attname) || ') As type, ST_NDims(' || quote_ident(gcs.attname) || ') As dims ' ||
                     ' FROM ONLY ' || quote_ident(gcs.nspname) || '.' || quote_ident(gcs.relname) || 
                     ' WHERE ' || quote_ident(gcs.attname) || ' IS NOT NULL LIMIT 1;'
                INTO gc;
            IF gc IS NULL THEN -- there is no data so we can not determine geometry type
            	RAISE WARNING 'No data in table %.%, so no information to determine geometry type and srid', gcs.nspname, gcs.relname;
            	RETURN 0;
            END IF;
            gsrid := gc.srid; gtype := gc.type; gndims := gc.dims;
            	
            IF use_typmod THEN
                BEGIN
                    EXECUTE 'ALTER TABLE ' || quote_ident(gcs.nspname) || '.' || quote_ident(gcs.relname) || ' ALTER COLUMN ' || quote_ident(gcs.attname) || 
                        ' TYPE geometry(' || postgis_type_name(gtype, gndims, true) || ', ' || gsrid::text  || ') ';
                    inserted := inserted + 1;
                EXCEPTION
                        WHEN invalid_parameter_value OR feature_not_supported THEN
                        RAISE WARNING 'Could not convert ''%'' in ''%.%'' to use typmod with srid %, type %: %', quote_ident(gcs.attname), quote_ident(gcs.nspname), quote_ident(gcs.relname), gsrid, postgis_type_name(gtype, gndims, true), SQLERRM;
                            gc_is_valid := false;
                END;
                
            ELSE
                -- Try to apply srid check to column
            	constraint_successful = false;
                IF (gsrid > 0 AND postgis_constraint_srid(gcs.nspname, gcs.relname,gcs.attname) IS NULL ) THEN
                    BEGIN
                        EXECUTE 'ALTER TABLE ONLY ' || quote_ident(gcs.nspname) || '.' || quote_ident(gcs.relname) || 
                                 ' ADD CONSTRAINT ' || quote_ident('enforce_srid_' || gcs.attname) || 
                                 ' CHECK (st_srid(' || quote_ident(gcs.attname) || ') = ' || gsrid || ')';
                        constraint_successful := true;
                    EXCEPTION
                        WHEN check_violation THEN
                            RAISE WARNING 'Not inserting ''%'' in ''%.%'' into geometry_columns: could not apply constraint CHECK (st_srid(%) = %)', quote_ident(gcs.attname), quote_ident(gcs.nspname), quote_ident(gcs.relname), quote_ident(gcs.attname), gsrid;
                            gc_is_valid := false;
                    END;
                END IF;
                
                -- Try to apply ndims check to column
                IF (gndims IS NOT NULL AND postgis_constraint_dims(gcs.nspname, gcs.relname,gcs.attname) IS NULL ) THEN
                    BEGIN
                        EXECUTE 'ALTER TABLE ONLY ' || quote_ident(gcs.nspname) || '.' || quote_ident(gcs.relname) || '
                                 ADD CONSTRAINT ' || quote_ident('enforce_dims_' || gcs.attname) || '
                                 CHECK (st_ndims(' || quote_ident(gcs.attname) || ') = '||gndims||')';
                        constraint_successful := true;
                    EXCEPTION
                        WHEN check_violation THEN
                            RAISE WARNING 'Not inserting ''%'' in ''%.%'' into geometry_columns: could not apply constraint CHECK (st_ndims(%) = %)', quote_ident(gcs.attname), quote_ident(gcs.nspname), quote_ident(gcs.relname), quote_ident(gcs.attname), gndims;
                            gc_is_valid := false;
                    END;
                END IF;
    
                -- Try to apply geometrytype check to column
                IF (gtype IS NOT NULL AND postgis_constraint_type(gcs.nspname, gcs.relname,gcs.attname) IS NULL ) THEN
                    BEGIN
                        EXECUTE 'ALTER TABLE ONLY ' || quote_ident(gcs.nspname) || '.' || quote_ident(gcs.relname) || '
                        ADD CONSTRAINT ' || quote_ident('enforce_geotype_' || gcs.attname) || '
                        CHECK (geometrytype(' || quote_ident(gcs.attname) || ') = ' || quote_literal(gtype) || ')';
                        constraint_successful := true;
                    EXCEPTION
                        WHEN check_violation THEN
                            -- No geometry check can be applied. This column contains a number of geometry types.
                            RAISE WARNING 'Could not add geometry type check (%) to table column: %.%.%', gtype, quote_ident(gcs.nspname),quote_ident(gcs.relname),quote_ident(gcs.attname);
                    END;
                END IF;
                 --only count if we were successful in applying at least one constraint
                IF constraint_successful THEN
                	inserted := inserted + 1;
                END IF;
            END IF;	        
	    END IF;

	END LOOP;

	RETURN inserted;
END

$$
LANGUAGE 'plpgsql' VOLATILE;

-----------------------------------------------------------------------
-- ADDGEOMETRYCOLUMN
--   <catalogue>, <schema>, <table>, <column>, <srid>, <type>, <dim>
-----------------------------------------------------------------------
--
-- Type can be one of GEOMETRY, GEOMETRYCOLLECTION, POINT, MULTIPOINT, POLYGON,
-- MULTIPOLYGON, LINESTRING, or MULTILINESTRING.
--
-- Geometry types (except GEOMETRY) are checked for consistency using a CHECK constraint.
-- Uses an ALTER TABLE command to add the geometry column to the table.
-- Addes a row to geometry_columns.
-- Addes a constraint on the table that all the geometries MUST have the same
-- SRID. Checks the coord_dimension to make sure its between 0 and 3.
-- Should also check the precision grid (future expansion).
--
-----------------------------------------------------------------------
CREATE OR REPLACE FUNCTION AddGeometryColumn(catalog_name varchar,schema_name varchar,table_name varchar,column_name varchar,new_srid_in integer,new_type varchar,new_dim integer, use_typmod boolean DEFAULT true)
	RETURNS text
	AS
$$
DECLARE
	rec RECORD;
	sr varchar;
	real_schema name;
	sql text;
	new_srid integer;

BEGIN

	-- Verify geometry type
	IF (postgis_type_name(new_type,new_dim) IS NULL )
	THEN
		RAISE EXCEPTION 'Invalid type name "%(%)" - valid ones are:
	POINT, MULTIPOINT,
	LINESTRING, MULTILINESTRING,
	POLYGON, MULTIPOLYGON,
	CIRCULARSTRING, COMPOUNDCURVE, MULTICURVE,
	CURVEPOLYGON, MULTISURFACE,
	GEOMETRY, GEOMETRYCOLLECTION,
	POINTM, MULTIPOINTM,
	LINESTRINGM, MULTILINESTRINGM,
	POLYGONM, MULTIPOLYGONM,
	CIRCULARSTRINGM, COMPOUNDCURVEM, MULTICURVEM
	CURVEPOLYGONM, MULTISURFACEM, TRIANGLE, TRIANGLEM,
	POLYHEDRALSURFACE, POLYHEDRALSURFACEM, TIN, TINM
	or GEOMETRYCOLLECTIONM', new_type, new_dim;
		RETURN 'fail';
	END IF;


	-- Verify dimension
	IF ( (new_dim >4) OR (new_dim <2) ) THEN
		RAISE EXCEPTION 'invalid dimension';
		RETURN 'fail';
	END IF;

	IF ( (new_type LIKE '%M') AND (new_dim!=3) ) THEN
		RAISE EXCEPTION 'TypeM needs 3 dimensions';
		RETURN 'fail';
	END IF;


	-- Verify SRID
	IF ( new_srid_in > 0 ) THEN
		IF new_srid_in > 998999 THEN
			RAISE EXCEPTION 'AddGeometryColumn() - SRID must be <= %', 998999;
		END IF;
		new_srid := new_srid_in;
		SELECT SRID INTO sr FROM spatial_ref_sys WHERE SRID = new_srid;
		IF NOT FOUND THEN
			RAISE EXCEPTION 'AddGeometryColumn() - invalid SRID';
			RETURN 'fail';
		END IF;
	ELSE
		new_srid := ST_SRID('POINT EMPTY'::geometry);
		IF ( new_srid_in != new_srid ) THEN
			RAISE NOTICE 'SRID value % converted to the officially unknown SRID value %', new_srid_in, new_srid;
		END IF;
	END IF;


	-- Verify schema
	IF ( schema_name IS NOT NULL AND schema_name != '' ) THEN
		sql := 'SELECT nspname FROM pg_namespace ' ||
			'WHERE text(nspname) = ' || quote_literal(schema_name) ||
			'LIMIT 1';
		RAISE DEBUG '%', sql;
		EXECUTE sql INTO real_schema;

		IF ( real_schema IS NULL ) THEN
			RAISE EXCEPTION 'Schema % is not a valid schemaname', quote_literal(schema_name);
			RETURN 'fail';
		END IF;
	END IF;

	IF ( real_schema IS NULL ) THEN
		RAISE DEBUG 'Detecting schema';
		sql := 'SELECT n.nspname AS schemaname ' ||
			'FROM pg_catalog.pg_class c ' ||
			  'JOIN pg_catalog.pg_namespace n ON n.oid = c.relnamespace ' ||
			'WHERE c.relkind = ' || quote_literal('r') ||
			' AND n.nspname NOT IN (' || quote_literal('pg_catalog') || ', ' || quote_literal('pg_toast') || ')' ||
			' AND pg_catalog.pg_table_is_visible(c.oid)' ||
			' AND c.relname = ' || quote_literal(table_name);
		RAISE DEBUG '%', sql;
		EXECUTE sql INTO real_schema;

		IF ( real_schema IS NULL ) THEN
			RAISE EXCEPTION 'Table % does not occur in the search_path', quote_literal(table_name);
			RETURN 'fail';
		END IF;
	END IF;


	-- Add geometry column to table
	IF use_typmod THEN
	     sql := 'ALTER TABLE ' ||
            quote_ident(real_schema) || '.' || quote_ident(table_name)
            || ' ADD COLUMN ' || quote_ident(column_name) ||
            ' geometry(' || postgis_type_name(new_type, new_dim) || ', ' || new_srid::text || ')';
        RAISE DEBUG '%', sql;
	ELSE
        sql := 'ALTER TABLE ' ||
            quote_ident(real_schema) || '.' || quote_ident(table_name)
            || ' ADD COLUMN ' || quote_ident(column_name) ||
            ' geometry ';
        RAISE DEBUG '%', sql;
    END IF;
	EXECUTE sql;

	IF NOT use_typmod THEN
        -- Add table CHECKs
        sql := 'ALTER TABLE ' ||
            quote_ident(real_schema) || '.' || quote_ident(table_name)
            || ' ADD CONSTRAINT '
            || quote_ident('enforce_srid_' || column_name)
            || ' CHECK (st_srid(' || quote_ident(column_name) ||
            ') = ' || new_srid::text || ')' ;
        RAISE DEBUG '%', sql;
        EXECUTE sql;
    
        sql := 'ALTER TABLE ' ||
            quote_ident(real_schema) || '.' || quote_ident(table_name)
            || ' ADD CONSTRAINT '
            || quote_ident('enforce_dims_' || column_name)
            || ' CHECK (st_ndims(' || quote_ident(column_name) ||
            ') = ' || new_dim::text || ')' ;
        RAISE DEBUG '%', sql;
        EXECUTE sql;
    
        IF ( NOT (new_type = 'GEOMETRY')) THEN
            sql := 'ALTER TABLE ' ||
                quote_ident(real_schema) || '.' || quote_ident(table_name) || ' ADD CONSTRAINT ' ||
                quote_ident('enforce_geotype_' || column_name) ||
                ' CHECK (GeometryType(' ||
                quote_ident(column_name) || ')=' ||
                quote_literal(new_type) || ' OR (' ||
                quote_ident(column_name) || ') is null)';
            RAISE DEBUG '%', sql;
            EXECUTE sql;
        END IF;
    END IF;

	RETURN
		real_schema || '.' ||
		table_name || '.' || column_name ||
		' SRID:' || new_srid::text ||
		' TYPE:' || new_type ||
		' DIMS:' || new_dim::text || ' ';
END;
$$
LANGUAGE 'plpgsql' VOLATILE STRICT;

----------------------------------------------------------------------------
-- ADDGEOMETRYCOLUMN ( <schema>, <table>, <column>, <srid>, <type>, <dim> )
----------------------------------------------------------------------------
--
-- This is a wrapper to the real AddGeometryColumn, for use
-- when catalogue is undefined
--
----------------------------------------------------------------------------
CREATE OR REPLACE FUNCTION AddGeometryColumn(schema_name varchar,table_name varchar,column_name varchar,new_srid integer,new_type varchar,new_dim integer, use_typmod boolean DEFAULT true) RETURNS text AS $$
DECLARE
	ret  text;
BEGIN
	SELECT AddGeometryColumn('',$1,$2,$3,$4,$5,$6,$7) into ret;
	RETURN ret;
END;
$$
LANGUAGE 'plpgsql' STABLE STRICT;

----------------------------------------------------------------------------
-- ADDGEOMETRYCOLUMN ( <table>, <column>, <srid>, <type>, <dim> )
----------------------------------------------------------------------------
--
-- This is a wrapper to the real AddGeometryColumn, for use
-- when catalogue and schema are undefined
--
----------------------------------------------------------------------------
CREATE OR REPLACE FUNCTION AddGeometryColumn(table_name varchar,column_name varchar,new_srid integer,new_type varchar,new_dim integer, use_typmod boolean DEFAULT true) RETURNS text AS $$
DECLARE
	ret  text;
BEGIN
	SELECT AddGeometryColumn('','',$1,$2,$3,$4,$5, $6) into ret;
	RETURN ret;
END;
$$
LANGUAGE 'plpgsql' VOLATILE STRICT;

-----------------------------------------------------------------------
-- DROPGEOMETRYCOLUMN
--   <catalogue>, <schema>, <table>, <column>
-----------------------------------------------------------------------
--
-- Removes geometry column reference from geometry_columns table.
-- Drops the column with pgsql >= 73.
-- Make some silly enforcements on it for pgsql < 73
--
-----------------------------------------------------------------------
CREATE OR REPLACE FUNCTION DropGeometryColumn(catalog_name varchar, schema_name varchar,table_name varchar,column_name varchar)
	RETURNS text
	AS
$$
DECLARE
	myrec RECORD;
	okay boolean;
	real_schema name;

BEGIN


	-- Find, check or fix schema_name
	IF ( schema_name != '' ) THEN
		okay = false;

		FOR myrec IN SELECT nspname FROM pg_namespace WHERE text(nspname) = schema_name LOOP
			okay := true;
		END LOOP;

		IF ( okay <>  true ) THEN
			RAISE NOTICE 'Invalid schema name - using current_schema()';
			SELECT current_schema() into real_schema;
		ELSE
			real_schema = schema_name;
		END IF;
	ELSE
		SELECT current_schema() into real_schema;
	END IF;

	-- Find out if the column is in the geometry_columns table
	okay = false;
	FOR myrec IN SELECT * from geometry_columns where f_table_schema = text(real_schema) and f_table_name = table_name and f_geometry_column = column_name LOOP
		okay := true;
	END LOOP;
	IF (okay <> true) THEN
		RAISE EXCEPTION 'column not found in geometry_columns table';
		RETURN false;
	END IF;

	-- Remove table column
	EXECUTE 'ALTER TABLE ' || quote_ident(real_schema) || '.' ||
		quote_ident(table_name) || ' DROP COLUMN ' ||
		quote_ident(column_name);

	RETURN real_schema || '.' || table_name || '.' || column_name ||' effectively removed.';

END;
$$
LANGUAGE 'plpgsql' VOLATILE STRICT;

-----------------------------------------------------------------------
-- DROPGEOMETRYCOLUMN
--   <schema>, <table>, <column>
-----------------------------------------------------------------------
--
-- This is a wrapper to the real DropGeometryColumn, for use
-- when catalogue is undefined
--
-----------------------------------------------------------------------
CREATE OR REPLACE FUNCTION DropGeometryColumn(schema_name varchar, table_name varchar,column_name varchar)
	RETURNS text
	AS
$$
DECLARE
	ret text;
BEGIN
	SELECT DropGeometryColumn('',$1,$2,$3) into ret;
	RETURN ret;
END;
$$
LANGUAGE 'plpgsql' VOLATILE STRICT;

-----------------------------------------------------------------------
-- DROPGEOMETRYCOLUMN
--   <table>, <column>
-----------------------------------------------------------------------
--
-- This is a wrapper to the real DropGeometryColumn, for use
-- when catalogue and schema is undefined.
--
-----------------------------------------------------------------------
CREATE OR REPLACE FUNCTION DropGeometryColumn(table_name varchar, column_name varchar)
	RETURNS text
	AS
$$
DECLARE
	ret text;
BEGIN
	SELECT DropGeometryColumn('','',$1,$2) into ret;
	RETURN ret;
END;
$$
LANGUAGE 'plpgsql' VOLATILE STRICT;

-----------------------------------------------------------------------
-- DROPGEOMETRYTABLE
--   <catalogue>, <schema>, <table>
-----------------------------------------------------------------------
--
-- Drop a table and all its references in geometry_columns
--
-----------------------------------------------------------------------
CREATE OR REPLACE FUNCTION DropGeometryTable(catalog_name varchar, schema_name varchar, table_name varchar)
	RETURNS text
	AS
$$
DECLARE
	real_schema name;

BEGIN

	IF ( schema_name = '' ) THEN
		SELECT current_schema() into real_schema;
	ELSE
		real_schema = schema_name;
	END IF;

	-- TODO: Should we warn if table doesn't exist probably instead just saying dropped
	-- Remove table
	EXECUTE 'DROP TABLE IF EXISTS '
		|| quote_ident(real_schema) || '.' ||
		quote_ident(table_name) || ' RESTRICT';

	RETURN
		real_schema || '.' ||
		table_name ||' dropped.';

END;
$$
LANGUAGE 'plpgsql' VOLATILE STRICT;

-----------------------------------------------------------------------
-- DROPGEOMETRYTABLE
--   <schema>, <table>
-----------------------------------------------------------------------
--
-- Drop a table and all its references in geometry_columns
--
-----------------------------------------------------------------------
CREATE OR REPLACE FUNCTION DropGeometryTable(schema_name varchar, table_name varchar) RETURNS text AS
$$ SELECT DropGeometryTable('',$1,$2) $$
LANGUAGE 'sql' VOLATILE STRICT;

-----------------------------------------------------------------------
-- DROPGEOMETRYTABLE
--   <table>
-----------------------------------------------------------------------
--
-- Drop a table and all its references in geometry_columns
-- For PG>=73 use current_schema()
--
-----------------------------------------------------------------------
CREATE OR REPLACE FUNCTION DropGeometryTable(table_name varchar) RETURNS text AS
$$ SELECT DropGeometryTable('','',$1) $$
LANGUAGE 'sql' VOLATILE STRICT;

-----------------------------------------------------------------------
-- UPDATEGEOMETRYSRID
--   <catalogue>, <schema>, <table>, <column>, <srid>
-----------------------------------------------------------------------
--
-- Change SRID of all features in a spatially-enabled table
--
-----------------------------------------------------------------------
-- Changed: 2.1.4 check against real_schema
CREATE OR REPLACE FUNCTION UpdateGeometrySRID(catalogn_name varchar,schema_name varchar,table_name varchar,column_name varchar,new_srid_in integer)
	RETURNS text
	AS
$$
DECLARE
	myrec RECORD;
	okay boolean;
	cname varchar;
	real_schema name;
	unknown_srid integer;
	new_srid integer := new_srid_in;

BEGIN


	-- Find, check or fix schema_name
	IF ( schema_name != '' ) THEN
		okay = false;

		FOR myrec IN SELECT nspname FROM pg_namespace WHERE text(nspname) = schema_name LOOP
			okay := true;
		END LOOP;

		IF ( okay <> true ) THEN
			RAISE EXCEPTION 'Invalid schema name';
		ELSE
			real_schema = schema_name;
		END IF;
	ELSE
		SELECT INTO real_schema current_schema()::text;
	END IF;

	-- Ensure that column_name is in geometry_columns
	okay = false;
	FOR myrec IN SELECT type, coord_dimension FROM geometry_columns WHERE f_table_schema = text(real_schema) and f_table_name = table_name and f_geometry_column = column_name LOOP
		okay := true;
	END LOOP;
	IF (NOT okay) THEN
		RAISE EXCEPTION 'column not found in geometry_columns table';
		RETURN false;
	END IF;

	-- Ensure that new_srid is valid
	IF ( new_srid > 0 ) THEN
		IF ( SELECT count(*) = 0 from spatial_ref_sys where srid = new_srid ) THEN
			RAISE EXCEPTION 'invalid SRID: % not found in spatial_ref_sys', new_srid;
			RETURN false;
		END IF;
	ELSE
		unknown_srid := ST_SRID('POINT EMPTY'::geometry);
		IF ( new_srid != unknown_srid ) THEN
			new_srid := unknown_srid;
			RAISE NOTICE 'SRID value % converted to the officially unknown SRID value %', new_srid_in, new_srid;
		END IF;
	END IF;

	IF postgis_constraint_srid(real_schema, table_name, column_name) IS NOT NULL THEN 
	-- srid was enforced with constraints before, keep it that way.
        -- Make up constraint name
        cname = 'enforce_srid_'  || column_name;
    
        -- Drop enforce_srid constraint
        EXECUTE 'ALTER TABLE ' || quote_ident(real_schema) ||
            '.' || quote_ident(table_name) ||
            ' DROP constraint ' || quote_ident(cname);
    
        -- Update geometries SRID
        EXECUTE 'UPDATE ' || quote_ident(real_schema) ||
            '.' || quote_ident(table_name) ||
            ' SET ' || quote_ident(column_name) ||
            ' = ST_SetSRID(' || quote_ident(column_name) ||
            ', ' || new_srid::text || ')';
            
        -- Reset enforce_srid constraint
        EXECUTE 'ALTER TABLE ' || quote_ident(real_schema) ||
            '.' || quote_ident(table_name) ||
            ' ADD constraint ' || quote_ident(cname) ||
            ' CHECK (st_srid(' || quote_ident(column_name) ||
            ') = ' || new_srid::text || ')';
    ELSE 
        -- We will use typmod to enforce if no srid constraints
        -- We are using postgis_type_name to lookup the new name 
        -- (in case Paul changes his mind and flips geometry_columns to return old upper case name) 
        EXECUTE 'ALTER TABLE ' || quote_ident(real_schema) || '.' || quote_ident(table_name) || 
        ' ALTER COLUMN ' || quote_ident(column_name) || ' TYPE  geometry(' || postgis_type_name(myrec.type, myrec.coord_dimension, true) || ', ' || new_srid::text || ') USING ST_SetSRID(' || quote_ident(column_name) || ',' || new_srid::text || ');' ;
    END IF;

	RETURN real_schema || '.' || table_name || '.' || column_name ||' SRID changed to ' || new_srid::text;

END;
$$
LANGUAGE 'plpgsql' VOLATILE STRICT;

-----------------------------------------------------------------------
-- UPDATEGEOMETRYSRID
--   <schema>, <table>, <column>, <srid>
-----------------------------------------------------------------------
CREATE OR REPLACE FUNCTION UpdateGeometrySRID(varchar,varchar,varchar,integer)
	RETURNS text
	AS $$
DECLARE
	ret  text;
BEGIN
	SELECT UpdateGeometrySRID('',$1,$2,$3,$4) into ret;
	RETURN ret;
END;
$$
LANGUAGE 'plpgsql' VOLATILE STRICT;

-----------------------------------------------------------------------
-- UPDATEGEOMETRYSRID
--   <table>, <column>, <srid>
-----------------------------------------------------------------------
CREATE OR REPLACE FUNCTION UpdateGeometrySRID(varchar,varchar,integer)
	RETURNS text
	AS $$
DECLARE
	ret  text;
BEGIN
	SELECT UpdateGeometrySRID('','',$1,$2,$3) into ret;
	RETURN ret;
END;
$$
LANGUAGE 'plpgsql' VOLATILE STRICT;

-----------------------------------------------------------------------
-- FIND_SRID( <schema>, <table>, <geom col> )
-----------------------------------------------------------------------
-- Changed: 2.1.8 improve performance
CREATE OR REPLACE FUNCTION find_srid(varchar,varchar,varchar) RETURNS int4 AS
$$
DECLARE
	schem varchar =  $1;
	tabl varchar = $2;
	sr int4;
BEGIN
-- if the table contains a . and the schema is empty
-- split the table into a schema and a table
-- otherwise drop through to default behavior
	IF ( schem = '' and strpos(tabl,'.') > 0 ) THEN
	 schem = substr(tabl,1,strpos(tabl,'.')-1);
	 tabl = substr(tabl,length(schem)+2);
	END IF;

	select SRID into sr from geometry_columns where (f_table_schema = schem or schem = '') and f_table_name = tabl and f_geometry_column = $3;
	IF NOT FOUND THEN
	   RAISE EXCEPTION 'find_srid() - couldnt find the corresponding SRID - is the geometry registered in the GEOMETRY_COLUMNS table?  Is there an uppercase/lowercase missmatch?';
	END IF;
	return sr;
END;
$$
LANGUAGE 'plpgsql' IMMUTABLE STRICT;


---------------------------------------------------------------
-- PROJ support
---------------------------------------------------------------

CREATE OR REPLACE FUNCTION get_proj4_from_srid(integer) RETURNS text AS
$$
BEGIN
	RETURN proj4text::text FROM spatial_ref_sys WHERE srid= $1;
END;
$$
LANGUAGE 'plpgsql' IMMUTABLE STRICT;

CREATE OR REPLACE FUNCTION postgis_transform_geometry(geometry,text,text,int)
	RETURNS geometry
	AS '$libdir/postgis-2.2','transform_geom'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- PostGIS equivalent of old function: transform(geometry,integer)
CREATE OR REPLACE FUNCTION ST_Transform(geometry,integer)
	RETURNS geometry
	AS '$libdir/postgis-2.2','transform'
	LANGUAGE 'c' IMMUTABLE STRICT;


-----------------------------------------------------------------------
-- POSTGIS_VERSION()
-----------------------------------------------------------------------

CREATE OR REPLACE FUNCTION postgis_version() RETURNS text
	AS '$libdir/postgis-2.2'
	LANGUAGE 'c' IMMUTABLE;

CREATE OR REPLACE FUNCTION postgis_liblwgeom_version() RETURNS text
	AS '$libdir/postgis-2.2'
	LANGUAGE 'c' IMMUTABLE;

CREATE OR REPLACE FUNCTION postgis_proj_version() RETURNS text
	AS '$libdir/postgis-2.2'
	LANGUAGE 'c' IMMUTABLE;

--
-- IMPORTANT:
-- Starting at 1.1.0 this function is used by postgis_proc_upgrade.pl
-- to extract version of postgis being installed.
-- Do not modify this w/out also changing postgis_proc_upgrade.pl
--
CREATE OR REPLACE FUNCTION postgis_scripts_installed() RETURNS text
	AS $$ SELECT '2.2.0'::text || ' r' || 14208::text AS version $$
	LANGUAGE 'sql' IMMUTABLE;

CREATE OR REPLACE FUNCTION postgis_lib_version() RETURNS text
	AS '$libdir/postgis-2.2'
	LANGUAGE 'c' IMMUTABLE; -- a new lib will require a new session

-- NOTE: from 1.1.0 to 1.5.x this was the same of postgis_lib_version()
-- NOTE: from 2.0.0 up it includes postgis_svn_revision()
CREATE OR REPLACE FUNCTION postgis_scripts_released() RETURNS text
	AS '$libdir/postgis-2.2'
	LANGUAGE 'c' IMMUTABLE;

CREATE OR REPLACE FUNCTION postgis_geos_version() RETURNS text
	AS '$libdir/postgis-2.2'
	LANGUAGE 'c' IMMUTABLE;

CREATE OR REPLACE FUNCTION postgis_svn_version() RETURNS text
	AS '$libdir/postgis-2.2'
	LANGUAGE 'c' IMMUTABLE;

CREATE OR REPLACE FUNCTION postgis_libxml_version() RETURNS text
	AS '$libdir/postgis-2.2'
	LANGUAGE 'c' IMMUTABLE;

CREATE OR REPLACE FUNCTION postgis_scripts_build_date() RETURNS text
	AS 'SELECT ''2015-11-17 22:08:24''::text AS version'
	LANGUAGE 'sql' IMMUTABLE;

CREATE OR REPLACE FUNCTION postgis_lib_build_date() RETURNS text
	AS '$libdir/postgis-2.2'
	LANGUAGE 'c' IMMUTABLE;

CREATE OR REPLACE FUNCTION postgis_full_version() RETURNS text
AS $$
DECLARE
	libver text;
	svnver text;
	projver text;
	geosver text;
	sfcgalver text;
	cgalver text;
	gdalver text;
	libxmlver text;
	liblwgeomver text;
	dbproc text;
	relproc text;
	fullver text;
	rast_lib_ver text;
	rast_scr_ver text;
	topo_scr_ver text;
	json_lib_ver text;
	sfcgal_lib_ver text;
	sfcgal_scr_ver text;
BEGIN
	SELECT postgis_lib_version() INTO libver;
	SELECT postgis_proj_version() INTO projver;
	SELECT postgis_geos_version() INTO geosver;
	SELECT postgis_libjson_version() INTO json_lib_ver;
	BEGIN
		SELECT postgis_gdal_version() INTO gdalver;
	EXCEPTION
		WHEN undefined_function THEN
			gdalver := NULL;
			RAISE NOTICE 'Function postgis_gdal_version() not found.  Is raster support enabled and rtpostgis.sql installed?';
	END;
	BEGIN
		SELECT postgis_sfcgal_version() INTO sfcgalver;
    BEGIN
      SELECT postgis_sfcgal_scripts_installed() INTO sfcgal_scr_ver;
    EXCEPTION
      WHEN undefined_function THEN
        sfcgal_scr_ver := 'missing';
    END;
	EXCEPTION
		WHEN undefined_function THEN
			sfcgalver := NULL;
	END;
	SELECT postgis_liblwgeom_version() INTO liblwgeomver;
	SELECT postgis_libxml_version() INTO libxmlver;
	SELECT postgis_scripts_installed() INTO dbproc;
	SELECT postgis_scripts_released() INTO relproc;
	select postgis_svn_version() INTO svnver;
	BEGIN
		SELECT topology.postgis_topology_scripts_installed() INTO topo_scr_ver;
	EXCEPTION
		WHEN undefined_function OR invalid_schema_name THEN
			topo_scr_ver := NULL;
			RAISE DEBUG 'Function postgis_topology_scripts_installed() not found. Is topology support enabled and topology.sql installed?';
		WHEN insufficient_privilege THEN
			RAISE NOTICE 'Topology support cannot be inspected. Is current user granted USAGE on schema "topology" ?';
		WHEN OTHERS THEN
			RAISE NOTICE 'Function postgis_topology_scripts_installed() could not be called: % (%)', SQLERRM, SQLSTATE;
	END;

	BEGIN
		SELECT postgis_raster_scripts_installed() INTO rast_scr_ver;
	EXCEPTION
		WHEN undefined_function THEN
			rast_scr_ver := NULL;
			RAISE NOTICE 'Function postgis_raster_scripts_installed() not found. Is raster support enabled and rtpostgis.sql installed?';
	END;

	BEGIN
		SELECT postgis_raster_lib_version() INTO rast_lib_ver;
	EXCEPTION
		WHEN undefined_function THEN
			rast_lib_ver := NULL;
			RAISE NOTICE 'Function postgis_raster_lib_version() not found. Is raster support enabled and rtpostgis.sql installed?';
	END;

	fullver = 'POSTGIS="' || libver;

	IF  svnver IS NOT NULL THEN
		fullver = fullver || ' r' || svnver;
	END IF;

	fullver = fullver || '"';

	IF liblwgeomver != relproc THEN
		fullver = fullver || ' (liblwgeom version mismatch: "' || liblwgeomver || '")';
	END IF;


	IF  geosver IS NOT NULL THEN
		fullver = fullver || ' GEOS="' || geosver || '"';
	END IF;

	IF  sfcgalver IS NOT NULL THEN
		fullver = fullver || ' SFCGAL="' || sfcgalver || '"';
	END IF;

	IF  projver IS NOT NULL THEN
		fullver = fullver || ' PROJ="' || projver || '"';
	END IF;

	IF  gdalver IS NOT NULL THEN
		fullver = fullver || ' GDAL="' || gdalver || '"';
	END IF;

	IF  libxmlver IS NOT NULL THEN
		fullver = fullver || ' LIBXML="' || libxmlver || '"';
	END IF;

	IF json_lib_ver IS NOT NULL THEN
		fullver = fullver || ' LIBJSON="' || json_lib_ver || '"';
	END IF;

	-- fullver = fullver || ' DBPROC="' || dbproc || '"';
	-- fullver = fullver || ' RELPROC="' || relproc || '"';

	IF dbproc != relproc THEN
		fullver = fullver || ' (core procs from "' || dbproc || '" need upgrade)';
	END IF;

	IF topo_scr_ver IS NOT NULL THEN
		fullver = fullver || ' TOPOLOGY';
		IF topo_scr_ver != relproc THEN
			fullver = fullver || ' (topology procs from "' || topo_scr_ver || '" need upgrade)';
		END IF;
	END IF;

	IF rast_lib_ver IS NOT NULL THEN
		fullver = fullver || ' RASTER';
		IF rast_lib_ver != relproc THEN
			fullver = fullver || ' (raster lib from "' || rast_lib_ver || '" need upgrade)';
		END IF;
	END IF;

	IF rast_scr_ver IS NOT NULL AND rast_scr_ver != relproc THEN
		fullver = fullver || ' (raster procs from "' || rast_scr_ver || '" need upgrade)';
	END IF;

	IF sfcgal_scr_ver IS NOT NULL AND sfcgal_scr_ver != relproc THEN
    fullver = fullver || ' (sfcgal procs from "' || sfcgal_scr_ver || '" need upgrade)';
	END IF;

	RETURN fullver;
END
$$
LANGUAGE 'plpgsql' IMMUTABLE;

---------------------------------------------------------------
-- CASTS
---------------------------------------------------------------
		
CREATE OR REPLACE FUNCTION box2d(geometry)
	RETURNS box2d
	AS '$libdir/postgis-2.2','LWGEOM_to_BOX2D'
	LANGUAGE 'c' IMMUTABLE STRICT;

CREATE OR REPLACE FUNCTION box3d(geometry)
	RETURNS box3d
	AS '$libdir/postgis-2.2','LWGEOM_to_BOX3D'
	LANGUAGE 'c' IMMUTABLE STRICT;

CREATE OR REPLACE FUNCTION box(geometry)
	RETURNS box
	AS '$libdir/postgis-2.2','LWGEOM_to_BOX'
	LANGUAGE 'c' IMMUTABLE STRICT;

CREATE OR REPLACE FUNCTION box2d(box3d)
	RETURNS box2d
	AS '$libdir/postgis-2.2','BOX3D_to_BOX2D'
	LANGUAGE 'c' IMMUTABLE STRICT;

CREATE OR REPLACE FUNCTION box3d(box2d)
	RETURNS box3d
	AS '$libdir/postgis-2.2','BOX2D_to_BOX3D'
	LANGUAGE 'c' IMMUTABLE STRICT;

CREATE OR REPLACE FUNCTION box(box3d)
	RETURNS box
	AS '$libdir/postgis-2.2','BOX3D_to_BOX'
	LANGUAGE 'c' IMMUTABLE STRICT;

CREATE OR REPLACE FUNCTION text(geometry)
	RETURNS text
	AS '$libdir/postgis-2.2','LWGEOM_to_text'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- this is kept for backward-compatibility
-- Deprecation in 1.2.3
CREATE OR REPLACE FUNCTION box3dtobox(box3d)
	RETURNS box
	AS '$libdir/postgis-2.2','BOX3D_to_BOX'
	LANGUAGE 'c' IMMUTABLE STRICT;

CREATE OR REPLACE FUNCTION geometry(box2d)
	RETURNS geometry
	AS '$libdir/postgis-2.2','BOX2D_to_LWGEOM'
	LANGUAGE 'c' IMMUTABLE STRICT;

CREATE OR REPLACE FUNCTION geometry(box3d)
	RETURNS geometry
	AS '$libdir/postgis-2.2','BOX3D_to_LWGEOM'
	LANGUAGE 'c' IMMUTABLE STRICT;

CREATE OR REPLACE FUNCTION geometry(text)
	RETURNS geometry
	AS '$libdir/postgis-2.2','parse_WKT_lwgeom'
	LANGUAGE 'c' IMMUTABLE STRICT;

CREATE OR REPLACE FUNCTION geometry(bytea)
	RETURNS geometry
	AS '$libdir/postgis-2.2','LWGEOM_from_bytea'
	LANGUAGE 'c' IMMUTABLE STRICT;

CREATE OR REPLACE FUNCTION bytea(geometry)
	RETURNS bytea
	AS '$libdir/postgis-2.2','LWGEOM_to_bytea'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- 7.3+ explicit casting definitions
CREATE CAST (geometry AS box2d) WITH FUNCTION box2d(geometry) AS IMPLICIT;
CREATE CAST (geometry AS box3d) WITH FUNCTION box3d(geometry) AS IMPLICIT;

-- ticket: 2262 changed 2.1.0 to assignment to prevent PostGIS 
-- from misusing PostgreSQL geometric functions
CREATE CAST (geometry AS box) WITH FUNCTION box(geometry) AS ASSIGNMENT;

CREATE CAST (box3d AS box2d) WITH FUNCTION box2d(box3d) AS IMPLICIT;
CREATE CAST (box2d AS box3d) WITH FUNCTION box3d(box2d) AS IMPLICIT;
CREATE CAST (box2d AS geometry) WITH FUNCTION geometry(box2d) AS IMPLICIT;
CREATE CAST (box3d AS box) WITH FUNCTION box(box3d) AS IMPLICIT;
CREATE CAST (box3d AS geometry) WITH FUNCTION geometry(box3d) AS IMPLICIT;
CREATE CAST (text AS geometry) WITH FUNCTION geometry(text) AS IMPLICIT;
CREATE CAST (geometry AS text) WITH FUNCTION text(geometry) AS IMPLICIT;
CREATE CAST (bytea AS geometry) WITH FUNCTION geometry(bytea) AS IMPLICIT;
CREATE CAST (geometry AS bytea) WITH FUNCTION bytea(geometry) AS IMPLICIT;


---------------------------------------------------------------
-- Algorithms
---------------------------------------------------------------

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_Simplify(geometry, float8)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_simplify2d'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 2.2.0
CREATE OR REPLACE FUNCTION ST_Simplify(geometry, float8, boolean)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_simplify2d'
	LANGUAGE 'c' IMMUTABLE STRICT;
	
-- Availability: 2.2.0
CREATE OR REPLACE FUNCTION ST_SimplifyVW(geometry,  float8)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_SetEffectiveArea'
	LANGUAGE 'c' IMMUTABLE STRICT;
	
-- Availability: 2.2.0
CREATE OR REPLACE FUNCTION ST_SetEffectiveArea(geometry,  float8 default -1, integer default 1)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_SetEffectiveArea'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- ST_SnapToGrid(input, xoff, yoff, xsize, ysize)
-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_SnapToGrid(geometry, float8, float8, float8, float8)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_snaptogrid'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- ST_SnapToGrid(input, xsize, ysize) # offsets=0
-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_SnapToGrid(geometry, float8, float8)
	RETURNS geometry
	AS 'SELECT ST_SnapToGrid($1, 0, 0, $2, $3)'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- ST_SnapToGrid(input, size) # xsize=ysize=size, offsets=0
-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_SnapToGrid(geometry, float8)
	RETURNS geometry
	AS 'SELECT ST_SnapToGrid($1, 0, 0, $2, $2)'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- ST_SnapToGrid(input, point_offsets, xsize, ysize, zsize, msize)
-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_SnapToGrid(geom1 geometry, geom2 geometry, float8, float8, float8, float8)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_snaptogrid_pointoff'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_Segmentize(geometry, float8)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_segmentize2d'
	LANGUAGE 'c' IMMUTABLE STRICT;

---------------------------------------------------------------
-- LRS
---------------------------------------------------------------

-- Availability: 2.1.0
CREATE OR REPLACE FUNCTION ST_LineInterpolatePoint(geometry, float8)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_line_interpolate_point'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
-- Deprecation in 2.1.0 
CREATE OR REPLACE FUNCTION ST_line_interpolate_point(geometry, float8)
	RETURNS geometry AS
  $$ SELECT _postgis_deprecate('ST_Line_Interpolate_Point', 'ST_LineInterpolatePoint', '2.1.0');
    SELECT ST_LineInterpolatePoint($1, $2);
  $$
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 2.1.0
CREATE OR REPLACE FUNCTION ST_LineSubstring(geometry, float8, float8)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_line_substring'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
-- Deprecation in 2.1.0 
CREATE OR REPLACE FUNCTION ST_line_substring(geometry, float8, float8)
	RETURNS geometry AS
  $$ SELECT _postgis_deprecate('ST_Line_Substring', 'ST_LineSubstring', '2.1.0');
     SELECT ST_LineSubstring($1, $2, $3);
  $$
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 2.1.0
CREATE OR REPLACE FUNCTION ST_LineLocatePoint(geom1 geometry, geom2 geometry)
	RETURNS float8
	AS '$libdir/postgis-2.2', 'LWGEOM_line_locate_point'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
-- Deprecation in 2.1.0 
CREATE OR REPLACE FUNCTION ST_line_locate_point(geom1 geometry, geom2 geometry)
	RETURNS float8 AS
  $$ SELECT _postgis_deprecate('ST_Line_Locate_Point', 'ST_LineLocatePoint', '2.1.0');
     SELECT ST_LineLocatePoint($1, $2);
  $$
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 1.2.2
-- Deprecation in 2.0.0 replaced by ST_LocateBetween
-- TODO: switch to use of _postgis_deprecate() in 2.3.0 (or drop)
CREATE OR REPLACE FUNCTION ST_locate_between_measures(geometry, float8, float8)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_locate_between_m'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
-- Deprecation in 2.0.0 replaced by ST_LocateAlong
-- TODO: switch to use of _postgis_deprecate() in 2.3.0 (or drop)
CREATE OR REPLACE FUNCTION ST_locate_along_measure(geometry, float8)
	RETURNS geometry
	AS $$ SELECT ST_locate_between_measures($1, $2, $2) $$
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION ST_AddMeasure(geometry, float8, float8) 
	RETURNS geometry 
	AS '$libdir/postgis-2.2', 'ST_AddMeasure' 
	LANGUAGE 'c' IMMUTABLE STRICT;

---------------------------------------------------------------
-- TEMPORAL
---------------------------------------------------------------

-- Availability: 2.2.0
CREATE OR REPLACE FUNCTION ST_ClosestPointOfApproach(geometry, geometry)
	RETURNS float8 
	AS '$libdir/postgis-2.2', 'ST_ClosestPointOfApproach' 
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 2.2.0
CREATE OR REPLACE FUNCTION ST_DistanceCPA(geometry, geometry)
	RETURNS float8 
	AS '$libdir/postgis-2.2', 'ST_DistanceCPA'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 2.2.0
CREATE OR REPLACE FUNCTION ST_CPAWithin(geometry, geometry, float8)
	RETURNS bool
	AS '$libdir/postgis-2.2', 'ST_CPAWithin'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 2.2.0
CREATE OR REPLACE FUNCTION ST_IsValidTrajectory(geometry)
	RETURNS bool 
	AS '$libdir/postgis-2.2', 'ST_IsValidTrajectory' 
	LANGUAGE 'c' IMMUTABLE STRICT;
    
---------------------------------------------------------------
-- GEOS
---------------------------------------------------------------

-- PostGIS equivalent function: intersection(geom1 geometry, geom2 geometry)
CREATE OR REPLACE FUNCTION ST_Intersection(geom1 geometry, geom2 geometry)
	RETURNS geometry
	AS '$libdir/postgis-2.2','intersection'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;

-- PostGIS equivalent function: buffer(geometry,float8)
CREATE OR REPLACE FUNCTION ST_Buffer(geometry,float8)
	RETURNS geometry
	AS '$libdir/postgis-2.2','buffer'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;

-- Availability: 1.5.0 - requires GEOS-3.2 or higher
CREATE OR REPLACE FUNCTION _ST_Buffer(geometry,float8,cstring)
	RETURNS geometry
	AS '$libdir/postgis-2.2','buffer'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_Buffer(geometry,float8,integer)
	RETURNS geometry
	AS $$ SELECT _ST_Buffer($1, $2,
		CAST('quad_segs='||CAST($3 AS text) as cstring))
	   $$
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION ST_Buffer(geometry,float8,text)
	RETURNS geometry
	AS $$ SELECT _ST_Buffer($1, $2,
		CAST( regexp_replace($3, '^[0123456789]+$',
			'quad_segs='||$3) AS cstring)
		)
	   $$
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 2.0.0 - requires GEOS-3.2 or higher
CREATE OR REPLACE FUNCTION ST_OffsetCurve(line geometry, distance float8, params text DEFAULT '')
       RETURNS geometry
       AS '$libdir/postgis-2.2','ST_OffsetCurve'
       LANGUAGE 'c' IMMUTABLE STRICT
       COST 100;

-- PostGIS equivalent function: convexhull(geometry)
CREATE OR REPLACE FUNCTION ST_ConvexHull(geometry)
	RETURNS geometry
	AS '$libdir/postgis-2.2','convexhull'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;

-- Only accepts LINESTRING as parameters.
-- Availability: 1.4.0
CREATE OR REPLACE FUNCTION _ST_LineCrossingDirection(geom1 geometry, geom2 geometry)
	RETURNS integer
	AS '$libdir/postgis-2.2', 'ST_LineCrossingDirection'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;

-- Availability: 1.4.0
CREATE OR REPLACE FUNCTION ST_LineCrossingDirection(geom1 geometry, geom2 geometry)
	RETURNS integer AS
	$$ SELECT CASE WHEN NOT $1 && $2 THEN 0 ELSE _ST_LineCrossingDirection($1,$2) END $$
	LANGUAGE 'sql' IMMUTABLE;

-- Requires GEOS >= 3.0.0
-- Availability: 1.3.3
CREATE OR REPLACE FUNCTION ST_SimplifyPreserveTopology(geometry, float8)
	RETURNS geometry
	AS '$libdir/postgis-2.2','topologypreservesimplify'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;

-- Requires GEOS >= 3.1.0
-- Availability: 1.4.0
CREATE OR REPLACE FUNCTION ST_IsValidReason(geometry)
	RETURNS text
	AS '$libdir/postgis-2.2', 'isvalidreason'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;

-- Availability: 2.0.0
CREATE TYPE valid_detail AS (
	valid bool,
	reason varchar,
	location geometry
);

-- Requires GEOS >= 3.3.0
-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION ST_IsValidDetail(geometry)
	RETURNS valid_detail
	AS '$libdir/postgis-2.2', 'isvaliddetail'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;

-- Requires GEOS >= 3.3.0
-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION ST_IsValidDetail(geometry, int4)
	RETURNS valid_detail
	AS '$libdir/postgis-2.2', 'isvaliddetail'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;

-- Requires GEOS >= 3.3.0
-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION ST_IsValidReason(geometry, int4)
	RETURNS text
	AS $$
SELECT CASE WHEN valid THEN 'Valid Geometry' ELSE reason END FROM (
	SELECT (ST_isValidDetail($1, $2)).*
) foo
	$$
	LANGUAGE 'sql' IMMUTABLE STRICT
	COST 100;

-- Requires GEOS >= 3.3.0
-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION ST_IsValid(geometry, int4)
	RETURNS boolean
	AS 'SELECT (ST_isValidDetail($1, $2)).valid'
	LANGUAGE 'sql' IMMUTABLE STRICT
	COST 100;


-- Requires GEOS >= 3.2.0
-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION ST_HausdorffDistance(geom1 geometry, geom2 geometry)
	RETURNS FLOAT8
	AS '$libdir/postgis-2.2', 'hausdorffdistance'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;

-- Requires GEOS >= 3.2.0
-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION ST_HausdorffDistance(geom1 geometry, geom2 geometry, float8)
	RETURNS FLOAT8
	AS '$libdir/postgis-2.2', 'hausdorffdistancedensify'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;

-- PostGIS equivalent function: difference(geom1 geometry, geom2 geometry)
CREATE OR REPLACE FUNCTION ST_Difference(geom1 geometry, geom2 geometry)
	RETURNS geometry
	AS '$libdir/postgis-2.2','difference'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- PostGIS equivalent function: boundary(geometry)
CREATE OR REPLACE FUNCTION ST_Boundary(geometry)
	RETURNS geometry
	AS '$libdir/postgis-2.2','boundary'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- PostGIS equivalent function: symdifference(geom1 geometry, geom2 geometry)
CREATE OR REPLACE FUNCTION ST_SymDifference(geom1 geometry, geom2 geometry)
	RETURNS geometry
	AS '$libdir/postgis-2.2','symdifference'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_symmetricdifference(geom1 geometry, geom2 geometry)
	RETURNS geometry
	AS '$libdir/postgis-2.2','symdifference'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- PostGIS equivalent function: GeomUnion(geom1 geometry, geom2 geometry)
CREATE OR REPLACE FUNCTION ST_Union(geom1 geometry, geom2 geometry)
	RETURNS geometry
	AS '$libdir/postgis-2.2','geomunion'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 2.0.0
-- Requires: GEOS-3.3.0
CREATE OR REPLACE FUNCTION ST_UnaryUnion(geometry)
	RETURNS geometry
	AS '$libdir/postgis-2.2','ST_UnaryUnion'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- ST_RemoveRepeatedPoints(in geometry)
--
-- Removes duplicate vertices in input.
-- Only checks consecutive points for lineal and polygonal geoms.
-- Checks all points for multipoint geoms.
--
-- Availability: 2.2.0
CREATE OR REPLACE FUNCTION ST_RemoveRepeatedPoints(geom geometry, tolerance float8 default 0.0)
       RETURNS geometry
       AS '$libdir/postgis-2.2', 'ST_RemoveRepeatedPoints'
       LANGUAGE 'c' IMMUTABLE STRICT
       COST 100;

-- Requires GEOS >= 3.5.0
-- Availability: 2.2.0
CREATE OR REPLACE FUNCTION ST_ClipByBox2d(geom geometry, box box2d)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'ST_ClipByBox2d'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 50;

-- Requires GEOS >= 3.5.0
-- Availability: 2.2.0
CREATE OR REPLACE FUNCTION ST_Subdivide(geom geometry, maxvertices integer DEFAULT 256)
	RETURNS setof geometry
	AS '$libdir/postgis-2.2', 'ST_Subdivide'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;


--------------------------------------------------------------------------------
-- ST_CleanGeometry / ST_MakeValid
--------------------------------------------------------------------------------

-- ST_MakeValid(in geometry)
--
-- Try to make the input valid maintaining the boundary profile.
-- May return a collection.
-- May return a geometry with inferior dimensions (dimensional collapses).
-- May return NULL if can't handle input.
--
-- Requires: GEOS-3.3.0
-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION ST_MakeValid(geometry)
       RETURNS geometry
       AS '$libdir/postgis-2.2', 'ST_MakeValid'
       LANGUAGE 'c' IMMUTABLE STRICT
       COST 100;

-- ST_CleanGeometry(in geometry)
--
-- Make input:
-- 	- Simple (lineal components)
--	- Valid (polygonal components)
--	- Obeying the RHR (if polygonal)
--	- Simplified of consecutive duplicated points 
-- Ensuring:
--	- No input vertexes are discarded (except consecutive repeated ones)
--	- Output geometry type matches input
--
-- Returns NULL on failure.
-- 
-- Requires: GEOS-3.3.0
-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION ST_CleanGeometry(geometry)
       RETURNS geometry
       AS '$libdir/postgis-2.2', 'ST_CleanGeometry'
       LANGUAGE 'c' IMMUTABLE STRICT
       COST 100;

--------------------------------------------------------------------------------
-- ST_Split
--------------------------------------------------------------------------------

-- ST_Split(in geometry, blade geometry)
--
-- Split a geometry in parts after cutting it with given blade.
-- Returns a collection containing all parts.
--
-- Note that multi-part geometries will be returned exploded,
-- no matter relation to blade.
-- 
-- Availability: 2.0.0
--
CREATE OR REPLACE FUNCTION ST_Split(geom1 geometry, geom2 geometry)
       RETURNS geometry
       AS '$libdir/postgis-2.2', 'ST_Split'
       LANGUAGE 'c' IMMUTABLE STRICT
       COST 100;

--------------------------------------------------------------------------------
-- ST_SharedPaths
--------------------------------------------------------------------------------

-- ST_SharedPaths(lineal1 geometry, lineal1 geometry)
--
-- Returns a collection containing paths shared by the two
-- input geometries. Those going in the same direction are
-- in the first element of the collection, those going in the
-- opposite direction are in the second element.
--
-- The paths themselves are given in the direction of the
-- first geometry.
-- 
-- Availability: 2.0.0
-- Requires GEOS >= 3.3.0
--
CREATE OR REPLACE FUNCTION ST_SharedPaths(geom1 geometry, geom2 geometry)
       RETURNS geometry
       AS '$libdir/postgis-2.2', 'ST_SharedPaths'
       LANGUAGE 'c' IMMUTABLE STRICT
       COST 100;

--------------------------------------------------------------------------------
-- ST_Snap
--------------------------------------------------------------------------------

-- ST_Snap(g1 geometry, g2 geometry, tolerance float8)
--
-- Snap first geometry against second.
--
-- Availability: 2.0.0
-- Requires GEOS >= 3.3.0
--
CREATE OR REPLACE FUNCTION ST_Snap(geom1 geometry, geom2 geometry, float8)
       RETURNS geometry
       AS '$libdir/postgis-2.2', 'ST_Snap'
       LANGUAGE 'c' IMMUTABLE STRICT
       COST 100;

--------------------------------------------------------------------------------
-- ST_RelateMatch
--------------------------------------------------------------------------------

-- ST_RelateMatch(matrix text, pattern text)
--
-- Returns true if pattern 'pattern' matches DE9 intersection matrix 'matrix'
--
-- Availability: 2.0.0
-- Requires GEOS >= 3.3.0
--
CREATE OR REPLACE FUNCTION ST_RelateMatch(text, text)
       RETURNS bool
       AS '$libdir/postgis-2.2', 'ST_RelateMatch'
       LANGUAGE 'c' IMMUTABLE STRICT
       COST 100;

--------------------------------------------------------------------------------
-- ST_Node
--------------------------------------------------------------------------------

-- ST_Node(in geometry)
--
-- Fully node lines in input using the least set of nodes while
-- preserving each of the input ones.
-- Returns a linestring or a multilinestring containing all parts.
--
-- Availability: 2.0.0
-- Requires GEOS >= 3.3.0
--
CREATE OR REPLACE FUNCTION ST_Node(g geometry)
       RETURNS geometry
       AS '$libdir/postgis-2.2', 'ST_Node'
       LANGUAGE 'c' IMMUTABLE STRICT
       COST 100;

--------------------------------------------------------------------------------
-- ST_DelaunayTriangles
--------------------------------------------------------------------------------

-- ST_DelaunayTriangles(g1 geometry, tolerance float8, flags int4)
--
-- Builds Delaunay triangulation out of geometry vertices.
--
-- Returns a collection of triangular polygons with flags=0
-- or a multilinestring with flags=1
--
-- If a tolerance is given it will be used to snap the input points
-- each-other.
-- 
--
-- Availability: 2.1.0
-- Requires GEOS >= 3.4.0
--
CREATE OR REPLACE FUNCTION ST_DelaunayTriangles(g1 geometry, tolerance float8 DEFAULT 0.0, flags int4 DEFAULT 0)
       RETURNS geometry
       AS '$libdir/postgis-2.2', 'ST_DelaunayTriangles'
       LANGUAGE 'c' IMMUTABLE STRICT
       COST 100;


--------------------------------------------------------------------------------
-- Aggregates and their supporting functions
--------------------------------------------------------------------------------

------------------------------------------------------------------------

-- Availability: 2.2.0
CREATE OR REPLACE FUNCTION ST_CombineBBox(box3d,geometry)
	RETURNS box3d
	AS '$libdir/postgis-2.2', 'BOX3D_combine'
	LANGUAGE 'c' IMMUTABLE;

-- Availability: 1.2.2
-- Deprecation in 2.2.0
CREATE OR REPLACE FUNCTION ST_Combine_BBox(box3d,geometry)
	RETURNS box3d AS
  $$ SELECT _postgis_deprecate('ST_Combine_BBox', 'ST_CombineBbox', '2.2.0');
    SELECT ST_CombineBbox($1,$2);
  $$
	LANGUAGE 'sql' IMMUTABLE;

-- Availability: 2.2.0
CREATE OR REPLACE FUNCTION ST_CombineBbox(box2d,geometry)
	RETURNS box2d
	AS '$libdir/postgis-2.2', 'BOX2D_combine'
	LANGUAGE 'c' IMMUTABLE;

-- Availability: 1.2.2
-- Deprecation in 2.2.0
CREATE OR REPLACE FUNCTION ST_Combine_BBox(box2d,geometry)
	RETURNS box2d AS
  $$ SELECT _postgis_deprecate('ST_Combine_BBox', 'ST_CombineBbox', '2.2.0');
    SELECT ST_CombineBbox($1,$2);
  $$
	LANGUAGE 'sql' IMMUTABLE;


-- Availability: 1.2.2
CREATE AGGREGATE ST_Extent(
	sfunc = ST_CombineBBox,
	finalfunc = box2d,
	basetype = geometry,
	stype = box3d
	);

-- Availability: 2.0.0
CREATE AGGREGATE ST_3DExtent(
	sfunc = ST_CombineBBox,
	basetype = geometry,
	stype = box3d
	);

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_Collect(geom1 geometry, geom2 geometry)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_collect'
	LANGUAGE 'c' IMMUTABLE;

-- Availability: 1.2.2
CREATE AGGREGATE ST_MemCollect(
	sfunc = ST_collect,
	basetype = geometry,
	stype = geometry
	);

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_Collect(geometry[])
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_collect_garray'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE AGGREGATE ST_MemUnion (
	basetype = geometry,
	sfunc = ST_Union,
	stype = geometry
	);

--
-- pgis_abs
-- Container type to hold the ArrayBuildState pointer as it passes through
-- the geometry array accumulation aggregate.
--
CREATE OR REPLACE FUNCTION pgis_abs_in(cstring)
	RETURNS pgis_abs
	AS '$libdir/postgis-2.2'
	LANGUAGE 'c' IMMUTABLE STRICT;

CREATE OR REPLACE FUNCTION pgis_abs_out(pgis_abs)
	RETURNS cstring
	AS '$libdir/postgis-2.2'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.4.0
CREATE TYPE pgis_abs (
	internallength = 16,
	input = pgis_abs_in,
	output = pgis_abs_out,
	alignment = double
);

-- Availability: 1.4.0
CREATE OR REPLACE FUNCTION pgis_geometry_accum_transfn(pgis_abs, geometry)
	RETURNS pgis_abs
	AS '$libdir/postgis-2.2'
	LANGUAGE 'c';

-- Availability: 2.2
CREATE OR REPLACE FUNCTION pgis_geometry_accum_transfn(pgis_abs, geometry, float8)
	RETURNS pgis_abs
	AS '$libdir/postgis-2.2'
	LANGUAGE 'c';

-- Availability: 1.4.0
CREATE OR REPLACE FUNCTION pgis_geometry_accum_finalfn(pgis_abs)
	RETURNS geometry[]
	AS '$libdir/postgis-2.2'
	LANGUAGE 'c';

-- Availability: 1.4.0
CREATE OR REPLACE FUNCTION pgis_geometry_union_finalfn(pgis_abs)
	RETURNS geometry
	AS '$libdir/postgis-2.2'
	LANGUAGE 'c';

-- Availability: 1.4.0
CREATE OR REPLACE FUNCTION pgis_geometry_collect_finalfn(pgis_abs)
	RETURNS geometry
	AS '$libdir/postgis-2.2'
	LANGUAGE 'c';

-- Availability: 1.4.0
CREATE OR REPLACE FUNCTION pgis_geometry_polygonize_finalfn(pgis_abs)
	RETURNS geometry
	AS '$libdir/postgis-2.2'
	LANGUAGE 'c';

-- Availability: 2.2
CREATE OR REPLACE FUNCTION pgis_geometry_clusterintersecting_finalfn(pgis_abs)
	RETURNS geometry[]
	AS '$libdir/postgis-2.2'
	LANGUAGE 'c';

-- Availability: 2.2
CREATE OR REPLACE FUNCTION pgis_geometry_clusterwithin_finalfn(pgis_abs)
	RETURNS geometry[]
	AS '$libdir/postgis-2.2'
	LANGUAGE 'c';

-- Availability: 1.4.0
CREATE OR REPLACE FUNCTION pgis_geometry_makeline_finalfn(pgis_abs)
	RETURNS geometry
	AS '$libdir/postgis-2.2'
	LANGUAGE 'c';

-- Availability: 1.2.2
CREATE AGGREGATE ST_Accum (
	sfunc = pgis_geometry_accum_transfn,
	basetype = geometry,
	stype = pgis_abs,
	finalfunc = pgis_geometry_accum_finalfn
	);

-- Availability: 1.4.0
CREATE OR REPLACE FUNCTION ST_Union (geometry[])
	RETURNS geometry
	AS '$libdir/postgis-2.2','pgis_union_geometry_array'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE AGGREGATE ST_Union (
	basetype = geometry,
	sfunc = pgis_geometry_accum_transfn,
	stype = pgis_abs,
	finalfunc = pgis_geometry_union_finalfn
	);

-- Availability: 1.2.2
CREATE AGGREGATE ST_Collect (
	BASETYPE = geometry,
	SFUNC = pgis_geometry_accum_transfn,
	STYPE = pgis_abs,
	FINALFUNC = pgis_geometry_collect_finalfn
	);

-- Availability: 2.2
CREATE AGGREGATE ST_ClusterIntersecting (
	BASETYPE = geometry,
	SFUNC = pgis_geometry_accum_transfn,
	STYPE = pgis_abs,
	FINALFUNC = pgis_geometry_clusterintersecting_finalfn
	);

-- Availability: 2.2
CREATE AGGREGATE ST_ClusterWithin (geometry, float8) (
	SFUNC = pgis_geometry_accum_transfn,
	STYPE = pgis_abs,
	FINALFUNC = pgis_geometry_clusterwithin_finalfn
	);

-- Availability: 1.2.2
CREATE AGGREGATE ST_Polygonize (
	BASETYPE = geometry,
	SFUNC = pgis_geometry_accum_transfn,
	STYPE = pgis_abs,
	FINALFUNC = pgis_geometry_polygonize_finalfn
	);

-- Availability: 1.2.2
CREATE AGGREGATE ST_MakeLine (
	BASETYPE = geometry,
	SFUNC = pgis_geometry_accum_transfn,
	STYPE = pgis_abs,
	FINALFUNC = pgis_geometry_makeline_finalfn
	);



--------------------------------------------------------------------------------

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_Relate(geom1 geometry, geom2 geometry)
	RETURNS text
	AS '$libdir/postgis-2.2','relate_full'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 2.0.0
-- Requires GEOS >= 3.3.0
CREATE OR REPLACE FUNCTION ST_Relate(geom1 geometry, geom2 geometry, int4)
	RETURNS text
	AS '$libdir/postgis-2.2','relate_full'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- PostGIS equivalent function: relate(geom1 geometry, geom2 geometry,text)
CREATE OR REPLACE FUNCTION ST_Relate(geom1 geometry, geom2 geometry,text)
	RETURNS boolean
	AS '$libdir/postgis-2.2','relate_pattern'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- PostGIS equivalent function: disjoint(geom1 geometry, geom2 geometry)
CREATE OR REPLACE FUNCTION ST_Disjoint(geom1 geometry, geom2 geometry)
	RETURNS boolean
	AS '$libdir/postgis-2.2','disjoint'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- PostGIS equivalent function: touches(geom1 geometry, geom2 geometry)
CREATE OR REPLACE FUNCTION _ST_Touches(geom1 geometry, geom2 geometry)
	RETURNS boolean
	AS '$libdir/postgis-2.2','touches'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;

-- Availability: 1.2.2
-- Inlines index magic
CREATE OR REPLACE FUNCTION ST_Touches(geom1 geometry, geom2 geometry)
	RETURNS boolean
	AS 'SELECT $1 && $2 AND _ST_Touches($1,$2)'
	LANGUAGE 'sql' IMMUTABLE;

-- Availability: 1.3.4
CREATE OR REPLACE FUNCTION _ST_DWithin(geom1 geometry, geom2 geometry,float8)
	RETURNS boolean
	AS '$libdir/postgis-2.2', 'LWGEOM_dwithin'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_DWithin(geom1 geometry, geom2 geometry, float8)
	RETURNS boolean
	AS 'SELECT $1 && ST_Expand($2,$3) AND $2 && ST_Expand($1,$3) AND _ST_DWithin($1, $2, $3)'
	LANGUAGE 'sql' IMMUTABLE;

-- PostGIS equivalent function: intersects(geom1 geometry, geom2 geometry)
CREATE OR REPLACE FUNCTION _ST_Intersects(geom1 geometry, geom2 geometry)
	RETURNS boolean
	AS '$libdir/postgis-2.2','intersects'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;

-- Availability: 1.2.2
-- Inlines index magic
CREATE OR REPLACE FUNCTION ST_Intersects(geom1 geometry, geom2 geometry)
	RETURNS boolean
	AS 'SELECT $1 && $2 AND _ST_Intersects($1,$2)'
	LANGUAGE 'sql' IMMUTABLE;
	
-- PostGIS equivalent function: crosses(geom1 geometry, geom2 geometry)
CREATE OR REPLACE FUNCTION _ST_Crosses(geom1 geometry, geom2 geometry)
	RETURNS boolean
	AS '$libdir/postgis-2.2','crosses'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;

-- Availability: 1.2.2
-- Inlines index magic
CREATE OR REPLACE FUNCTION ST_Crosses(geom1 geometry, geom2 geometry)
	RETURNS boolean
	AS 'SELECT $1 && $2 AND _ST_Crosses($1,$2)'
	LANGUAGE 'sql' IMMUTABLE;

-- PostGIS equivalent function: contains(geom1 geometry, geom2 geometry)
CREATE OR REPLACE FUNCTION _ST_Contains(geom1 geometry, geom2 geometry)
	RETURNS boolean
	AS '$libdir/postgis-2.2','contains'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;

-- Availability: 1.2.2
-- Inlines index magic
CREATE OR REPLACE FUNCTION ST_Contains(geom1 geometry, geom2 geometry)
	RETURNS boolean
	AS 'SELECT $1 ~ $2 AND _ST_Contains($1,$2)'
	LANGUAGE 'sql' IMMUTABLE;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION _ST_CoveredBy(geom1 geometry, geom2 geometry)
	RETURNS boolean
	AS '$libdir/postgis-2.2', 'coveredby'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_CoveredBy(geom1 geometry, geom2 geometry)
	RETURNS boolean
	AS 'SELECT $1 @ $2 AND _ST_CoveredBy($1,$2)'
	LANGUAGE 'sql' IMMUTABLE;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION _ST_Covers(geom1 geometry, geom2 geometry)
	RETURNS boolean
	AS '$libdir/postgis-2.2', 'covers'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;

-- Availability: 1.2.2
-- Inlines index magic
CREATE OR REPLACE FUNCTION ST_Covers(geom1 geometry, geom2 geometry)
	RETURNS boolean
	AS 'SELECT $1 ~ $2 AND _ST_Covers($1,$2)'
	LANGUAGE 'sql' IMMUTABLE;

-- Availability: 1.4.0
CREATE OR REPLACE FUNCTION _ST_ContainsProperly(geom1 geometry, geom2 geometry)
	RETURNS boolean
	AS '$libdir/postgis-2.2','containsproperly'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;

-- Availability: 1.4.0
-- Inlines index magic
CREATE OR REPLACE FUNCTION ST_ContainsProperly(geom1 geometry, geom2 geometry)
	RETURNS boolean
	AS 'SELECT $1 ~ $2 AND _ST_ContainsProperly($1,$2)'
	LANGUAGE 'sql' IMMUTABLE;

-- PostGIS equivalent function: overlaps(geom1 geometry, geom2 geometry)
CREATE OR REPLACE FUNCTION _ST_Overlaps(geom1 geometry, geom2 geometry)
	RETURNS boolean
	AS '$libdir/postgis-2.2','overlaps'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;

-- PostGIS equivalent function: within(geom1 geometry, geom2 geometry)
CREATE OR REPLACE FUNCTION _ST_Within(geom1 geometry, geom2 geometry)
	RETURNS boolean
	AS 'SELECT _ST_Contains($2,$1)'
	LANGUAGE 'sql' IMMUTABLE;

-- Availability: 1.2.2
-- Inlines index magic
CREATE OR REPLACE FUNCTION ST_Within(geom1 geometry, geom2 geometry)
	RETURNS boolean
	AS 'SELECT $2 ~ $1 AND _ST_Contains($2,$1)'
	LANGUAGE 'sql' IMMUTABLE;

-- Availability: 1.2.2
-- Inlines index magic
CREATE OR REPLACE FUNCTION ST_Overlaps(geom1 geometry, geom2 geometry)
	RETURNS boolean
	AS 'SELECT $1 && $2 AND _ST_Overlaps($1,$2)'
	LANGUAGE 'sql' IMMUTABLE;

-- PostGIS equivalent function: IsValid(geometry)
-- TODO: change null returns to true
CREATE OR REPLACE FUNCTION ST_IsValid(geometry)
	RETURNS boolean
	AS '$libdir/postgis-2.2', 'isvalid'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;

-- PostGIS equivalent function: Centroid(geometry)
CREATE OR REPLACE FUNCTION ST_Centroid(geometry)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'centroid'
	LANGUAGE 'c' IMMUTABLE STRICT;
	
-- PostGIS equivalent function: IsRing(geometry)
CREATE OR REPLACE FUNCTION ST_IsRing(geometry)
	RETURNS boolean
	AS '$libdir/postgis-2.2', 'isring'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- PostGIS equivalent function: PointOnSurface(geometry)
CREATE OR REPLACE FUNCTION ST_PointOnSurface(geometry)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'pointonsurface'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;

-- PostGIS equivalent function: IsSimple(geometry)
CREATE OR REPLACE FUNCTION ST_IsSimple(geometry)
	RETURNS boolean
	AS '$libdir/postgis-2.2', 'issimple'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION ST_IsCollection(geometry)
	RETURNS boolean
	AS '$libdir/postgis-2.2', 'ST_IsCollection'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION _ST_Equals(geom1 geometry, geom2 geometry)
	RETURNS boolean
	AS '$libdir/postgis-2.2','ST_Equals'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;

-- Availability: 1.2.1
CREATE OR REPLACE FUNCTION ST_Equals(geom1 geometry, geom2 geometry)
	RETURNS boolean
	AS 'SELECT $1 ~= $2 AND _ST_Equals($1,$2)'
	LANGUAGE 'sql' IMMUTABLE;

-- Deprecation in 1.2.3 
-- TODO: drop in 2.0.0 ! 
CREATE OR REPLACE FUNCTION Equals(geom1 geometry, geom2 geometry) 
	RETURNS boolean 
	AS '$libdir/postgis-2.2','ST_Equals' 
	LANGUAGE 'c' IMMUTABLE STRICT;

-----------------------------------------------------------------------
-- GML & KML INPUT
-----------------------------------------------------------------------
CREATE OR REPLACE FUNCTION _ST_GeomFromGML(text, int4)
        RETURNS geometry
        AS '$libdir/postgis-2.2','geom_from_gml'
        LANGUAGE 'c' IMMUTABLE;

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION ST_GeomFromGML(text, int4)
        RETURNS geometry
        AS '$libdir/postgis-2.2','geom_from_gml'
        LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION ST_GeomFromGML(text)
        RETURNS geometry
        AS 'SELECT _ST_GeomFromGML($1, 0)'
        LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION ST_GMLToSQL(text)
        RETURNS geometry
        AS 'SELECT _ST_GeomFromGML($1, 0)'
        LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION ST_GMLToSQL(text, int4)
        RETURNS geometry
        AS '$libdir/postgis-2.2','geom_from_gml'
        LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION ST_GeomFromKML(text)
	RETURNS geometry
	AS '$libdir/postgis-2.2','geom_from_kml'
	LANGUAGE 'c' IMMUTABLE STRICT;

-----------------------------------------------------------------------
-- GEOJSON INPUT
-----------------------------------------------------------------------
-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION ST_GeomFromGeoJson(text)
	RETURNS geometry
	AS '$libdir/postgis-2.2','geom_from_geojson'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION postgis_libjson_version()
	RETURNS text
	AS '$libdir/postgis-2.2','postgis_libjson_version'
	LANGUAGE 'c' IMMUTABLE STRICT;

----------------------------------------------------------------------
-- ENCODED POLYLINE INPUT
-----------------------------------------------------------------------
-- Availability: 2.2.0
-- ST_LineFromEncodedPolyline(polyline text, precision int4)
CREATE OR REPLACE FUNCTION ST_LineFromEncodedPolyline(text, int4 DEFAULT 5)
	RETURNS geometry
	AS '$libdir/postgis-2.2','line_from_encoded_polyline'
	LANGUAGE 'c' IMMUTABLE STRICT;

------------------------------------------------------------------------

----------------------------------------------------------------------
-- ENCODED POLYLINE OUTPUT
-----------------------------------------------------------------------
-- Availability: 2.2.0
-- ST_AsEncodedPolyline(geom geometry, precision int4)
CREATE OR REPLACE FUNCTION ST_AsEncodedPolyline(geom geometry, int4 DEFAULT 5)
	RETURNS TEXT
	AS '$libdir/postgis-2.2','LWGEOM_asEncodedPolyline'
	LANGUAGE 'c' IMMUTABLE STRICT;

------------------------------------------------------------------------

-----------------------------------------------------------------------
-- SVG OUTPUT
-----------------------------------------------------------------------
-- Availability: 1.2.2
-- Changed: 2.0.0 changed to use default args and allow calling by named args
CREATE OR REPLACE FUNCTION ST_AsSVG(geom geometry,rel int4 DEFAULT 0,maxdecimaldigits int4 DEFAULT 15)
	RETURNS TEXT
	AS '$libdir/postgis-2.2','LWGEOM_asSVG'
	LANGUAGE 'c' IMMUTABLE STRICT;

-----------------------------------------------------------------------
-- GML OUTPUT
-----------------------------------------------------------------------
-- _ST_AsGML(version, geom, precision, option, prefix, id)
CREATE OR REPLACE FUNCTION _ST_AsGML(int4, geometry, int4, int4, text, text)
	RETURNS TEXT
	AS '$libdir/postgis-2.2','LWGEOM_asGML'
	LANGUAGE 'c' IMMUTABLE;

-- ST_AsGML(version, geom) / precision=15 
-- Availability: 1.3.2
-- ST_AsGML(version, geom, precision)
-- Availability: 1.3.2

-- ST_AsGML (geom, precision, option) / version=2
-- Availability: 1.4.0
-- Changed: 2.0.0 to have default args
CREATE OR REPLACE FUNCTION ST_AsGML(geom geometry, maxdecimaldigits int4 DEFAULT 15, options int4 DEFAULT 0)
	RETURNS TEXT
	AS $$ SELECT _ST_AsGML(2, $1, $2, $3, null, null); $$
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- ST_AsGML(version, geom, precision, option)
-- Availability: 1.4.0
-- ST_AsGML(version, geom, precision, option, prefix)
-- Availability: 2.0.0
-- Changed: 2.0.0 to use default and named args
-- ST_AsGML(version, geom, precision, option, prefix, id)
-- Availability: 2.1.0
CREATE OR REPLACE FUNCTION ST_AsGML(version int4, geom geometry, maxdecimaldigits int4 DEFAULT 15, options int4 DEFAULT 0, nprefix text DEFAULT null, id text DEFAULT null)
	RETURNS TEXT
	AS $$ SELECT _ST_AsGML($1, $2, $3, $4, $5, $6); $$
	LANGUAGE 'sql' IMMUTABLE;

-----------------------------------------------------------------------
-- KML OUTPUT
-----------------------------------------------------------------------
-- _ST_AsKML(version, geom, precision, nprefix)
CREATE OR REPLACE FUNCTION _ST_AsKML(int4,geometry, int4, text)
	RETURNS TEXT
	AS '$libdir/postgis-2.2','LWGEOM_asKML'
	LANGUAGE 'c' IMMUTABLE;

-- Availability: 1.2.2
-- Changed: 2.0.0 to use default args and allow named args
CREATE OR REPLACE FUNCTION ST_AsKML(geom geometry, maxdecimaldigits int4 DEFAULT 15)
	RETURNS TEXT
	AS $$ SELECT _ST_AsKML(2, ST_Transform($1,4326), $2, null); $$
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- ST_AsKML(version, geom, precision, text)
-- Availability: 2.0.0
-- Changed: 2.0.0 allows default args and got rid of other permutations
CREATE OR REPLACE FUNCTION ST_AsKML(version int4, geom geometry, maxdecimaldigits int4 DEFAULT 15, nprefix text DEFAULT null)
	RETURNS TEXT
	AS $$ SELECT _ST_AsKML($1, ST_Transform($2,4326), $3, $4); $$
	LANGUAGE 'sql' IMMUTABLE;


-----------------------------------------------------------------------
-- GEOJSON OUTPUT
-- Availability: 1.3.4
-----------------------------------------------------------------------

-- ST_AsGeoJson(geom, precision, options) / version=1
-- Changed 2.0.0 to use default args and named args
CREATE OR REPLACE FUNCTION ST_AsGeoJson(geom geometry, maxdecimaldigits int4 DEFAULT 15, options int4 DEFAULT 0)
	RETURNS TEXT
	AS '$libdir/postgis-2.2','LWGEOM_asGeoJson'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- _ST_AsGeoJson(version, geom, precision, options)
CREATE OR REPLACE FUNCTION _ST_AsGeoJson(int4, geometry, int4, int4)
	RETURNS TEXT
	AS $$ SELECT ST_AsGeoJson($2::geometry, $3::int4, $4::int4); $$
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- ST_AsGeoJson(version, geom, precision,options)
-- Changed 2.0.0 to use default args and named args
CREATE OR REPLACE FUNCTION ST_AsGeoJson(gj_version int4, geom geometry, maxdecimaldigits int4 DEFAULT 15, options int4 DEFAULT 0)
	RETURNS TEXT
	AS $$ SELECT ST_AsGeoJson($2::geometry, $3::int4, $4::int4); $$
	LANGUAGE 'sql' IMMUTABLE STRICT;

------------------------------------------------------------------------
-- GeoHash (geohash.org)
------------------------------------------------------------------------

-- Availability 1.4.0
-- Changed 2.0.0 to use default args and named args
CREATE OR REPLACE FUNCTION ST_GeoHash(geom geometry, maxchars int4 DEFAULT 0)
	RETURNS TEXT
		AS '$libdir/postgis-2.2', 'ST_GeoHash'
	LANGUAGE 'c' IMMUTABLE STRICT;

-----------------------------------------------------------------------
-- GeoHash input
-- Availability: 2.0.?
-----------------------------------------------------------------------
-- ST_Box2dFromGeoHash(geohash text, precision int4)
CREATE OR REPLACE FUNCTION ST_Box2dFromGeoHash(text, int4 DEFAULT NULL)
	RETURNS box2d
	AS '$libdir/postgis-2.2','box2d_from_geohash'
	LANGUAGE 'c' IMMUTABLE;

-- ST_PointFromGeoHash(geohash text, precision int4)
CREATE OR REPLACE FUNCTION ST_PointFromGeoHash(text, int4 DEFAULT NULL)
	RETURNS geometry
	AS '$libdir/postgis-2.2','point_from_geohash'
	LANGUAGE 'c' IMMUTABLE;

-- ST_GeomFromGeoHash(geohash text, precision int4)
CREATE OR REPLACE FUNCTION ST_GeomFromGeoHash(text, int4 DEFAULT NULL)
	RETURNS geometry
	AS $$ SELECT CAST(ST_Box2dFromGeoHash($1, $2) AS geometry); $$
	LANGUAGE 'sql' IMMUTABLE;

------------------------------------------------------------------------
-- OGC defined
------------------------------------------------------------------------
-- PostGIS equivalent function: NumPoints(geometry)
CREATE OR REPLACE FUNCTION ST_NumPoints(geometry)
	RETURNS int4
	AS '$libdir/postgis-2.2', 'LWGEOM_numpoints_linestring'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- PostGIS equivalent function: NumGeometries(geometry)
CREATE OR REPLACE FUNCTION ST_NumGeometries(geometry)
	RETURNS int4
	AS '$libdir/postgis-2.2', 'LWGEOM_numgeometries_collection'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- PostGIS equivalent function: GeometryN(geometry)
CREATE OR REPLACE FUNCTION ST_GeometryN(geometry,integer)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_geometryn_collection'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- PostGIS equivalent function: Dimension(geometry)
CREATE OR REPLACE FUNCTION ST_Dimension(geometry)
	RETURNS int4
	AS '$libdir/postgis-2.2', 'LWGEOM_dimension'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- PostGIS equivalent function: ExteriorRing(geometry)
CREATE OR REPLACE FUNCTION ST_ExteriorRing(geometry)
	RETURNS geometry
	AS '$libdir/postgis-2.2','LWGEOM_exteriorring_polygon'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- PostGIS equivalent function: NumInteriorRings(geometry)
CREATE OR REPLACE FUNCTION ST_NumInteriorRings(geometry)
	RETURNS integer
	AS '$libdir/postgis-2.2','LWGEOM_numinteriorrings_polygon'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_NumInteriorRing(geometry)
	RETURNS integer
	AS '$libdir/postgis-2.2','LWGEOM_numinteriorrings_polygon'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- PostGIS equivalent function: InteriorRingN(geometry)
CREATE OR REPLACE FUNCTION ST_InteriorRingN(geometry,integer)
	RETURNS geometry
	AS '$libdir/postgis-2.2','LWGEOM_interiorringn_polygon'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Deprecation in 1.2.3 -- this should not be deprecated (2011-01-04 robe)
CREATE OR REPLACE FUNCTION GeometryType(geometry)
	RETURNS text
	AS '$libdir/postgis-2.2', 'LWGEOM_getTYPE'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Not quite equivalent to GeometryType
CREATE OR REPLACE FUNCTION ST_GeometryType(geometry)
	RETURNS text
	AS '$libdir/postgis-2.2', 'geometry_geometrytype'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- PostGIS equivalent function: PointN(geometry,integer)
CREATE OR REPLACE FUNCTION ST_PointN(geometry,integer)
	RETURNS geometry
	AS '$libdir/postgis-2.2','LWGEOM_pointn_linestring'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION ST_NumPatches(geometry)
	RETURNS int4
	AS '
	SELECT CASE WHEN ST_GeometryType($1) = ''ST_PolyhedralSurface''
	THEN ST_NumGeometries($1)
	ELSE NULL END
	'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION ST_PatchN(geometry, integer)
	RETURNS geometry
	AS '
	SELECT CASE WHEN ST_GeometryType($1) = ''ST_PolyhedralSurface''
	THEN ST_GeometryN($1, $2)
	ELSE NULL END
	'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- PostGIS equivalent function of old StartPoint(geometry))
CREATE OR REPLACE FUNCTION ST_StartPoint(geometry)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_startpoint_linestring'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- PostGIS equivalent function of old EndPoint(geometry)
CREATE OR REPLACE FUNCTION ST_EndPoint(geometry)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_endpoint_linestring'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- PostGIS equivalent function: IsClosed(geometry)
CREATE OR REPLACE FUNCTION ST_IsClosed(geometry)
	RETURNS boolean
	AS '$libdir/postgis-2.2', 'LWGEOM_isclosed'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- PostGIS equivalent function: IsEmpty(geometry)
CREATE OR REPLACE FUNCTION ST_IsEmpty(geometry)
	RETURNS boolean
	AS '$libdir/postgis-2.2', 'LWGEOM_isempty'
	LANGUAGE 'c' IMMUTABLE STRICT;

CREATE OR REPLACE FUNCTION ST_SRID(geometry)
	RETURNS int4
	AS '$libdir/postgis-2.2','LWGEOM_get_srid'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_SetSRID(geometry,int4)
	RETURNS geometry
	AS '$libdir/postgis-2.2','LWGEOM_set_srid'
	LANGUAGE 'c' IMMUTABLE STRICT;
	
-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_AsBinary(geometry,text)
	RETURNS bytea
	AS '$libdir/postgis-2.2','LWGEOM_asBinary'
	LANGUAGE 'c' IMMUTABLE STRICT;
	
-- PostGIS equivalent of old function: AsBinary(geometry)
CREATE OR REPLACE FUNCTION ST_AsBinary(geometry)
	RETURNS bytea
	AS '$libdir/postgis-2.2','LWGEOM_asBinary'
	LANGUAGE 'c' IMMUTABLE STRICT;
	
-- PostGIS equivalent function: AsText(geometry)
CREATE OR REPLACE FUNCTION ST_AsText(geometry)
	RETURNS TEXT
	AS '$libdir/postgis-2.2','LWGEOM_asText'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_GeometryFromText(text)
	RETURNS geometry
	AS '$libdir/postgis-2.2','LWGEOM_from_text'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_GeometryFromText(text, int4)
	RETURNS geometry
	AS '$libdir/postgis-2.2','LWGEOM_from_text'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_GeomFromText(text)
	RETURNS geometry
	AS '$libdir/postgis-2.2','LWGEOM_from_text'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- PostGIS equivalent function: ST_GeometryFromText(text, int4)
CREATE OR REPLACE FUNCTION ST_GeomFromText(text, int4)
	RETURNS geometry
	AS '$libdir/postgis-2.2','LWGEOM_from_text'
	LANGUAGE 'c' IMMUTABLE STRICT;
	
-- PostGIS equivalent function: ST_GeometryFromText(text)
-- SQL/MM alias for ST_GeomFromText
CREATE OR REPLACE FUNCTION ST_WKTToSQL(text)
	RETURNS geometry
	AS '$libdir/postgis-2.2','LWGEOM_from_text'
	LANGUAGE 'c' IMMUTABLE STRICT; 

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_PointFromText(text)
	RETURNS geometry
	AS '
	SELECT CASE WHEN geometrytype(ST_GeomFromText($1)) = ''POINT''
	THEN ST_GeomFromText($1)
	ELSE NULL END
	'
	LANGUAGE 'sql' IMMUTABLE STRICT;


-- PostGIS equivalent function: PointFromText(text, int4)
-- TODO: improve this ... by not duplicating constructor time.
CREATE OR REPLACE FUNCTION ST_PointFromText(text, int4)
	RETURNS geometry
	AS '
	SELECT CASE WHEN geometrytype(ST_GeomFromText($1, $2)) = ''POINT''
	THEN ST_GeomFromText($1, $2)
	ELSE NULL END
	'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_LineFromText(text)
	RETURNS geometry
	AS '
	SELECT CASE WHEN geometrytype(ST_GeomFromText($1)) = ''LINESTRING''
	THEN ST_GeomFromText($1)
	ELSE NULL END
	'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- PostGIS equivalent function: LineFromText(text, int4)
CREATE OR REPLACE FUNCTION ST_LineFromText(text, int4)
	RETURNS geometry
	AS '
	SELECT CASE WHEN geometrytype(ST_GeomFromText($1, $2)) = ''LINESTRING''
	THEN ST_GeomFromText($1,$2)
	ELSE NULL END
	'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_PolyFromText(text)
	RETURNS geometry
	AS '
	SELECT CASE WHEN geometrytype(ST_GeomFromText($1)) = ''POLYGON''
	THEN ST_GeomFromText($1)
	ELSE NULL END
	'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- PostGIS equivalent function: ST_PolygonFromText(text, int4)
CREATE OR REPLACE FUNCTION ST_PolyFromText(text, int4)
	RETURNS geometry
	AS '
	SELECT CASE WHEN geometrytype(ST_GeomFromText($1, $2)) = ''POLYGON''
	THEN ST_GeomFromText($1, $2)
	ELSE NULL END
	'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_PolygonFromText(text, int4)
	RETURNS geometry
	AS 'SELECT ST_PolyFromText($1, $2)'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_PolygonFromText(text)
	RETURNS geometry
	AS 'SELECT ST_PolyFromText($1)'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- PostGIS equivalent function: MLineFromText(text, int4)
CREATE OR REPLACE FUNCTION ST_MLineFromText(text, int4)
	RETURNS geometry
	AS '
	SELECT CASE
	WHEN geometrytype(ST_GeomFromText($1, $2)) = ''MULTILINESTRING''
	THEN ST_GeomFromText($1,$2)
	ELSE NULL END
	'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_MLineFromText(text)
	RETURNS geometry
	AS '
	SELECT CASE WHEN geometrytype(ST_GeomFromText($1)) = ''MULTILINESTRING''
	THEN ST_GeomFromText($1)
	ELSE NULL END
	'
	LANGUAGE 'sql' IMMUTABLE STRICT;


-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_MultiLineStringFromText(text)
	RETURNS geometry
	AS 'SELECT ST_MLineFromText($1)'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_MultiLineStringFromText(text, int4)
	RETURNS geometry
	AS 'SELECT ST_MLineFromText($1, $2)'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- PostGIS equivalent function: MPointFromText(text, int4)
CREATE OR REPLACE FUNCTION ST_MPointFromText(text, int4)
	RETURNS geometry
	AS '
	SELECT CASE WHEN geometrytype(ST_GeomFromText($1, $2)) = ''MULTIPOINT''
	THEN ST_GeomFromText($1, $2)
	ELSE NULL END
	'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_MPointFromText(text)
	RETURNS geometry
	AS '
	SELECT CASE WHEN geometrytype(ST_GeomFromText($1)) = ''MULTIPOINT''
	THEN ST_GeomFromText($1)
	ELSE NULL END
	'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_MultiPointFromText(text)
	RETURNS geometry
	AS 'SELECT ST_MPointFromText($1)'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- PostGIS equivalent function: MPolyFromText(text, int4)
CREATE OR REPLACE FUNCTION ST_MPolyFromText(text, int4)
	RETURNS geometry
	AS '
	SELECT CASE WHEN geometrytype(ST_GeomFromText($1, $2)) = ''MULTIPOLYGON''
	THEN ST_GeomFromText($1,$2)
	ELSE NULL END
	'
	LANGUAGE 'sql' IMMUTABLE STRICT;

--Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_MPolyFromText(text)
	RETURNS geometry
	AS '
	SELECT CASE WHEN geometrytype(ST_GeomFromText($1)) = ''MULTIPOLYGON''
	THEN ST_GeomFromText($1)
	ELSE NULL END
	'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_MultiPolygonFromText(text, int4)
	RETURNS geometry
	AS 'SELECT ST_MPolyFromText($1, $2)'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_MultiPolygonFromText(text)
	RETURNS geometry
	AS 'SELECT ST_MPolyFromText($1)'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_GeomCollFromText(text, int4)
	RETURNS geometry
	AS '
	SELECT CASE
	WHEN geometrytype(ST_GeomFromText($1, $2)) = ''GEOMETRYCOLLECTION''
	THEN ST_GeomFromText($1,$2)
	ELSE NULL END
	'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_GeomCollFromText(text)
	RETURNS geometry
	AS '
	SELECT CASE
	WHEN geometrytype(ST_GeomFromText($1)) = ''GEOMETRYCOLLECTION''
	THEN ST_GeomFromText($1)
	ELSE NULL END
	'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_GeomFromWKB(bytea)
	RETURNS geometry
	AS '$libdir/postgis-2.2','LWGEOM_from_WKB'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- PostGIS equivalent function: GeomFromWKB(bytea, int)
CREATE OR REPLACE FUNCTION ST_GeomFromWKB(bytea, int)
	RETURNS geometry
	AS 'SELECT ST_SetSRID(ST_GeomFromWKB($1), $2)'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- PostGIS equivalent function: PointFromWKB(bytea, int)
CREATE OR REPLACE FUNCTION ST_PointFromWKB(bytea, int)
	RETURNS geometry
	AS '
	SELECT CASE WHEN geometrytype(ST_GeomFromWKB($1, $2)) = ''POINT''
	THEN ST_GeomFromWKB($1, $2)
	ELSE NULL END
	'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_PointFromWKB(bytea)
	RETURNS geometry
	AS '
	SELECT CASE WHEN geometrytype(ST_GeomFromWKB($1)) = ''POINT''
	THEN ST_GeomFromWKB($1)
	ELSE NULL END
	'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- PostGIS equivalent function: LineFromWKB(bytea, int)
CREATE OR REPLACE FUNCTION ST_LineFromWKB(bytea, int)
	RETURNS geometry
	AS '
	SELECT CASE WHEN geometrytype(ST_GeomFromWKB($1, $2)) = ''LINESTRING''
	THEN ST_GeomFromWKB($1, $2)
	ELSE NULL END
	'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_LineFromWKB(bytea)
	RETURNS geometry
	AS '
	SELECT CASE WHEN geometrytype(ST_GeomFromWKB($1)) = ''LINESTRING''
	THEN ST_GeomFromWKB($1)
	ELSE NULL END
	'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_LinestringFromWKB(bytea, int)
	RETURNS geometry
	AS '
	SELECT CASE WHEN geometrytype(ST_GeomFromWKB($1, $2)) = ''LINESTRING''
	THEN ST_GeomFromWKB($1, $2)
	ELSE NULL END
	'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_LinestringFromWKB(bytea)
	RETURNS geometry
	AS '
	SELECT CASE WHEN geometrytype(ST_GeomFromWKB($1)) = ''LINESTRING''
	THEN ST_GeomFromWKB($1)
	ELSE NULL END
	'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- PostGIS equivalent function: PolyFromWKB(text, int)
CREATE OR REPLACE FUNCTION ST_PolyFromWKB(bytea, int)
	RETURNS geometry
	AS '
	SELECT CASE WHEN geometrytype(ST_GeomFromWKB($1, $2)) = ''POLYGON''
	THEN ST_GeomFromWKB($1, $2)
	ELSE NULL END
	'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_PolyFromWKB(bytea)
	RETURNS geometry
	AS '
	SELECT CASE WHEN geometrytype(ST_GeomFromWKB($1)) = ''POLYGON''
	THEN ST_GeomFromWKB($1)
	ELSE NULL END
	'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_PolygonFromWKB(bytea, int)
	RETURNS geometry
	AS '
	SELECT CASE WHEN geometrytype(ST_GeomFromWKB($1,$2)) = ''POLYGON''
	THEN ST_GeomFromWKB($1, $2)
	ELSE NULL END
	'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_PolygonFromWKB(bytea)
	RETURNS geometry
	AS '
	SELECT CASE WHEN geometrytype(ST_GeomFromWKB($1)) = ''POLYGON''
	THEN ST_GeomFromWKB($1)
	ELSE NULL END
	'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- PostGIS equivalent function: MPointFromWKB(text, int)
CREATE OR REPLACE FUNCTION ST_MPointFromWKB(bytea, int)
	RETURNS geometry
	AS '
	SELECT CASE WHEN geometrytype(ST_GeomFromWKB($1, $2)) = ''MULTIPOINT''
	THEN ST_GeomFromWKB($1, $2)
	ELSE NULL END
	'
	LANGUAGE 'sql' IMMUTABLE STRICT;


-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_MPointFromWKB(bytea)
	RETURNS geometry
	AS '
	SELECT CASE WHEN geometrytype(ST_GeomFromWKB($1)) = ''MULTIPOINT''
	THEN ST_GeomFromWKB($1)
	ELSE NULL END
	'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_MultiPointFromWKB(bytea, int)
	RETURNS geometry
	AS '
	SELECT CASE WHEN geometrytype(ST_GeomFromWKB($1,$2)) = ''MULTIPOINT''
	THEN ST_GeomFromWKB($1, $2)
	ELSE NULL END
	'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_MultiPointFromWKB(bytea)
	RETURNS geometry
	AS '
	SELECT CASE WHEN geometrytype(ST_GeomFromWKB($1)) = ''MULTIPOINT''
	THEN ST_GeomFromWKB($1)
	ELSE NULL END
	'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_MultiLineFromWKB(bytea)
	RETURNS geometry
	AS '
	SELECT CASE WHEN geometrytype(ST_GeomFromWKB($1)) = ''MULTILINESTRING''
	THEN ST_GeomFromWKB($1)
	ELSE NULL END
	'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- PostGIS equivalent function: MLineFromWKB(text, int)
CREATE OR REPLACE FUNCTION ST_MLineFromWKB(bytea, int)
	RETURNS geometry
	AS '
	SELECT CASE WHEN geometrytype(ST_GeomFromWKB($1, $2)) = ''MULTILINESTRING''
	THEN ST_GeomFromWKB($1, $2)
	ELSE NULL END
	'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_MLineFromWKB(bytea)
	RETURNS geometry
	AS '
	SELECT CASE WHEN geometrytype(ST_GeomFromWKB($1)) = ''MULTILINESTRING''
	THEN ST_GeomFromWKB($1)
	ELSE NULL END
	'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 1.2.2
-- PostGIS equivalent function: MPolyFromWKB(bytea, int)
CREATE OR REPLACE FUNCTION ST_MPolyFromWKB(bytea, int)
	RETURNS geometry
	AS '
	SELECT CASE WHEN geometrytype(ST_GeomFromWKB($1, $2)) = ''MULTIPOLYGON''
	THEN ST_GeomFromWKB($1, $2)
	ELSE NULL END
	'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_MPolyFromWKB(bytea)
	RETURNS geometry
	AS '
	SELECT CASE WHEN geometrytype(ST_GeomFromWKB($1)) = ''MULTIPOLYGON''
	THEN ST_GeomFromWKB($1)
	ELSE NULL END
	'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_MultiPolyFromWKB(bytea, int)
	RETURNS geometry
	AS '
	SELECT CASE WHEN geometrytype(ST_GeomFromWKB($1, $2)) = ''MULTIPOLYGON''
	THEN ST_GeomFromWKB($1, $2)
	ELSE NULL END
	'
	LANGUAGE 'sql' IMMUTABLE STRICT;


-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_MultiPolyFromWKB(bytea)
	RETURNS geometry
	AS '
	SELECT CASE WHEN geometrytype(ST_GeomFromWKB($1)) = ''MULTIPOLYGON''
	THEN ST_GeomFromWKB($1)
	ELSE NULL END
	'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_GeomCollFromWKB(bytea, int)
	RETURNS geometry
	AS '
	SELECT CASE
	WHEN geometrytype(ST_GeomFromWKB($1, $2)) = ''GEOMETRYCOLLECTION''
	THEN ST_GeomFromWKB($1, $2)
	ELSE NULL END
	'
	LANGUAGE 'sql' IMMUTABLE STRICT;


-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_GeomCollFromWKB(bytea)
	RETURNS geometry
	AS '
	SELECT CASE
	WHEN geometrytype(ST_GeomFromWKB($1)) = ''GEOMETRYCOLLECTION''
	THEN ST_GeomFromWKB($1)
	ELSE NULL END
	'
	LANGUAGE 'sql' IMMUTABLE STRICT;

--New functions

-- Maximum distance between linestrings.

-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION _ST_MaxDistance(geom1 geometry, geom2 geometry)
	RETURNS float8
	AS '$libdir/postgis-2.2', 'LWGEOM_maxdistance2d_linestring'
	LANGUAGE 'c' IMMUTABLE STRICT; 
	
-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION ST_MaxDistance(geom1 geometry, geom2 geometry)
	RETURNS float8
	AS 'SELECT _ST_MaxDistance(ST_ConvexHull($1), ST_ConvexHull($2))'
	LANGUAGE 'sql' IMMUTABLE STRICT; 

CREATE OR REPLACE FUNCTION ST_ClosestPoint(geom1 geometry, geom2 geometry)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_closestpoint'
	LANGUAGE 'c' IMMUTABLE STRICT;

CREATE OR REPLACE FUNCTION ST_ShortestLine(geom1 geometry, geom2 geometry)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_shortestline2d'
	LANGUAGE 'c' IMMUTABLE STRICT;

CREATE OR REPLACE FUNCTION _ST_LongestLine(geom1 geometry, geom2 geometry)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_longestline2d'
	LANGUAGE 'c' IMMUTABLE STRICT;

CREATE OR REPLACE FUNCTION ST_LongestLine(geom1 geometry, geom2 geometry)
	RETURNS geometry
	AS 'SELECT _ST_LongestLine(ST_ConvexHull($1), ST_ConvexHull($2))'
	LANGUAGE 'sql' IMMUTABLE STRICT; 

CREATE OR REPLACE FUNCTION _ST_DFullyWithin(geom1 geometry, geom2 geometry,float8)
	RETURNS boolean
	AS '$libdir/postgis-2.2', 'LWGEOM_dfullywithin'
	LANGUAGE 'c' IMMUTABLE STRICT; 

CREATE OR REPLACE FUNCTION ST_DFullyWithin(geom1 geometry, geom2 geometry, float8)
	RETURNS boolean
	AS 'SELECT $1 && ST_Expand($2,$3) AND $2 && ST_Expand($1,$3) AND _ST_DFullyWithin(ST_ConvexHull($1), ST_ConvexHull($2), $3)'
	LANGUAGE 'sql' IMMUTABLE; 
	
-- Availability: 2.2.0
CREATE OR REPLACE FUNCTION ST_SwapOrdinates(geom geometry, ords cstring)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'ST_SwapOrdinates'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- NOTE: same as ST_SwapOrdinates(geometry, 'xy')
--       but slightly faster in that it doesn't need to parse ordinate
--       spec strings
CREATE OR REPLACE FUNCTION ST_FlipCoordinates(geometry)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'ST_FlipCoordinates'
	LANGUAGE 'c' IMMUTABLE STRICT; 

--
-- SFSQL 1.1
--
-- BdPolyFromText(multiLineStringTaggedText String, SRID Integer): Polygon
--
--  Construct a Polygon given an arbitrary
--  collection of closed linestrings as a
--  MultiLineString text representation.
--
-- This is a PLPGSQL function rather then an SQL function
-- To avoid double call of BuildArea (one to get GeometryType
-- and another to actual return, in a CASE WHEN construct).
-- Also, we profit from plpgsql to RAISE exceptions.
--

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_BdPolyFromText(text, integer)
RETURNS geometry
AS $$
DECLARE
	geomtext alias for $1;
	srid alias for $2;
	mline geometry;
	geom geometry;
BEGIN
	mline := ST_MultiLineStringFromText(geomtext, srid);

	IF mline IS NULL
	THEN
		RAISE EXCEPTION 'Input is not a MultiLinestring';
	END IF;

	geom := ST_BuildArea(mline);

	IF GeometryType(geom) != 'POLYGON'
	THEN
		RAISE EXCEPTION 'Input returns more then a single polygon, try using BdMPolyFromText instead';
	END IF;

	RETURN geom;
END;
$$
LANGUAGE 'plpgsql' IMMUTABLE STRICT;

--
-- SFSQL 1.1
--
-- BdMPolyFromText(multiLineStringTaggedText String, SRID Integer): MultiPolygon
--
--  Construct a MultiPolygon given an arbitrary
--  collection of closed linestrings as a
--  MultiLineString text representation.
--
-- This is a PLPGSQL function rather then an SQL function
-- To raise an exception in case of invalid input.
--

-- Availability: 1.2.2
CREATE OR REPLACE FUNCTION ST_BdMPolyFromText(text, integer)
RETURNS geometry
AS $$
DECLARE
	geomtext alias for $1;
	srid alias for $2;
	mline geometry;
	geom geometry;
BEGIN
	mline := ST_MultiLineStringFromText(geomtext, srid);

	IF mline IS NULL
	THEN
		RAISE EXCEPTION 'Input is not a MultiLinestring';
	END IF;

	geom := ST_Multi(ST_BuildArea(mline));

	RETURN geom;
END;
$$
LANGUAGE 'plpgsql' IMMUTABLE STRICT;


-- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
-- 
--
-- PostGIS - Spatial Types for PostgreSQL
-- http://postgis.net
-- Copyright 2001-2003 Refractions Research Inc.
--
-- This is free software; you can redistribute and/or modify it under
-- the terms of the GNU General Public Licence. See the COPYING file.
--  
-- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -




-----------------------------------------------------------------------
-- LONG TERM LOCKING
-----------------------------------------------------------------------

-- UnlockRows(authid)
-- removes all locks held by the given auth
-- returns the number of locks released
CREATE OR REPLACE FUNCTION UnlockRows(text)
	RETURNS int
	AS $$ 
DECLARE
	ret int;
BEGIN

	IF NOT LongTransactionsEnabled() THEN
		RAISE EXCEPTION 'Long transaction support disabled, use EnableLongTransaction() to enable.';
	END IF;

	EXECUTE 'DELETE FROM authorization_table where authid = ' ||
		quote_literal($1);

	GET DIAGNOSTICS ret = ROW_COUNT;

	RETURN ret;
END;
$$
LANGUAGE 'plpgsql'  VOLATILE STRICT;

-- LockRow([schema], table, rowid, auth, [expires]) 
-- Returns 1 if successfully obtained the lock, 0 otherwise
CREATE OR REPLACE FUNCTION LockRow(text, text, text, text, timestamp)
	RETURNS int
	AS $$ 
DECLARE
	myschema alias for $1;
	mytable alias for $2;
	myrid   alias for $3;
	authid alias for $4;
	expires alias for $5;
	ret int;
	mytoid oid;
	myrec RECORD;
	
BEGIN

	IF NOT LongTransactionsEnabled() THEN
		RAISE EXCEPTION 'Long transaction support disabled, use EnableLongTransaction() to enable.';
	END IF;

	EXECUTE 'DELETE FROM authorization_table WHERE expires < now()'; 

	SELECT c.oid INTO mytoid FROM pg_class c, pg_namespace n
		WHERE c.relname = mytable
		AND c.relnamespace = n.oid
		AND n.nspname = myschema;

	-- RAISE NOTICE 'toid: %', mytoid;

	FOR myrec IN SELECT * FROM authorization_table WHERE 
		toid = mytoid AND rid = myrid
	LOOP
		IF myrec.authid != authid THEN
			RETURN 0;
		ELSE
			RETURN 1;
		END IF;
	END LOOP;

	EXECUTE 'INSERT INTO authorization_table VALUES ('||
		quote_literal(mytoid::text)||','||quote_literal(myrid)||
		','||quote_literal(expires::text)||
		','||quote_literal(authid) ||')';

	GET DIAGNOSTICS ret = ROW_COUNT;

	RETURN ret;
END;
$$
LANGUAGE 'plpgsql'  VOLATILE STRICT;

-- LockRow(schema, table, rid, authid);
CREATE OR REPLACE FUNCTION LockRow(text, text, text, text)
	RETURNS int
	AS
$$ SELECT LockRow($1, $2, $3, $4, now()::timestamp+'1:00'); $$
	LANGUAGE 'sql'  VOLATILE STRICT;

-- LockRow(table, rid, authid);
CREATE OR REPLACE FUNCTION LockRow(text, text, text)
	RETURNS int
	AS
$$ SELECT LockRow(current_schema(), $1, $2, $3, now()::timestamp+'1:00'); $$
	LANGUAGE 'sql'  VOLATILE STRICT;

-- LockRow(schema, table, rid, expires);
CREATE OR REPLACE FUNCTION LockRow(text, text, text, timestamp)
	RETURNS int
	AS
$$ SELECT LockRow(current_schema(), $1, $2, $3, $4); $$
	LANGUAGE 'sql'  VOLATILE STRICT;


CREATE OR REPLACE FUNCTION AddAuth(text)
	RETURNS BOOLEAN
	AS $$ 
DECLARE
	lockid alias for $1;
	okay boolean;
	myrec record;
BEGIN
	-- check to see if table exists
	--  if not, CREATE TEMP TABLE mylock (transid xid, lockcode text)
	okay := 'f';
	FOR myrec IN SELECT * FROM pg_class WHERE relname = 'temp_lock_have_table' LOOP
		okay := 't';
	END LOOP; 
	IF (okay <> 't') THEN 
		CREATE TEMP TABLE temp_lock_have_table (transid xid, lockcode text);
			-- this will only work from pgsql7.4 up
			-- ON COMMIT DELETE ROWS;
	END IF;

	--  INSERT INTO mylock VALUES ( $1)
--	EXECUTE 'INSERT INTO temp_lock_have_table VALUES ( '||
--		quote_literal(getTransactionID()) || ',' ||
--		quote_literal(lockid) ||')';

	INSERT INTO temp_lock_have_table VALUES (getTransactionID(), lockid);

	RETURN true::boolean;
END;
$$
LANGUAGE PLPGSQL;
 

-- CheckAuth( <schema>, <table>, <ridcolumn> )
--
-- Returns 0
--
CREATE OR REPLACE FUNCTION CheckAuth(text, text, text)
	RETURNS INT
	AS $$ 
DECLARE
	schema text;
BEGIN
	IF NOT LongTransactionsEnabled() THEN
		RAISE EXCEPTION 'Long transaction support disabled, use EnableLongTransaction() to enable.';
	END IF;

	if ( $1 != '' ) THEN
		schema = $1;
	ELSE
		SELECT current_schema() into schema;
	END IF;

	-- TODO: check for an already existing trigger ?

	EXECUTE 'CREATE TRIGGER check_auth BEFORE UPDATE OR DELETE ON ' 
		|| quote_ident(schema) || '.' || quote_ident($2)
		||' FOR EACH ROW EXECUTE PROCEDURE CheckAuthTrigger('
		|| quote_literal($3) || ')';

	RETURN 0;
END;
$$
LANGUAGE 'plpgsql';

-- CheckAuth(<table>, <ridcolumn>)
CREATE OR REPLACE FUNCTION CheckAuth(text, text)
	RETURNS INT
	AS
	$$ SELECT CheckAuth('', $1, $2) $$
	LANGUAGE 'sql';

CREATE OR REPLACE FUNCTION CheckAuthTrigger()
	RETURNS trigger AS 
	'$libdir/postgis-2.2', 'check_authorization'
	LANGUAGE C;

CREATE OR REPLACE FUNCTION GetTransactionID()
	RETURNS xid AS 
	'$libdir/postgis-2.2', 'getTransactionID'
	LANGUAGE C;


--
-- Enable Long transactions support
--
--  Creates the authorization_table if not already existing
--
CREATE OR REPLACE FUNCTION EnableLongTransactions()
	RETURNS TEXT
	AS $$ 
DECLARE
	"query" text;
	exists bool;
	rec RECORD;

BEGIN

	exists = 'f';
	FOR rec IN SELECT * FROM pg_class WHERE relname = 'authorization_table'
	LOOP
		exists = 't';
	END LOOP;

	IF NOT exists
	THEN
		"query" = 'CREATE TABLE authorization_table (
			toid oid, -- table oid
			rid text, -- row id
			expires timestamp,
			authid text
		)';
		EXECUTE "query";
	END IF;

	exists = 'f';
	FOR rec IN SELECT * FROM pg_class WHERE relname = 'authorized_tables'
	LOOP
		exists = 't';
	END LOOP;

	IF NOT exists THEN
		"query" = 'CREATE VIEW authorized_tables AS ' ||
			'SELECT ' ||
			'n.nspname as schema, ' ||
			'c.relname as table, trim(' ||
			quote_literal(chr(92) || '000') ||
			' from t.tgargs) as id_column ' ||
			'FROM pg_trigger t, pg_class c, pg_proc p ' ||
			', pg_namespace n ' ||
			'WHERE p.proname = ' || quote_literal('checkauthtrigger') ||
			' AND c.relnamespace = n.oid' ||
			' AND t.tgfoid = p.oid and t.tgrelid = c.oid';
		EXECUTE "query";
	END IF;

	RETURN 'Long transactions support enabled';
END;
$$
LANGUAGE 'plpgsql';

--
-- Check if Long transactions support is enabled
--
CREATE OR REPLACE FUNCTION LongTransactionsEnabled()
	RETURNS bool
AS $$ 
DECLARE
	rec RECORD;
BEGIN
	FOR rec IN SELECT oid FROM pg_class WHERE relname = 'authorized_tables'
	LOOP
		return 't';
	END LOOP;
	return 'f';
END;
$$
LANGUAGE 'plpgsql';

--
-- Disable Long transactions support
--
--  (1) Drop any long_xact trigger 
--  (2) Drop the authorization_table
--  (3) KEEP the authorized_tables view
--
CREATE OR REPLACE FUNCTION DisableLongTransactions()
	RETURNS TEXT
	AS $$ 
DECLARE
	rec RECORD;

BEGIN

	--
	-- Drop all triggers applied by CheckAuth()
	--
	FOR rec IN
		SELECT c.relname, t.tgname, t.tgargs FROM pg_trigger t, pg_class c, pg_proc p
		WHERE p.proname = 'checkauthtrigger' and t.tgfoid = p.oid and t.tgrelid = c.oid
	LOOP
		EXECUTE 'DROP TRIGGER ' || quote_ident(rec.tgname) ||
			' ON ' || quote_ident(rec.relname);
	END LOOP;

	--
	-- Drop the authorization_table table
	--
	FOR rec IN SELECT * FROM pg_class WHERE relname = 'authorization_table' LOOP
		DROP TABLE authorization_table;
	END LOOP;

	--
	-- Drop the authorized_tables view
	--
	FOR rec IN SELECT * FROM pg_class WHERE relname = 'authorized_tables' LOOP
		DROP VIEW authorized_tables;
	END LOOP;

	RETURN 'Long transactions support disabled';
END;
$$
LANGUAGE 'plpgsql';

---------------------------------------------------------------
-- END
---------------------------------------------------------------

---------------------------------------------------------------------------
--
-- PostGIS - Spatial Types for PostgreSQL
-- Copyright 2009 Paul Ramsey <pramsey@cleverelephant.ca>
--
-- This is free software; you can redistribute and/or modify it under
-- the terms of the GNU General Public Licence. See the COPYING file.
--
---------------------------------------------------------------------------

-----------------------------------------------------------------------------
--  GEOGRAPHY TYPE
-----------------------------------------------------------------------------

-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION geography_typmod_in(cstring[])
	RETURNS integer
	AS '$libdir/postgis-2.2','geography_typmod_in'
	LANGUAGE 'c' IMMUTABLE STRICT; 

-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION geography_typmod_out(integer)
	RETURNS cstring
	AS '$libdir/postgis-2.2','postgis_typmod_out'
	LANGUAGE 'c' IMMUTABLE STRICT; 
	
-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION geography_in(cstring, oid, integer)
	RETURNS geography
	AS '$libdir/postgis-2.2','geography_in'
	LANGUAGE 'c' IMMUTABLE STRICT; 

-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION geography_out(geography)
	RETURNS cstring
	AS '$libdir/postgis-2.2','geography_out'
	LANGUAGE 'c' IMMUTABLE STRICT; 

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION geography_recv(internal, oid, integer)
	RETURNS geography
	AS '$libdir/postgis-2.2','geography_recv'
	LANGUAGE 'c' IMMUTABLE STRICT; 

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION geography_send(geography)
	RETURNS bytea
	AS '$libdir/postgis-2.2','geography_send'
	LANGUAGE 'c' IMMUTABLE STRICT; 

-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION geography_analyze(internal)
	RETURNS bool
	AS '$libdir/postgis-2.2','gserialized_analyze_nd'
	LANGUAGE 'c' VOLATILE STRICT; 

-- Availability: 1.5.0
CREATE TYPE geography (
	internallength = variable,
	input = geography_in,
	output = geography_out,
	receive = geography_recv,
	send = geography_send,
	typmod_in = geography_typmod_in,
	typmod_out = geography_typmod_out,
	delimiter = ':',
	analyze = geography_analyze,
	storage = main,
	alignment = double
);



-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION geography(geography, integer, boolean)
	RETURNS geography
	AS '$libdir/postgis-2.2','geography_enforce_typmod'
	LANGUAGE 'c' IMMUTABLE STRICT; 

-- Availability: 1.5.0
CREATE CAST (geography AS geography) WITH FUNCTION geography(geography, integer, boolean) AS IMPLICIT;

-- Availability: 2.0.0
-- Changed: 2.1.4 ticket #2870 changed to use geography bytea func instead of geometry bytea
CREATE OR REPLACE FUNCTION geography(bytea)
	RETURNS geography
	AS '$libdir/postgis-2.2','geography_from_binary'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION bytea(geography)
	RETURNS bytea
	AS '$libdir/postgis-2.2','LWGEOM_to_bytea'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 2.0.0
CREATE CAST (bytea AS geography) WITH FUNCTION geography(bytea) AS IMPLICIT;
-- Availability: 2.0.0
CREATE CAST (geography AS bytea) WITH FUNCTION bytea(geography) AS IMPLICIT;

-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION ST_AsText(geography)
	RETURNS TEXT
	AS '$libdir/postgis-2.2','LWGEOM_asText'
	LANGUAGE 'c' IMMUTABLE STRICT;
	
-- Availability: 1.5.0 - this is just a hack to prevent unknown from causing ambiguous name because of geography
CREATE OR REPLACE FUNCTION ST_AsText(text)
	RETURNS text AS
	$$ SELECT ST_AsText($1::geometry);  $$
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION ST_GeographyFromText(text)
	RETURNS geography
	AS '$libdir/postgis-2.2','geography_from_text'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION ST_GeogFromText(text)
	RETURNS geography
	AS '$libdir/postgis-2.2','geography_from_text'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION ST_GeogFromWKB(bytea)
	RETURNS geography
	AS '$libdir/postgis-2.2','geography_from_binary'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION postgis_typmod_dims(integer)
	RETURNS integer
	AS '$libdir/postgis-2.2','postgis_typmod_dims'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION postgis_typmod_srid(integer)
	RETURNS integer
	AS '$libdir/postgis-2.2','postgis_typmod_srid'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION postgis_typmod_type(integer)
	RETURNS text
	AS '$libdir/postgis-2.2','postgis_typmod_type'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.5.0
CREATE OR REPLACE VIEW geography_columns AS
	SELECT
		current_database() AS f_table_catalog, 
		n.nspname AS f_table_schema, 
		c.relname AS f_table_name, 
		a.attname AS f_geography_column,
		postgis_typmod_dims(a.atttypmod) AS coord_dimension,
		postgis_typmod_srid(a.atttypmod) AS srid,
		postgis_typmod_type(a.atttypmod) AS type
	FROM 
		pg_class c, 
		pg_attribute a, 
		pg_type t, 
		pg_namespace n
	WHERE t.typname = 'geography'
        AND a.attisdropped = false
        AND a.atttypid = t.oid
        AND a.attrelid = c.oid
        AND c.relnamespace = n.oid
        AND NOT pg_is_other_temp_schema(c.relnamespace)
        AND has_table_privilege( c.oid, 'SELECT'::text );

-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION geography(geometry)
	RETURNS geography
	AS '$libdir/postgis-2.2','geography_from_geometry'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.5.0
CREATE CAST (geometry AS geography) WITH FUNCTION geography(geometry) AS IMPLICIT;

-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION geometry(geography)
	RETURNS geometry
	AS '$libdir/postgis-2.2','geometry_from_geography'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.5.0
CREATE CAST (geography AS geometry) WITH FUNCTION geometry(geography) ;

-- ---------- ---------- ---------- ---------- ---------- ---------- ----------
-- GiST Support Functions
-- ---------- ---------- ---------- ---------- ---------- ---------- ----------

-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION geography_gist_consistent(internal,geography,int4) 
	RETURNS bool 
	AS '$libdir/postgis-2.2' ,'gserialized_gist_consistent'
	LANGUAGE 'c';

-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION geography_gist_compress(internal) 
	RETURNS internal 
	AS '$libdir/postgis-2.2','gserialized_gist_compress'
	LANGUAGE 'c';

-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION geography_gist_penalty(internal,internal,internal) 
	RETURNS internal 
	AS '$libdir/postgis-2.2' ,'gserialized_gist_penalty'
	LANGUAGE 'c';

-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION geography_gist_picksplit(internal, internal) 
	RETURNS internal 
	AS '$libdir/postgis-2.2' ,'gserialized_gist_picksplit'
	LANGUAGE 'c';

-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION geography_gist_union(bytea, internal) 
	RETURNS internal 
	AS '$libdir/postgis-2.2' ,'gserialized_gist_union'
	LANGUAGE 'c';

-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION geography_gist_same(box2d, box2d, internal) 
	RETURNS internal 
	AS '$libdir/postgis-2.2' ,'gserialized_gist_same'
	LANGUAGE 'c';

-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION geography_gist_decompress(internal) 
	RETURNS internal 
	AS '$libdir/postgis-2.2' ,'gserialized_gist_decompress'
	LANGUAGE 'c';

-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION geography_overlaps(geography, geography) 
	RETURNS boolean 
	AS '$libdir/postgis-2.2' ,'gserialized_overlaps'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.5.0
CREATE OPERATOR && (
	LEFTARG = geography, RIGHTARG = geography, PROCEDURE = geography_overlaps,
	COMMUTATOR = '&&',
	RESTRICT = gserialized_gist_sel_nd,
	JOIN = gserialized_gist_joinsel_nd	
);

-- Availability: 2.2.0
CREATE OR REPLACE FUNCTION geography_distance_knn(geography, geography)
  RETURNS float8
  AS '$libdir/postgis-2.2','geography_distance_knn'
  LANGUAGE 'c' IMMUTABLE STRICT
  COST 100;

-- Availability: 2.2.0
CREATE OPERATOR <-> (
  LEFTARG = geography, RIGHTARG = geography, PROCEDURE = geography_distance_knn,
  COMMUTATOR = '<->'
);

-- Availability: 2.2.0
CREATE OR REPLACE FUNCTION geography_gist_distance(internal, geography, int4) 
	RETURNS float8 
	AS '$libdir/postgis-2.2' ,'gserialized_gist_geog_distance'
	LANGUAGE 'c';


-- Availability: 1.5.0
CREATE OPERATOR CLASS gist_geography_ops
	DEFAULT FOR TYPE geography USING GIST AS
	STORAGE 	gidx,
	OPERATOR        3        &&	,
--	OPERATOR        6        ~=	,
--	OPERATOR        7        ~	,
--	OPERATOR        8        @	,
-- Availability: 2.2.0
	OPERATOR        13       <-> FOR ORDER BY pg_catalog.float_ops,
	FUNCTION        8        geography_gist_distance (internal, geography, int4),
	FUNCTION        1        geography_gist_consistent (internal, geography, int4),
	FUNCTION        2        geography_gist_union (bytea, internal),
	FUNCTION        3        geography_gist_compress (internal),
	FUNCTION        4        geography_gist_decompress (internal),
	FUNCTION        5        geography_gist_penalty (internal, internal, internal),
	FUNCTION        6        geography_gist_picksplit (internal, internal),
	FUNCTION        7        geography_gist_same (box2d, box2d, internal);


-- ---------- ---------- ---------- ---------- ---------- ---------- ----------
-- B-Tree Functions
-- For sorting and grouping
-- Availability: 1.5.0
-- ---------- ---------- ---------- ---------- ---------- ---------- ----------
-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION geography_lt(geography, geography)
	RETURNS bool
	AS '$libdir/postgis-2.2', 'geography_lt'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION geography_le(geography, geography)
	RETURNS bool
	AS '$libdir/postgis-2.2', 'geography_le'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION geography_gt(geography, geography)
	RETURNS bool
	AS '$libdir/postgis-2.2', 'geography_gt'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.5.0	
CREATE OR REPLACE FUNCTION geography_ge(geography, geography)
	RETURNS bool
	AS '$libdir/postgis-2.2', 'geography_ge'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.5.0	
CREATE OR REPLACE FUNCTION geography_eq(geography, geography)
	RETURNS bool
	AS '$libdir/postgis-2.2', 'geography_eq'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.5.0	
CREATE OR REPLACE FUNCTION geography_cmp(geography, geography)
	RETURNS integer
	AS '$libdir/postgis-2.2', 'geography_cmp'
	LANGUAGE 'c' IMMUTABLE STRICT;

--
-- Sorting operators for Btree
--
-- Availability: 1.5.0
CREATE OPERATOR < (
	LEFTARG = geography, RIGHTARG = geography, PROCEDURE = geography_lt,
	COMMUTATOR = '>', NEGATOR = '>=',
	RESTRICT = contsel, JOIN = contjoinsel
);

-- Availability: 1.5.0
CREATE OPERATOR <= (
	LEFTARG = geography, RIGHTARG = geography, PROCEDURE = geography_le,
	COMMUTATOR = '>=', NEGATOR = '>',
	RESTRICT = contsel, JOIN = contjoinsel
);

-- Availability: 1.5.0
CREATE OPERATOR = (
	LEFTARG = geography, RIGHTARG = geography, PROCEDURE = geography_eq,
	COMMUTATOR = '=', -- we might implement a faster negator here
	RESTRICT = contsel, JOIN = contjoinsel
);

-- Availability: 1.5.0
CREATE OPERATOR >= (
	LEFTARG = geography, RIGHTARG = geography, PROCEDURE = geography_ge,
	COMMUTATOR = '<=', NEGATOR = '<',
	RESTRICT = contsel, JOIN = contjoinsel
);

-- Availability: 1.5.0
CREATE OPERATOR > (
	LEFTARG = geography, RIGHTARG = geography, PROCEDURE = geography_gt,
	COMMUTATOR = '<', NEGATOR = '<=',
	RESTRICT = contsel, JOIN = contjoinsel
);

-- Availability: 1.5.0
CREATE OPERATOR CLASS btree_geography_ops
	DEFAULT FOR TYPE geography USING btree AS
	OPERATOR	1	< ,
	OPERATOR	2	<= ,
	OPERATOR	3	= ,
	OPERATOR	4	>= ,
	OPERATOR	5	> ,
	FUNCTION	1	geography_cmp (geography, geography);


-- ---------- ---------- ---------- ---------- ---------- ---------- ----------
-- Export Functions
-- Availability: 1.5.0
-- ---------- ---------- ---------- ---------- ---------- ---------- ----------

--
-- SVG OUTPUT
--

-- ST_AsSVG(geography, rel, precision)
-- rel int4 DEFAULT 0, maxdecimaldigits int4 DEFAULT 15
-- Changed 2.0.0 to use default args and named args
CREATE OR REPLACE FUNCTION ST_AsSVG(geog geography,rel int4 DEFAULT 0,maxdecimaldigits int4 DEFAULT 15)
	RETURNS text
	AS '$libdir/postgis-2.2','geography_as_svg'
	LANGUAGE 'c' IMMUTABLE STRICT;
	
-- Availability: 1.5.0 - this is just a hack to prevent unknown from causing ambiguous name because of geography
CREATE OR REPLACE FUNCTION ST_AsSVG(text)
	RETURNS text AS
	$$ SELECT ST_AsSVG($1::geometry,0,15);  $$
	LANGUAGE 'sql' IMMUTABLE STRICT;

--
-- GML OUTPUT
--

-- _ST_AsGML(version, geography, precision, option, prefix, id)
CREATE OR REPLACE FUNCTION _ST_AsGML(int4, geography, int4, int4, text, text)
	RETURNS text
	AS '$libdir/postgis-2.2','geography_as_gml'
	LANGUAGE 'c' IMMUTABLE;

-- Availability: 1.5.0 - this is just a hack to prevent unknown from causing ambiguous name because of geography
-- Change 2.0.0 to use base function
CREATE OR REPLACE FUNCTION ST_AsGML(text)
	RETURNS text AS
	$$ SELECT _ST_AsGML(2,$1::geometry,15,0, NULL, NULL);  $$
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- ST_AsGML (geography, precision, option) / version=2
-- Availability: 1.5.0
-- Changed: 2.0.0 to use default args
CREATE OR REPLACE FUNCTION ST_AsGML(geog geography, maxdecimaldigits int4 DEFAULT 15, options int4 DEFAULT 0)
	RETURNS text
	AS 'SELECT _ST_AsGML(2, $1, $2, $3, null, null)'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- ST_AsGML(version, geography, precision, option, prefix)
-- Changed: 2.0.0 to use default args and allow named args
-- Changed: 2.1.0 enhance to allow id value
-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION ST_AsGML(version int4, geog geography, maxdecimaldigits int4 DEFAULT 15, options int4 DEFAULT 0, nprefix text DEFAULT NULL, id text DEFAULT NULL)
	RETURNS text
	AS $$ SELECT _ST_AsGML($1, $2, $3, $4, $5, $6);$$
	LANGUAGE 'sql' IMMUTABLE;

--
-- KML OUTPUT
--

-- _ST_AsKML(version, geography, precision)
CREATE OR REPLACE FUNCTION _ST_AsKML(int4, geography, int4, text)
	RETURNS text
	AS '$libdir/postgis-2.2','geography_as_kml'
	LANGUAGE 'c' IMMUTABLE;

-- AsKML(geography,precision) / version=2
-- Changed: 2.0.0 to use default args and named args
CREATE OR REPLACE FUNCTION ST_AsKML(geog geography, maxdecimaldigits int4 DEFAULT 15)
	RETURNS text
	AS 'SELECT _ST_AsKML(2, $1, $2, null)'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 1.5.0 - this is just a hack to prevent unknown from causing ambiguous name because of geography
-- Deprecated 2.0.0
CREATE OR REPLACE FUNCTION ST_AsKML(text)
	RETURNS text AS
	$$ SELECT _ST_AsKML(2, $1::geometry, 15, null);  $$
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- ST_AsKML(version, geography, precision, prefix)
-- Availability: 2.0.0 nprefix added
-- Changed: 2.0.0 to use default args and named args
CREATE OR REPLACE FUNCTION ST_AsKML(version int4, geog geography, maxdecimaldigits int4 DEFAULT 15, nprefix text DEFAULT null)
	RETURNS text
	AS 'SELECT _ST_AsKML($1, $2, $3, $4)'
	LANGUAGE 'sql' IMMUTABLE;

--
-- GeoJson Output
--

CREATE OR REPLACE FUNCTION _ST_AsGeoJson(int4, geography, int4, int4)
	RETURNS text
	AS '$libdir/postgis-2.2','geography_as_geojson'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.5.0 - this is just a hack to prevent unknown from causing ambiguous name because of geography
-- Deprecated in 2.0.0
CREATE OR REPLACE FUNCTION ST_AsGeoJson(text)
	RETURNS text AS
	$$ SELECT _ST_AsGeoJson(1, $1::geometry,15,0);  $$
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- ST_AsGeoJson(geography, precision, options) / version=1
-- Changed: 2.0.0 to use default args and named args
CREATE OR REPLACE FUNCTION ST_AsGeoJson(geog geography, maxdecimaldigits int4 DEFAULT 15, options int4 DEFAULT 0)
	RETURNS text
	AS $$ SELECT _ST_AsGeoJson(1, $1, $2, $3); $$
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- ST_AsGeoJson(version, geography, precision,options)
-- Changed: 2.0.0 to use default args and named args
CREATE OR REPLACE FUNCTION ST_AsGeoJson(gj_version int4, geog geography, maxdecimaldigits int4 DEFAULT 15, options int4 DEFAULT 0)
	RETURNS text
	AS $$ SELECT _ST_AsGeoJson($1, $2, $3, $4); $$
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- ---------- ---------- ---------- ---------- ---------- ---------- ----------
-- Measurement Functions
-- Availability: 1.5.0
-- ---------- ---------- ---------- ---------- ---------- ---------- ----------

-- Stop calculation and return immediately once distance is less than tolerance
-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION _ST_Distance(geography, geography, float8, boolean)
	RETURNS float8
	AS '$libdir/postgis-2.2','geography_distance'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;

-- Stop calculation and return immediately once distance is less than tolerance
-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION _ST_DWithin(geography, geography, float8, boolean)
	RETURNS boolean
	AS '$libdir/postgis-2.2','geography_dwithin'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;

-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION ST_Distance(geography, geography, boolean)
	RETURNS float8
	AS 'SELECT _ST_Distance($1, $2, 0.0, $3)'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Currently defaulting to spheroid calculations
-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION ST_Distance(geography, geography)
	RETURNS float8
	AS 'SELECT _ST_Distance($1, $2, 0.0, true)'
	LANGUAGE 'sql' IMMUTABLE STRICT;
	
-- Availability: 1.5.0 - this is just a hack to prevent unknown from causing ambiguous name because of geography
CREATE OR REPLACE FUNCTION ST_Distance(text, text)
	RETURNS float8 AS
	$$ SELECT ST_Distance($1::geometry, $2::geometry);  $$
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Only expands the bounding box, the actual geometry will remain unchanged, use with care.
-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION _ST_Expand(geography, float8)
	RETURNS geography
	AS '$libdir/postgis-2.2','geography_expand'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 50;

-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION ST_DWithin(geography, geography, float8, boolean)
	RETURNS boolean
	AS 'SELECT $1 && _ST_Expand($2,$3) AND $2 && _ST_Expand($1,$3) AND _ST_DWithin($1, $2, $3, $4)'
	LANGUAGE 'sql' IMMUTABLE;

-- Currently defaulting to spheroid calculations
-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION ST_DWithin(geography, geography, float8)
	RETURNS boolean
	AS 'SELECT $1 && _ST_Expand($2,$3) AND $2 && _ST_Expand($1,$3) AND _ST_DWithin($1, $2, $3, true)'
	LANGUAGE 'sql' IMMUTABLE;

-- Availability: 1.5.0 - this is just a hack to prevent unknown from causing ambiguous name because of geography
CREATE OR REPLACE FUNCTION ST_DWithin(text, text, float8)
	RETURNS boolean AS
	$$ SELECT ST_DWithin($1::geometry, $2::geometry, $3);  $$
	LANGUAGE 'sql' IMMUTABLE;


-- ---------- ---------- ---------- ---------- ---------- ---------- ----------
-- Distance/DWithin testing functions for cached operations.
-- For developer/tester use only.
-- ---------- ---------- ---------- ---------- ---------- ---------- ----------

-- Calculate the distance in geographics *without* using the caching code line or tree code
CREATE OR REPLACE FUNCTION _ST_DistanceUnCached(geography, geography, float8, boolean)
	RETURNS float8
	AS '$libdir/postgis-2.2','geography_distance_uncached'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;
	
-- Calculate the distance in geographics *without* using the caching code line or tree code
CREATE OR REPLACE FUNCTION _ST_DistanceUnCached(geography, geography, boolean)
	RETURNS float8
	AS 'SELECT _ST_DistanceUnCached($1, $2, 0.0, $3)'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Calculate the distance in geographics *without* using the caching code line or tree code
CREATE OR REPLACE FUNCTION _ST_DistanceUnCached(geography, geography)
	RETURNS float8
	AS 'SELECT _ST_DistanceUnCached($1, $2, 0.0, true)'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Calculate the distance in geographics using the circular tree code, but 
-- *without* using the caching code line
CREATE OR REPLACE FUNCTION _ST_DistanceTree(geography, geography, float8, boolean)
	RETURNS float8
	AS '$libdir/postgis-2.2','geography_distance_tree'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;

-- Calculate the distance in geographics using the circular tree code, but 
-- *without* using the caching code line
CREATE OR REPLACE FUNCTION _ST_DistanceTree(geography, geography)
	RETURNS float8
	AS 'SELECT _ST_DistanceTree($1, $2, 0.0, true)'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Calculate the dwithin relation *without* using the caching code line or tree code
CREATE OR REPLACE FUNCTION _ST_DWithinUnCached(geography, geography, float8, boolean)
	RETURNS boolean
	AS '$libdir/postgis-2.2','geography_dwithin_uncached'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;

-- Calculate the dwithin relation *without* using the caching code line or tree code
CREATE OR REPLACE FUNCTION _ST_DWithinUnCached(geography, geography, float8)
	RETURNS boolean
	AS 'SELECT $1 && _ST_Expand($2,$3) AND $2 && _ST_Expand($1,$3) AND _ST_DWithinUnCached($1, $2, $3, true)'
	LANGUAGE 'sql' IMMUTABLE;
	
-- ---------- ---------- ---------- ---------- ---------- ---------- ----------

-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION ST_Area(geog geography, use_spheroid boolean DEFAULT true)
	RETURNS float8
	AS '$libdir/postgis-2.2','geography_area'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;

-- Availability: 1.5.0 - this is just a hack to prevent unknown from causing ambiguous name because of geography
CREATE OR REPLACE FUNCTION ST_Area(text)
	RETURNS float8 AS
	$$ SELECT ST_Area($1::geometry);  $$
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION ST_Length(geog geography, use_spheroid boolean DEFAULT true)
	RETURNS float8
	AS '$libdir/postgis-2.2','geography_length'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;

-- Availability: 1.5.0 - this is just a hack to prevent unknown from causing ambiguous name because of geography
CREATE OR REPLACE FUNCTION ST_Length(text)
	RETURNS float8 AS
	$$ SELECT ST_Length($1::geometry);  $$
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION ST_Project(geog geography, distance float8, azimuth float8)
	RETURNS geography
	AS '$libdir/postgis-2.2','geography_project'
	LANGUAGE 'c' IMMUTABLE
	COST 100;

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION ST_Azimuth(geog1 geography, geog2 geography)
	RETURNS float8
	AS '$libdir/postgis-2.2','geography_azimuth'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION ST_Perimeter(geog geography, use_spheroid boolean DEFAULT true)
	RETURNS float8
	AS '$libdir/postgis-2.2','geography_perimeter'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;

-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION _ST_PointOutside(geography)
	RETURNS geography
	AS '$libdir/postgis-2.2','geography_point_outside'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Only implemented for polygon-over-point
-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION _ST_Covers(geography, geography)
	RETURNS boolean
	AS '$libdir/postgis-2.2','geography_covers'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;

-- Only implemented for polygon-over-point
-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION ST_Covers(geography, geography)
	RETURNS boolean
	AS 'SELECT $1 && $2 AND _ST_Covers($1, $2)'
	LANGUAGE 'sql' IMMUTABLE;

-- Availability: 1.5.0 - this is just a hack to prevent unknown from causing ambiguous name because of geography
CREATE OR REPLACE FUNCTION ST_Covers(text, text)
	RETURNS boolean AS
	$$ SELECT ST_Covers($1::geometry, $2::geometry);  $$
	LANGUAGE 'sql' IMMUTABLE ;

-- Only implemented for polygon-over-point
-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION ST_CoveredBy(geography, geography)
	RETURNS boolean
	AS 'SELECT $1 && $2 AND _ST_Covers($2, $1)'
	LANGUAGE 'sql' IMMUTABLE ;

-- Availability: 1.5.0 - this is just a hack to prevent unknown from causing ambiguous name because of geography
CREATE OR REPLACE FUNCTION ST_CoveredBy(text, text)
	RETURNS boolean AS
	$$ SELECT ST_CoveredBy($1::geometry, $2::geometry);  $$
	LANGUAGE 'sql' IMMUTABLE ;

-- Availability: 2.1.0
CREATE OR REPLACE FUNCTION ST_Segmentize(geog geography, max_segment_length float8)
	RETURNS geography
	AS '$libdir/postgis-2.2','geography_segmentize'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;

-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION ST_Intersects(geography, geography)
	RETURNS boolean
	AS 'SELECT $1 && $2 AND _ST_Distance($1, $2, 0.0, false) < 0.00001'
	LANGUAGE 'sql' IMMUTABLE ;

-- Availability: 1.5.0 - this is just a hack to prevent unknown from causing ambiguous name because of geography
CREATE OR REPLACE FUNCTION ST_Intersects(text, text)
	RETURNS boolean AS
	$$ SELECT ST_Intersects($1::geometry, $2::geometry);  $$
	LANGUAGE 'sql' IMMUTABLE ;

-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION _ST_BestSRID(geography, geography)
	RETURNS integer
	AS '$libdir/postgis-2.2','geography_bestsrid'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION _ST_BestSRID(geography)
	RETURNS integer
	AS 'SELECT _ST_BestSRID($1,$1)'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION ST_Buffer(geography, float8)
	RETURNS geography
	AS 'SELECT geography(ST_Transform(ST_Buffer(ST_Transform(geometry($1), _ST_BestSRID($1)), $2), 4326))'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 1.5.0 - this is just a hack to prevent unknown from causing ambiguous name because of geography
CREATE OR REPLACE FUNCTION ST_Buffer(text, float8)
	RETURNS geometry AS
	$$ SELECT ST_Buffer($1::geometry, $2);  $$
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION ST_Intersection(geography, geography)
	RETURNS geography
	AS 'SELECT geography(ST_Transform(ST_Intersection(ST_Transform(geometry($1), _ST_BestSRID($1, $2)), ST_Transform(geometry($2), _ST_BestSRID($1, $2))), 4326))'
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 1.5.0 - this is just a hack to prevent unknown from causing ambiguous name because of geography
CREATE OR REPLACE FUNCTION ST_Intersection(text, text)
	RETURNS geometry AS
	$$ SELECT ST_Intersection($1::geometry, $2::geometry);  $$
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION ST_AsBinary(geography)
	RETURNS bytea
	AS '$libdir/postgis-2.2','LWGEOM_asBinary'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION ST_AsBinary(geography,text)
	RETURNS bytea AS
	$$ SELECT ST_AsBinary($1::geometry, $2);  $$
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION ST_AsEWKT(geography)
	RETURNS TEXT
	AS '$libdir/postgis-2.2','LWGEOM_asEWKT'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 2.0.0 - this is just a hack to prevent unknown from causing ambiguous name because of geography
CREATE OR REPLACE FUNCTION ST_AsEWKT(text)
	RETURNS text AS
	$$ SELECT ST_AsEWKT($1::geometry);  $$
	LANGUAGE 'sql' IMMUTABLE STRICT;

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION GeometryType(geography)
	RETURNS text
	AS '$libdir/postgis-2.2', 'LWGEOM_getTYPE'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION ST_Summary(geography)
	RETURNS text
	AS '$libdir/postgis-2.2', 'LWGEOM_summary'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 2.1.0
CREATE OR REPLACE FUNCTION ST_GeoHash(geog geography, maxchars int4 DEFAULT 0)
	RETURNS TEXT
	AS '$libdir/postgis-2.2', 'ST_GeoHash'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 2.2.0
CREATE OR REPLACE FUNCTION ST_SRID(geog geography)
	RETURNS int4
	AS '$libdir/postgis-2.2', 'LWGEOM_get_srid'
	LANGUAGE 'c' IMMUTABLE STRICT;
	
-- Availability: 2.2.0
CREATE OR REPLACE FUNCTION ST_SetSRID(geog geography, srid int4)
	RETURNS geography
	AS '$libdir/postgis-2.2', 'LWGEOM_set_srid'
	LANGUAGE 'c' IMMUTABLE STRICT;
  
-----------------------------------------------------------------------------




-- Availability: 2.2.0
CREATE OR REPLACE FUNCTION ST_DistanceSphere(geom1 geometry, geom2 geometry)
	RETURNS FLOAT8
	AS $$
	select st_distance(geography($1),geography($2),false)
	$$
	LANGUAGE 'sql' IMMUTABLE STRICT
	COST 300;

-- Availability: 1.2.2
-- Deprecation in 2.2.0
CREATE OR REPLACE FUNCTION ST_distance_sphere(geom1 geometry, geom2 geometry)
	RETURNS FLOAT8 AS
  $$ SELECT _postgis_deprecate('ST_Distance_Sphere', 'ST_DistanceSphere', '2.2.0');
    SELECT ST_DistanceSphere($1,$2);
  $$
	LANGUAGE 'sql' IMMUTABLE STRICT
	COST 300;

---------------------------------------------------------------
-- GEOMETRY_COLUMNS view support functions
---------------------------------------------------------------
-- New helper function so we can keep list of valid geometry types in one place --
-- Maps old names to pramsey beautiful names but can take old name or new name as input
-- By default returns new name but can be overridden to return old name for old constraint like support
CREATE OR REPLACE FUNCTION postgis_type_name(geomname varchar, coord_dimension integer, use_new_name boolean DEFAULT true) 
	RETURNS varchar
AS
$$
 SELECT CASE WHEN $3 THEN new_name ELSE old_name END As geomname
 	FROM 
 	( VALUES
 		 ('GEOMETRY', 'Geometry', 2) ,
 		 	('GEOMETRY', 'GeometryZ', 3) ,
 		 	('GEOMETRY', 'GeometryZM', 4) ,
			('GEOMETRYCOLLECTION', 'GeometryCollection', 2) ,
			('GEOMETRYCOLLECTION', 'GeometryCollectionZ', 3) ,
			('GEOMETRYCOLLECTIONM', 'GeometryCollectionM', 3) ,
			('GEOMETRYCOLLECTION', 'GeometryCollectionZM', 4) ,
			
			('POINT', 'Point',2) ,
			('POINTM','PointM',3) ,
			('POINT', 'PointZ',3) ,
			('POINT', 'PointZM',4) ,
			
			('MULTIPOINT','MultiPoint',2) ,
			('MULTIPOINT','MultiPointZ',3) ,
			('MULTIPOINTM','MultiPointM',3) ,
			('MULTIPOINT','MultiPointZM',4) ,
			
			('POLYGON', 'Polygon',2) ,
			('POLYGON', 'PolygonZ',3) ,
			('POLYGONM', 'PolygonM',3) ,
			('POLYGON', 'PolygonZM',4) ,
			
			('MULTIPOLYGON', 'MultiPolygon',2) ,
			('MULTIPOLYGON', 'MultiPolygonZ',3) ,
			('MULTIPOLYGONM', 'MultiPolygonM',3) ,
			('MULTIPOLYGON', 'MultiPolygonZM',4) ,
			
			('MULTILINESTRING', 'MultiLineString',2) ,
			('MULTILINESTRING', 'MultiLineStringZ',3) ,
			('MULTILINESTRINGM', 'MultiLineStringM',3) ,
			('MULTILINESTRING', 'MultiLineStringZM',4) ,
			
			('LINESTRING', 'LineString',2) ,
			('LINESTRING', 'LineStringZ',3) ,
			('LINESTRINGM', 'LineStringM',3) ,
			('LINESTRING', 'LineStringZM',4) ,
			
			('CIRCULARSTRING', 'CircularString',2) ,
			('CIRCULARSTRING', 'CircularStringZ',3) ,
			('CIRCULARSTRINGM', 'CircularStringM',3) ,
			('CIRCULARSTRING', 'CircularStringZM',4) ,
			
			('COMPOUNDCURVE', 'CompoundCurve',2) ,
			('COMPOUNDCURVE', 'CompoundCurveZ',3) ,
			('COMPOUNDCURVEM', 'CompoundCurveM',3) ,
			('COMPOUNDCURVE', 'CompoundCurveZM',4) ,
			
			('CURVEPOLYGON', 'CurvePolygon',2) ,
			('CURVEPOLYGON', 'CurvePolygonZ',3) ,
			('CURVEPOLYGONM', 'CurvePolygonM',3) ,
			('CURVEPOLYGON', 'CurvePolygonZM',4) ,
			
			('MULTICURVE', 'MultiCurve',2 ) ,
			('MULTICURVE', 'MultiCurveZ',3 ) ,
			('MULTICURVEM', 'MultiCurveM',3 ) ,
			('MULTICURVE', 'MultiCurveZM',4 ) ,
			
			('MULTISURFACE', 'MultiSurface', 2) ,
			('MULTISURFACE', 'MultiSurfaceZ', 3) ,
			('MULTISURFACEM', 'MultiSurfaceM', 3) ,
			('MULTISURFACE', 'MultiSurfaceZM', 4) ,
			
			('POLYHEDRALSURFACE', 'PolyhedralSurface',2) ,
			('POLYHEDRALSURFACE', 'PolyhedralSurfaceZ',3) ,
			('POLYHEDRALSURFACEM', 'PolyhedralSurfaceM',3) ,
			('POLYHEDRALSURFACE', 'PolyhedralSurfaceZM',4) ,
			
			('TRIANGLE', 'Triangle',2) ,
			('TRIANGLE', 'TriangleZ',3) ,
			('TRIANGLEM', 'TriangleM',3) ,
			('TRIANGLE', 'TriangleZM',4) ,

			('TIN', 'Tin', 2),
			('TIN', 'TinZ', 3),
			('TIN', 'TinM', 3),
			('TIN', 'TinZM', 4) )
			 As g(old_name, new_name, coord_dimension)
		WHERE (upper(old_name) = upper($1) OR upper(new_name) = upper($1))
			AND coord_dimension = $2;
$$
LANGUAGE 'sql' IMMUTABLE STRICT COST 200;

-- Availability: 2.0.0
-- Deprecation in 2.2.0
CREATE OR REPLACE FUNCTION postgis_constraint_srid(geomschema text, geomtable text, geomcolumn text) RETURNS integer AS
$$
SELECT replace(replace(split_part(s.consrc, ' = ', 2), ')', ''), '(', '')::integer
		 FROM pg_class c, pg_namespace n, pg_attribute a, pg_constraint s
		 WHERE n.nspname = $1
		 AND c.relname = $2
		 AND a.attname = $3
		 AND a.attrelid = c.oid
		 AND s.connamespace = n.oid
		 AND s.conrelid = c.oid
		 AND a.attnum = ANY (s.conkey)
		 AND s.consrc LIKE '%srid(% = %';
$$
LANGUAGE 'sql' STABLE STRICT;

-- Availability: 2.0.0
-- Deprecation in 2.2.0
CREATE OR REPLACE FUNCTION postgis_constraint_dims(geomschema text, geomtable text, geomcolumn text) RETURNS integer AS
$$
SELECT  replace(split_part(s.consrc, ' = ', 2), ')', '')::integer
		 FROM pg_class c, pg_namespace n, pg_attribute a, pg_constraint s
		 WHERE n.nspname = $1
		 AND c.relname = $2
		 AND a.attname = $3
		 AND a.attrelid = c.oid
		 AND s.connamespace = n.oid
		 AND s.conrelid = c.oid
		 AND a.attnum = ANY (s.conkey)
		 AND s.consrc LIKE '%ndims(% = %';
$$
LANGUAGE 'sql' STABLE STRICT;

-- support function to pull out geometry type from constraint check
-- will return pretty name instead of ugly name
-- Availability: 2.0.0
-- Deprecation in 2.2.0
CREATE OR REPLACE FUNCTION postgis_constraint_type(geomschema text, geomtable text, geomcolumn text) RETURNS varchar AS
$$
SELECT  replace(split_part(s.consrc, '''', 2), ')', '')::varchar		
		 FROM pg_class c, pg_namespace n, pg_attribute a, pg_constraint s
		 WHERE n.nspname = $1
		 AND c.relname = $2
		 AND a.attname = $3
		 AND a.attrelid = c.oid
		 AND s.connamespace = n.oid
		 AND s.conrelid = c.oid
		 AND a.attnum = ANY (s.conkey)
		 AND s.consrc LIKE '%geometrytype(% = %';
$$
LANGUAGE 'sql' STABLE STRICT;

-- Availability: 2.0.0
-- Changed: 2.1.8 significant performance improvement for constraint based columns
-- Changed: 2.2.0 get rid of scheman, table, column cast to improve performance
CREATE OR REPLACE VIEW geometry_columns AS 
 SELECT current_database()::character varying(256) AS f_table_catalog,
    n.nspname AS f_table_schema,
    c.relname AS f_table_name,
    a.attname AS f_geometry_column,
    COALESCE(postgis_typmod_dims(a.atttypmod), sn.ndims, 2) AS coord_dimension,
    COALESCE(NULLIF(postgis_typmod_srid(a.atttypmod), 0), sr.srid, 0) AS srid,
    replace(replace(COALESCE(NULLIF(upper(postgis_typmod_type(a.atttypmod)), 'GEOMETRY'::text), st.type, 'GEOMETRY'::text), 'ZM'::text, ''::text), 'Z'::text, ''::text)::character varying(30) AS type
   FROM pg_class c
     JOIN pg_attribute a ON a.attrelid = c.oid AND NOT a.attisdropped
     JOIN pg_namespace n ON c.relnamespace = n.oid
     JOIN pg_type t ON a.atttypid = t.oid
     LEFT JOIN ( SELECT s.connamespace,
            s.conrelid,
            s.conkey, replace(split_part(s.consrc, ''''::text, 2), ')'::text, ''::text) As type
           FROM pg_constraint AS s
          WHERE s.consrc ~~* '%geometrytype(% = %'::text 
          
) st ON st.connamespace = n.oid AND st.conrelid = c.oid AND (a.attnum = ANY (st.conkey))
     LEFT JOIN ( SELECT s.connamespace,
            s.conrelid,
            s.conkey, replace(split_part(s.consrc, ' = '::text, 2), ')'::text, ''::text)::integer As ndims
           FROM pg_constraint AS s
          WHERE s.consrc ~~* '%ndims(% = %'::text
          
) sn ON sn.connamespace = n.oid AND sn.conrelid = c.oid AND (a.attnum = ANY (sn.conkey))
     LEFT JOIN ( SELECT s.connamespace,
            s.conrelid,
            s.conkey, replace(replace(split_part(s.consrc, ' = '::text, 2), ')'::text, ''::text), '('::text, ''::text)::integer As srid
           FROM pg_constraint AS s
          WHERE s.consrc ~~* '%srid(% = %'::text
          
) sr ON sr.connamespace = n.oid AND sr.conrelid = c.oid AND (a.attnum = ANY (sr.conkey))
  WHERE (c.relkind = ANY (ARRAY['r'::"char", 'v'::"char", 'm'::"char", 'f'::"char"])) 
  AND NOT c.relname = 'raster_columns'::name AND t.typname = 'geometry'::name 
  AND NOT pg_is_other_temp_schema(c.relnamespace) AND has_table_privilege(c.oid, 'SELECT'::text);


-- TODO: support RETURNING and raise a WARNING
CREATE OR REPLACE RULE geometry_columns_insert AS
        ON INSERT TO geometry_columns
        DO INSTEAD NOTHING;

-- TODO: raise a WARNING
CREATE OR REPLACE RULE geometry_columns_update AS
        ON UPDATE TO geometry_columns
        DO INSTEAD NOTHING;

-- TODO: raise a WARNING
CREATE OR REPLACE RULE geometry_columns_delete AS
        ON DELETE TO geometry_columns
        DO INSTEAD NOTHING;


---------------------------------------------------------------
-- 3D-functions
---------------------------------------------------------------

CREATE OR REPLACE FUNCTION ST_3DDistance(geom1 geometry, geom2 geometry)
	RETURNS float8
	AS '$libdir/postgis-2.2', 'distance3d'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;
	
CREATE OR REPLACE FUNCTION ST_3DMaxDistance(geom1 geometry, geom2 geometry)
	RETURNS float8
	AS '$libdir/postgis-2.2', 'LWGEOM_maxdistance3d'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;	

CREATE OR REPLACE FUNCTION ST_3DClosestPoint(geom1 geometry, geom2 geometry)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_closestpoint3d'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;

CREATE OR REPLACE FUNCTION ST_3DShortestLine(geom1 geometry, geom2 geometry)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_shortestline3d'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;

CREATE OR REPLACE FUNCTION ST_3DLongestLine(geom1 geometry, geom2 geometry)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_longestline3d'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;
	
CREATE OR REPLACE FUNCTION _ST_3DDWithin(geom1 geometry, geom2 geometry,float8)
	RETURNS boolean
	AS '$libdir/postgis-2.2', 'LWGEOM_dwithin3d'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;
	
CREATE OR REPLACE FUNCTION ST_3DDWithin(geom1 geometry, geom2 geometry,float8)
	RETURNS boolean
	AS 'SELECT $1 && ST_Expand($2,$3) AND $2 && ST_Expand($1,$3) AND _ST_3DDWithin($1, $2, $3)'
	LANGUAGE 'sql' IMMUTABLE
	COST 100;
	
CREATE OR REPLACE FUNCTION _ST_3DDFullyWithin(geom1 geometry, geom2 geometry,float8)
	RETURNS boolean
	AS '$libdir/postgis-2.2', 'LWGEOM_dfullywithin3d'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;
	
CREATE OR REPLACE FUNCTION ST_3DDFullyWithin(geom1 geometry, geom2 geometry,float8)
	RETURNS boolean
	AS 'SELECT $1 && ST_Expand($2,$3) AND $2 && ST_Expand($1,$3) AND _ST_3DDFullyWithin($1, $2, $3)'
	LANGUAGE 'sql' IMMUTABLE
	COST 100;

CREATE OR REPLACE FUNCTION _ST_3DIntersects(geom1 geometry, geom2 geometry)
	RETURNS boolean
	AS '$libdir/postgis-2.2','intersects3d'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;
	
CREATE OR REPLACE FUNCTION ST_3DIntersects(geom1 geometry, geom2 geometry)
	RETURNS boolean
	AS 'SELECT $1 && $2 AND _ST_3DIntersects($1, $2)'
	LANGUAGE 'sql' IMMUTABLE
	COST 100;
	
	
---------------------------------------------------------------
-- SQL-MM
---------------------------------------------------------------
-- PostGIS equivalent function: ST_ndims(geometry)
CREATE OR REPLACE FUNCTION ST_CoordDim(Geometry geometry)
	RETURNS smallint
	AS '$libdir/postgis-2.2', 'LWGEOM_ndims'
	LANGUAGE 'c' IMMUTABLE STRICT; 
--
-- SQL-MM
--
-- ST_CurveToLine(Geometry geometry, SegmentsPerQuarter integer)
--
-- Converts a given geometry to a linear geometry.  Each curveed
-- geometry or segment is converted into a linear approximation using
-- the given number of segments per quarter circle.
CREATE OR REPLACE FUNCTION ST_CurveToLine(geometry, integer)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_curve_segmentize'
	LANGUAGE 'c' IMMUTABLE STRICT;
--
-- SQL-MM
--
-- ST_CurveToLine(Geometry geometry, SegmentsPerQuarter integer)
--
-- Converts a given geometry to a linear geometry.  Each curveed
-- geometry or segment is converted into a linear approximation using
-- the default value of 32 segments per quarter circle
CREATE OR REPLACE FUNCTION ST_CurveToLine(geometry)
	RETURNS geometry AS 'SELECT ST_CurveToLine($1, 32)'
	LANGUAGE 'sql' IMMUTABLE STRICT;

CREATE OR REPLACE FUNCTION ST_HasArc(Geometry geometry)
	RETURNS boolean
	AS '$libdir/postgis-2.2', 'LWGEOM_has_arc'
	LANGUAGE 'c' IMMUTABLE STRICT;

CREATE OR REPLACE FUNCTION ST_LineToCurve(Geometry geometry)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_line_desegmentize'
	LANGUAGE 'c' IMMUTABLE STRICT;
	
-- Availability: 1.5.0
CREATE OR REPLACE FUNCTION _ST_OrderingEquals(GeometryA geometry, GeometryB geometry)
	RETURNS boolean
	AS '$libdir/postgis-2.2', 'LWGEOM_same'
	LANGUAGE 'c' IMMUTABLE STRICT
	COST 100;

-- Availability: 1.3.0
CREATE OR REPLACE FUNCTION ST_OrderingEquals(GeometryA geometry, GeometryB geometry)
	RETURNS boolean
	AS $$ 
	SELECT $1 ~= $2 AND _ST_OrderingEquals($1, $2)
	$$	
	LANGUAGE 'sql' IMMUTABLE; 
	
-------------------------------------------------------------------------------
-- SQL/MM - SQL Functions on type ST_Point
-------------------------------------------------------------------------------

-- PostGIS equivalent function: ST_MakePoint(XCoordinate float8,YCoordinate float8)
CREATE OR REPLACE FUNCTION ST_Point(float8, float8)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'LWGEOM_makepoint'
	LANGUAGE 'c' IMMUTABLE STRICT; 
	
-- PostGIS equivalent function: ST_MakePolygon(Geometry geometry)
CREATE OR REPLACE FUNCTION ST_Polygon(geometry, int)
	RETURNS geometry
	AS $$ 
	SELECT ST_SetSRID(ST_MakePolygon($1), $2)
	$$	
	LANGUAGE 'sql' IMMUTABLE STRICT; 
	
-- PostGIS equivalent function: GeomFromWKB(WKB bytea))
-- Note: Defaults to an SRID=-1, not 0 as per SQL/MM specs.
CREATE OR REPLACE FUNCTION ST_WKBToSQL(WKB bytea)
	RETURNS geometry
	AS '$libdir/postgis-2.2','LWGEOM_from_WKB'
	LANGUAGE 'c' IMMUTABLE STRICT; 
	
---
-- Linear referencing functions
---
-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION ST_LocateBetween(Geometry geometry, FromMeasure float8, ToMeasure float8, LeftRightOffset float8 default 0.0)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'ST_LocateBetween'
	LANGUAGE 'c' IMMUTABLE STRICT;
	
-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION ST_LocateAlong(Geometry geometry, Measure float8, LeftRightOffset float8 default 0.0)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'ST_LocateAlong'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Only accepts LINESTRING as parameters.
-- Availability: 1.4.0
CREATE OR REPLACE FUNCTION ST_LocateBetweenElevations(Geometry geometry, FromElevation float8, ToElevation float8)
	RETURNS geometry
	AS '$libdir/postgis-2.2', 'ST_LocateBetweenElevations'
	LANGUAGE 'c' IMMUTABLE STRICT;

-- Availability: 2.0.0
CREATE OR REPLACE FUNCTION ST_InterpolatePoint(Line geometry, Point geometry)
	RETURNS float8
	AS '$libdir/postgis-2.2', 'ST_InterpolatePoint'
	LANGUAGE 'c' IMMUTABLE STRICT;

---------------------------------------------------------------
-- END
---------------------------------------------------------------


---------------------------------------------------------------
-- USER CONTRIBUTED
---------------------------------------------------------------

-----------------------------------------------------------------------
-- ST_MinimumBoundingCircle(inputgeom geometry, segs_per_quarter integer)
-----------------------------------------------------------------------
-- Returns the smallest circle polygon that can fully contain a geometry
-- Defaults to 48 segs per quarter to approximate a circle
-- Contributed by Bruce Rindahl
-- Availability: 1.4.0
-----------------------------------------------------------------------
CREATE OR REPLACE FUNCTION ST_MinimumBoundingCircle(inputgeom geometry, segs_per_quarter integer DEFAULT 48)
	RETURNS geometry AS
$BODY$
	DECLARE
	hull GEOMETRY;
	ring GEOMETRY;
	center GEOMETRY;
	radius DOUBLE PRECISION;
	dist DOUBLE PRECISION;
	d DOUBLE PRECISION;
	idx1 integer;
	idx2 integer;
	l1 GEOMETRY;
	l2 GEOMETRY;
	p1 GEOMETRY;
	p2 GEOMETRY;
	a1 DOUBLE PRECISION;
	a2 DOUBLE PRECISION;


	BEGIN

	-- First compute the ConvexHull of the geometry
	hull = ST_ConvexHull(inputgeom);
	--A point really has no MBC
	IF ST_GeometryType(hull) = 'ST_Point' THEN
		RETURN hull;
	END IF;
	-- convert the hull perimeter to a linestring so we can manipulate individual points
	--If its already a linestring force it to a closed linestring
	ring = CASE WHEN ST_GeometryType(hull) = 'ST_LineString' THEN ST_AddPoint(hull, ST_StartPoint(hull)) ELSE ST_ExteriorRing(hull) END;

	dist = 0;
	-- Brute Force - check every pair
	FOR i in 1 .. (ST_NumPoints(ring)-2)
		LOOP
			FOR j in i .. (ST_NumPoints(ring)-1)
				LOOP
				d = ST_Distance(ST_PointN(ring,i),ST_PointN(ring,j));
				-- Check the distance and update if larger
				IF (d > dist) THEN
					dist = d;
					idx1 = i;
					idx2 = j;
				END IF;
			END LOOP;
		END LOOP;

	-- We now have the diameter of the convex hull.  The following line returns it if desired.
	-- RETURN ST_MakeLine(ST_PointN(ring,idx1),ST_PointN(ring,idx2));

	-- Now for the Minimum Bounding Circle.  Since we know the two points furthest from each
	-- other, the MBC must go through those two points. Start with those points as a diameter of a circle.

	-- The radius is half the distance between them and the center is midway between them
	radius = ST_Distance(ST_PointN(ring,idx1),ST_PointN(ring,idx2)) / 2.0;
	center = ST_LineInterpolatePoint(ST_MakeLine(ST_PointN(ring,idx1),ST_PointN(ring,idx2)),0.5);

	-- Loop through each vertex and check if the distance from the center to the point
	-- is greater than the current radius.
	FOR k in 1 .. (ST_NumPoints(ring)-1)
		LOOP
		IF(k <> idx1 and k <> idx2) THEN
			dist = ST_Distance(center,ST_PointN(ring,k));
			IF (dist > radius) THEN
				-- We have to expand the circle.  The new circle must pass trhough
				-- three points - the two original diameters and this point.

				-- Draw a line from the first diameter to this point
				l1 = ST_Makeline(ST_PointN(ring,idx1),ST_PointN(ring,k));
				-- Compute the midpoint
				p1 = ST_LineInterpolatePoint(l1,0.5);
				-- Rotate the line 90 degrees around the midpoint (perpendicular bisector)
				l1 = ST_Rotate(l1,pi()/2,p1);
				--  Compute the azimuth of the bisector
				a1 = ST_Azimuth(ST_PointN(l1,1),ST_PointN(l1,2));
				--  Extend the line in each direction the new computed distance to insure they will intersect
				l1 = ST_AddPoint(l1,ST_Makepoint(ST_X(ST_PointN(l1,2))+sin(a1)*dist,ST_Y(ST_PointN(l1,2))+cos(a1)*dist),-1);
				l1 = ST_AddPoint(l1,ST_Makepoint(ST_X(ST_PointN(l1,1))-sin(a1)*dist,ST_Y(ST_PointN(l1,1))-cos(a1)*dist),0);

				-- Repeat for the line from the point to the other diameter point
				l2 = ST_Makeline(ST_PointN(ring,idx2),ST_PointN(ring,k));
				p2 = ST_LineInterpolatePoint(l2,0.5);
				l2 = ST_Rotate(l2,pi()/2,p2);
				a2 = ST_Azimuth(ST_PointN(l2,1),ST_PointN(l2,2));
				l2 = ST_AddPoint(l2,ST_Makepoint(ST_X(ST_PointN(l2,2))+sin(a2)*dist,ST_Y(ST_PointN(l2,2))+cos(a2)*dist),-1);
				l2 = ST_AddPoint(l2,ST_Makepoint(ST_X(ST_PointN(l2,1))-sin(a2)*dist,ST_Y(ST_PointN(l2,1))-cos(a2)*dist),0);

				-- The new center is the intersection of the two bisectors
				center = ST_Intersection(l1,l2);
				-- The new radius is the distance to any of the three points
				radius = ST_Distance(center,ST_PointN(ring,idx1));
			END IF;
		END IF;
		END LOOP;
	--DONE!!  Return the MBC via the buffer command
	RETURN ST_Buffer(center,radius,segs_per_quarter);

	END;
$BODY$
	LANGUAGE 'plpgsql' IMMUTABLE STRICT;

 
-- ST_ConcaveHull and Helper functions starts here --
-----------------------------------------------------------------------
-- Contributed by Regina Obe and Leo Hsu
-- Availability: 2.0.0
-----------------------------------------------------------------------
CREATE OR REPLACE FUNCTION _st_concavehull(param_inputgeom geometry)
  RETURNS geometry AS
$$
	DECLARE     
	vexhull GEOMETRY;
	var_resultgeom geometry;
	var_inputgeom geometry;
	vexring GEOMETRY;
	cavering GEOMETRY;
	cavept geometry[];
	seglength double precision;
	var_tempgeom geometry;
	scale_factor integer := 1;
	i integer;
	
	BEGIN

		-- First compute the ConvexHull of the geometry
		vexhull := ST_ConvexHull(param_inputgeom);
		var_inputgeom := param_inputgeom;
		--A point really has no concave hull
		IF ST_GeometryType(vexhull) = 'ST_Point' OR ST_GeometryType(vexHull) = 'ST_LineString' THEN
			RETURN vexhull;
		END IF;

		-- convert the hull perimeter to a linestring so we can manipulate individual points
		vexring := CASE WHEN ST_GeometryType(vexhull) = 'ST_LineString' THEN vexhull ELSE ST_ExteriorRing(vexhull) END;
		IF abs(ST_X(ST_PointN(vexring,1))) < 1 THEN --scale the geometry to prevent stupid precision errors - not sure it works so make low for now
			scale_factor := 100;
			vexring := ST_Scale(vexring, scale_factor,scale_factor);
			var_inputgeom := ST_Scale(var_inputgeom, scale_factor, scale_factor);
			--RAISE NOTICE 'Scaling';
		END IF;
		seglength := ST_Length(vexring)/least(ST_NPoints(vexring)*2,1000) ;

		vexring := ST_Segmentize(vexring, seglength);
		-- find the point on the original geom that is closest to each point of the convex hull and make a new linestring out of it.
		cavering := ST_Collect(
			ARRAY(

				SELECT 
					ST_ClosestPoint(var_inputgeom, pt ) As the_geom
					FROM (
						SELECT  ST_PointN(vexring, n ) As pt, n
							FROM 
							generate_series(1, ST_NPoints(vexring) ) As n
						) As pt
				
				)
			)
		; 
		

		var_resultgeom := ST_MakeLine(geom) 
			FROM ST_Dump(cavering) As foo;

		IF ST_IsSimple(var_resultgeom) THEN
			var_resultgeom := ST_MakePolygon(var_resultgeom);
			--RAISE NOTICE 'is Simple: %', var_resultgeom;
		ELSE 
			--RAISE NOTICE 'is not Simple: %', var_resultgeom;
			var_resultgeom := ST_ConvexHull(var_resultgeom);
		END IF;
		
		IF scale_factor > 1 THEN -- scale the result back
			var_resultgeom := ST_Scale(var_resultgeom, 1/scale_factor, 1/scale_factor);
		END IF;
		RETURN var_resultgeom;
	
	END;
$$
  LANGUAGE plpgsql IMMUTABLE STRICT;
  
CREATE OR REPLACE FUNCTION ST_ConcaveHull(param_geom geometry, param_pctconvex float, param_allow_holes boolean DEFAULT false) RETURNS geometry AS
$$
	DECLARE
		var_convhull geometry := ST_ConvexHull(param_geom);
		var_param_geom geometry := param_geom;
		var_initarea float := ST_Area(var_convhull);
		var_newarea float := var_initarea;
		var_div integer := 6; 
		var_tempgeom geometry;
		var_tempgeom2 geometry;
		var_cent geometry;
		var_geoms geometry[4]; 
		var_enline geometry;
		var_resultgeom geometry;
		var_atempgeoms geometry[];
		var_buf float := 1; 
	BEGIN
		-- We start with convex hull as our base
		var_resultgeom := var_convhull;
		
		IF param_pctconvex = 1 THEN
			return var_resultgeom;
		ELSIF ST_GeometryType(var_param_geom) = 'ST_Polygon' THEN -- it is as concave as it is going to get
			IF param_allow_holes THEN -- leave the holes
				RETURN var_param_geom;
			ELSE -- remove the holes
				var_resultgeom := ST_MakePolygon(ST_ExteriorRing(var_param_geom));
				RETURN var_resultgeom;
			END IF;
		END IF;
		IF ST_Dimension(var_resultgeom) > 1 AND param_pctconvex BETWEEN 0 and 0.98 THEN
		-- get linestring that forms envelope of geometry
			var_enline := ST_Boundary(ST_Envelope(var_param_geom));
			var_buf := ST_Length(var_enline)/1000.0;
			IF ST_GeometryType(var_param_geom) = 'ST_MultiPoint' AND ST_NumGeometries(var_param_geom) BETWEEN 4 and 200 THEN
			-- we make polygons out of points since they are easier to cave in. 
			-- Note we limit to between 4 and 200 points because this process is slow and gets quadratically slow
				var_buf := sqrt(ST_Area(var_convhull)*0.8/(ST_NumGeometries(var_param_geom)*ST_NumGeometries(var_param_geom)));
				var_atempgeoms := ARRAY(SELECT geom FROM ST_DumpPoints(var_param_geom));
				-- 5 and 10 and just fudge factors
				var_tempgeom := ST_Union(ARRAY(SELECT geom
						FROM (
						-- fuse near neighbors together
						SELECT DISTINCT ON (i) i,  ST_Distance(var_atempgeoms[i],var_atempgeoms[j]), ST_Buffer(ST_MakeLine(var_atempgeoms[i], var_atempgeoms[j]) , var_buf*5, 'quad_segs=3') As geom
								FROM generate_series(1,array_upper(var_atempgeoms, 1)) As i
									INNER JOIN generate_series(1,array_upper(var_atempgeoms, 1)) As j 
										ON (
								 NOT ST_Intersects(var_atempgeoms[i],var_atempgeoms[j])
									AND ST_DWithin(var_atempgeoms[i],var_atempgeoms[j], var_buf*10)
									)
								UNION ALL
						-- catch the ones with no near neighbors
								SELECT i, 0, ST_Buffer(var_atempgeoms[i] , var_buf*10, 'quad_segs=3') As geom
								FROM generate_series(1,array_upper(var_atempgeoms, 1)) As i
									LEFT JOIN generate_series(ceiling(array_upper(var_atempgeoms,1)/2)::integer,array_upper(var_atempgeoms, 1)) As j 
										ON (
								 NOT ST_Intersects(var_atempgeoms[i],var_atempgeoms[j])
									AND ST_DWithin(var_atempgeoms[i],var_atempgeoms[j], var_buf*10) 
									)
									WHERE j IS NULL
								ORDER BY 1, 2
							) As foo	) );
				IF ST_IsValid(var_tempgeom) AND ST_GeometryType(var_tempgeom) = 'ST_Polygon' THEN
					var_tempgeom := ST_ForceSFS(ST_Intersection(var_tempgeom, var_convhull));
					IF param_allow_holes THEN
						var_param_geom := var_tempgeom;
					ELSE
						var_param_geom := ST_MakePolygon(ST_ExteriorRing(var_tempgeom));
					END IF;
					return var_param_geom;
				ELSIF ST_IsValid(var_tempgeom) THEN
					var_param_geom := ST_ForceSFS(ST_Intersection(var_tempgeom, var_convhull));	
				END IF;
			END IF;

			IF ST_GeometryType(var_param_geom) = 'ST_Polygon' THEN
				IF NOT param_allow_holes THEN
					var_param_geom := ST_MakePolygon(ST_ExteriorRing(var_param_geom));
				END IF;
				return var_param_geom;
			END IF;
            var_cent := ST_Centroid(var_param_geom);
            IF (ST_XMax(var_enline) - ST_XMin(var_enline) ) > var_buf AND (ST_YMax(var_enline) - ST_YMin(var_enline) ) > var_buf THEN
                    IF ST_Dwithin(ST_Centroid(var_convhull) , ST_Centroid(ST_Envelope(var_param_geom)), var_buf/2) THEN
                -- If the geometric dimension is > 1 and the object is symettric (cutting at centroid will not work -- offset a bit)
                        var_cent := ST_Translate(var_cent, (ST_XMax(var_enline) - ST_XMin(var_enline))/1000,  (ST_YMAX(var_enline) - ST_YMin(var_enline))/1000);
                    ELSE
                        -- uses closest point on geometry to centroid. I can't explain why we are doing this
                        var_cent := ST_ClosestPoint(var_param_geom,var_cent);
                    END IF;
                    IF ST_DWithin(var_cent, var_enline,var_buf) THEN
                        var_cent := ST_centroid(ST_Envelope(var_param_geom));
                    END IF;
                    -- break envelope into 4 triangles about the centroid of the geometry and returned the clipped geometry in each quadrant
                    FOR i in 1 .. 4 LOOP
                       var_geoms[i] := ST_MakePolygon(ST_MakeLine(ARRAY[ST_PointN(var_enline,i), ST_PointN(var_enline,i+1), var_cent, ST_PointN(var_enline,i)]));
                       var_geoms[i] := ST_ForceSFS(ST_Intersection(var_param_geom, ST_Buffer(var_geoms[i],var_buf)));
                       IF ST_IsValid(var_geoms[i]) THEN 
                            
                       ELSE
                            var_geoms[i] := ST_BuildArea(ST_MakeLine(ARRAY[ST_PointN(var_enline,i), ST_PointN(var_enline,i+1), var_cent, ST_PointN(var_enline,i)]));
                       END IF; 
                    END LOOP;
                    var_tempgeom := ST_Union(ARRAY[ST_ConvexHull(var_geoms[1]), ST_ConvexHull(var_geoms[2]) , ST_ConvexHull(var_geoms[3]), ST_ConvexHull(var_geoms[4])]); 
                    --RAISE NOTICE 'Curr vex % ', ST_AsText(var_tempgeom);
                    IF ST_Area(var_tempgeom) <= var_newarea AND ST_IsValid(var_tempgeom)  THEN --AND ST_GeometryType(var_tempgeom) ILIKE '%Polygon'
                        
                        var_tempgeom := ST_Buffer(ST_ConcaveHull(var_geoms[1],least(param_pctconvex + param_pctconvex/var_div),true),var_buf, 'quad_segs=2');
                        FOR i IN 1 .. 4 LOOP
                            var_geoms[i] := ST_Buffer(ST_ConcaveHull(var_geoms[i],least(param_pctconvex + param_pctconvex/var_div),true), var_buf, 'quad_segs=2');
                            IF ST_IsValid(var_geoms[i]) Then
                                var_tempgeom := ST_Union(var_tempgeom, var_geoms[i]);
                            ELSE
                                RAISE NOTICE 'Not valid % %', i, ST_AsText(var_tempgeom);
                                var_tempgeom := ST_Union(var_tempgeom, ST_ConvexHull(var_geoms[i]));
                            END IF; 
                        END LOOP;

                        --RAISE NOTICE 'Curr concave % ', ST_AsText(var_tempgeom);
                        IF ST_IsValid(var_tempgeom) THEN
                            var_resultgeom := var_tempgeom;
                        END IF;
                        var_newarea := ST_Area(var_resultgeom);
                    ELSIF ST_IsValid(var_tempgeom) THEN
                        var_resultgeom := var_tempgeom;
                    END IF;

                    IF ST_NumGeometries(var_resultgeom) > 1  THEN
                        var_tempgeom := _ST_ConcaveHull(var_resultgeom);
                        IF ST_IsValid(var_tempgeom) AND ST_GeometryType(var_tempgeom) ILIKE 'ST_Polygon' THEN
                            var_resultgeom := var_tempgeom;
                        ELSE
                            var_resultgeom := ST_Buffer(var_tempgeom,var_buf, 'quad_segs=2');
                        END IF;
                    END IF;
                    IF param_allow_holes = false THEN 
                    -- only keep exterior ring since we do not want holes
                        var_resultgeom := ST_MakePolygon(ST_ExteriorRing(var_resultgeom));
                    END IF;
                ELSE
                    var_resultgeom := ST_Buffer(var_resultgeom,var_buf);
                END IF;
                var_resultgeom := ST_ForceSFS(ST_Intersection(var_resultgeom, ST_ConvexHull(var_param_geom)));
            ELSE
                -- dimensions are too small to cut
                var_resultgeom := _ST_ConcaveHull(var_param_geom);
            END IF;
            RETURN var_resultgeom;
	END;
$$
LANGUAGE 'plpgsql' IMMUTABLE STRICT;
-- ST_ConcaveHull and Helper functions end here --

-----------------------------------------------------------------------
-- X3D OUTPUT
-----------------------------------------------------------------------
-- _ST_AsX3D(version, geom, precision, option, attribs)
CREATE OR REPLACE FUNCTION _ST_AsX3D(int4, geometry, int4, int4, text)
	RETURNS TEXT
	AS '$libdir/postgis-2.2','LWGEOM_asX3D'
	LANGUAGE 'c' IMMUTABLE;
	
-- ST_AsX3D(geom, precision, options)
CREATE OR REPLACE FUNCTION ST_AsX3D(geom geometry, maxdecimaldigits integer DEFAULT 15, options integer DEFAULT 0)
	RETURNS TEXT
	AS $$SELECT _ST_AsX3D(3,$1,$2,$3,'');$$
	LANGUAGE 'sql' IMMUTABLE;

-- make views and spatial_ref_sys public viewable --
GRANT SELECT ON TABLE geography_columns TO public;
GRANT SELECT ON TABLE geometry_columns TO public;
GRANT SELECT ON TABLE spatial_ref_sys TO public;

COMMIT;
